AutoCAD 2013 :: Remove OVERKILL Functionality From Block Editor?
Aug 22, 2012Did Autodesk remove OVERKILL functionality from the block editor?
View 1 Replies
ADVERTISEMENT
AutoCAD 2013 :: Block Editor Toolbar
Sep 18, 2013Running 2014 plain Jane. I have the ribbon turned off. Sometimes (a lot) when I double click a block to edit it my Block Editor Toolbar does not come on. And it is not listed in the acad list of tool bars.
View 9 Replies View RelatedAutoCAD 2013 :: UCS Rotated In Block Editor?
Jan 4, 2013I am working with 2013 in 2D
Somehow I switched my UCS without noticing from X,Y,X to Z,Y,X. Though the UCS was changed my layout never switched orientation (flat square remained flat square and did not turn into a line).
I was alerted to the error when inserting the blocks. Half of the blocks were showing up as thin lines (in the Z plane) and half where showing up in the X plane.
I was able to correct the UCS by typing UCS, world view, then PLAN, current.
My question now: How can I fix the blocks that where "created" in the Z plane so that they can be inserted into the X plane without having to 'rotate3d' every time I insert a block?
AutoCAD 2013 :: Exiting Block Editor
Jun 5, 2012When I close and save my block from the block editor, AutoCAD send me to 0,0. I then have to zoom extents and then zoom back to where I was working from.
View 2 Replies View RelatedAutoCAD 2013 :: Slow After Exiting Block Editor?
Oct 10, 2012I recently discovered that my AutoCAD would become slow, and selection very choppy, after exiting the block editor. Running a purge, audit or regenall does not solve the problem. I have to quit the program and restart. I've also noticed that this has been happening since 2007. It is not my computer, as I am running Windows 7 x64, with AutoCAD 64 bit.
View 2 Replies View RelatedAutoCAD 2013 :: Errors While Working In Block Editor
May 7, 2012I was trying to edit a dynamic block that made with an earlier version and that had multiple visibility layers and when I would make changes in one visibility layer the change would be in the another layer and poly lines did not have grip points, and insert block would simply disappear. I think there is a serious glitch there.
View 3 Replies View RelatedAutoCAD LT :: 2013 Crashes Every Time When Trying To Go To Block Editor
May 23, 2012Having problems with the block editor in AutoCAD 2013 LT. I crash everytime I try to open a block in it????
View 9 Replies View RelatedAutoCAD 2013 :: Block Editor 3DRotate / New UCS And Visual Styles
Aug 15, 2012Why the following options are disabled in the block editor.
3drotate
new ucs
visual styles
Where I can find a improved block editor plug-in.
AutoCAD 2013 :: Block Editor Visibility State - Editing Old Blocks
May 28, 2012I installed Autocad 2013 a few weeks ago and I have a lot of blocks made with earlier versions (2008, 2012, etc...) that I need to use. When I try to edit such a block, block editor gives me trouble with visibility states. I can't select visibility states, and when I can, the changes made to that state don't follow and often the program reverts back to the first visibility state for no reason. This is getting to be extremely annoying and I'm thinking of going back to 2012 because of this. Is there a patch or some way to correct this?
View 4 Replies View RelatedAutoCAD 2013 :: Controlling The Pickbox Size When Working In The Block Editor Mode?
Feb 15, 2013Controlling the “pickbox size” when working in the “block editor” mode,
I couldn’t know how to increase the size of the pickbox while working in “block editor” mode.
In the regular case, the pickbox size is controlled from the option dialogue box
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2013 :: Remove All Of A Block Attribute
Nov 20, 2013I have a several drawings from an outside source. There are blocks in the drawing which I can not remove the attributes. I have tried exploding, erasing, and redefining block. This doesn't seem to remove all the attributes. That is I erase all the attritube that I can see while editing in place. When I save new defintion I have it replace existing block.One attribute remains.
I have tried to use Battman and resync. It allows me to remove all the attributes except one.Point is, I would like to keep the current blocks cleaned up in the drawing without having to go to each and put a new block and remove the old. Not sure of the origin of these blocks.I believe they came from an AutoDesk AEC source and may have been XREF into drawing.
AutoCAD 2013 :: Rotate UCS Around Z-axis Only - Functionality Gone?
Dec 4, 2013This week I upgraded from 2011 to 2014 and have noticed a major change in rotating the UCS around only the Z-axis.
Looking at the attached image (the blue box is just to represent the relationship between the pipes):
I want to, as a simple example, rotate the UCS around the Z-axis from the end of one pipe to the end of the other.
In 2011 UCS, Z would allow me to select the end of one pipe and the end of the other and rotate to the angle of the red line shown.
In 2014 UCS, Z rotates the UCS from some unrelated point.
In 2014 UCS then selecting the two ends rotates the UCS X-axis to the direct line between the two.
In a working scenario the end of the two pipes would be in vastly different positions. Drawing a line between them, flattening it then using UCS, E on the flattened line give the functionality I want, but is a very slow way of doing it.
there is no way of selecting 2 points for a Z-axis rotation.
TL;DR
In 2011 if I wanted to rotate the UCS around the Z-axis I would type UCS, Z then select 2 points and the UCS would rotate around the Z-axis but the X & Y axis would remain as it was. This is no longer the case in 2014, how do I do this now?
AutoCAD LT :: Block Editor Saves Block But When Closing Says Changes Haven't Been Saved?
Mar 28, 2013I have created a bock in ACAD 2011 LT. I then save the block using the command line or ribbon button then immediately try to close the block editor without moving or changing anything. A dialog appears saying the changes have not been saved to the block and would I like to save? If I say no don't save my changes and reopen the block the changes have in fact been saved.
My question is there a way to get around this dialog box -Suppress it like FILEDIA = 0 for block editor or an option so it doesn't ask me to save.
The goal is to do this all from the command line w/ out dialog boxes.
AutoCad :: Attribute In Title Block Exists In Block Editor But Not In Project
Sep 6, 2012Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
AutoCAD Dynamic Blocks :: Actions And Parameter Grips Obscure Drawing-block In Block Editor
Mar 28, 2011My drawing- block is a little bit complicated, it contains few actions and parameters and everytime i open block editor to add, or to modify some action I can't see my drawing because actions grips and parameters grips obscure my drawing. I tried to refresh layout but it doesn't work.
please take a look on attached jpg.
AutoCad :: Clicking Block Go To Block Editor And Not Allow To Change Its Attributes
Oct 26, 2012When the block is in a drawing and I click it, it takes me to block editor.
However if I go to it in block editor and test block it allows me to change the attributes.
Why does clicking the block go to block editor and not allow me to change its attributes as it does when I test block.
AutoCad 2D :: Move Base Point Of Block In Block Editor?
Mar 20, 2009I want to move the base point of a block in the block editor. However, when I move it, the block moves accordingly in the drawing.
How can i move the base point in the editor, so that the block stays at the same position in the drawing.
AutoCad :: Editing A Block In Block Editor Mode
Apr 30, 2013I was in process of editing a block in "block editor" mode. I saved the dwg and exit instead of saving the block, exit block editor and then exit the dwg. When I opened again the dwg what I see on display is just the block. How to close the block and open the entire dwg?
View 2 Replies View RelatedAutoCad :: Add Some Attributes To Existing Block Using Block Editor
Dec 12, 2013I'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?
AutoCad :: Opening Block Editor Without Inserting Block First
Oct 16, 2012I have several blocks saved as separate .DWGs, some of which are dynamic. I want to review and test these blocks, but I can't find a way to open the existing block definitions in the Block Editor without first inserting the blocks into a drawing.
View 5 Replies View RelatedAutoCad :: Editing Title Block Using Block Editor
Aug 31, 2011I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View RelatedAutoCAD .NET :: How To Execute - Overkill Command Using Batch Process
Dec 12, 2012How to execute -Overkill command in autocad using batch process.
View 2 Replies View RelatedAutoCAD .NET :: Processing Overkill / API - Leaking Memory Running A Never Ending Loop
Jul 24, 2012I have a routine that runs a cycle through 36 large dynamic blocks, then finishes. Somewhere in this code I'm either leaking memory, running a never ending loop, or AutoCAD gets stuck on something. I have a 12gb machine, and this file only uses a few MB on the hard drive. So even after I save and close the file, AutoCAD is using 100% of 1 core CPU (4 core i7) in 0 drawing state stuck at 11gb of Memory (Private Working Set). So, What is this program doing in 0 drawing state, and how is my code responsible? I have to kill it with task manager.
<CommandMethod("SetCurveOffset")> _ Public Shared Sub SetCurveOffset() Try Dim doc As Document = AApplication.DocumentManager.MdiActiveDocument Dim db As Database = doc.Database Using lock As DocumentLock = doc.LockDocument() Using trans As Transaction = db.TransactionManager.StartTransaction Dim bt As BlockTable = trans.GetObject(db.BlockTableId, OpenMode.ForRead) Dim btrModelSpace As BlockTableRecord = trans.GetObject(bt(BlockTableRecord.ModelSpace), OpenMode.ForWrite) Dim curves As New List(Of
[code]..........
AutoCad 3D :: Can UCS Be Moved In Block Editor
Mar 20, 2013I am building finished piping assemblies from a collection of smaller parts I have been creating and saving with WBLOCK. I found a mistake on one of my parts(I needed to rotate a piece of pipe). Because the sub-part was part of the complete assembly, I could not rotate the sub-part independently so I opened the block in the block editor. Apparently, and this was my original question, UCS commands do not work in the block editor. The result of this fact was that I could not rotate the sub-assembly in the direction it needed to go. So first question: Can the UCS be moved in the block editor?It focused on exploding blocks that would not explode. I thought if I could simply explode the block back into its component parts, I could rotate the sub-assembly. This is where everything went to hell.
I am not even sure what happened but now I have a new definition of the block that will still not explode, references itself, includes other parts I don't want and is just generally making me PDM. I figure it will be easier to just delete the entire block and redraw the components rather than trying to fix my mess. I did try the undo command but it apparently will not undo the changes to the block definition. Second question: How do I remove all traces of a block saved with BLOCK and WBLOCK so I can start fresh?
Third question: I will not create another block until I learn more about them. Any reference related to intelligent block creation?
AutoCAD LT :: Dynamic Block Editor
May 30, 2013I haven't reviewed the recommended posts, but just a quick question. I am in the 'Dynamic Block Editor' command. I am trying to add a stretch application to the block (a simple section flag), and I have success up until the point where I save and go back into the drawing. There I do not get a pull-down tab and it will not allow me to stretch where I have defined the block through the 'Parameters' and 'Actions' tabs.
View 1 Replies View RelatedAutoCad :: Regen After Block Editor
Jul 6, 2010After I edit a block in the block editor, It regens to a blank black screen. Then I have to zoom extents and zoom back to where the block is. Is this normal? I would think it'd be better if it just put you back to where you were working. I understand the regen probably is necessary to change all the blocks that need to be updated. Just wonder why it puts you to a blank space.
View 7 Replies View RelatedAutoCad :: Block Editor Won't Open?
Aug 24, 2011I am currently using Autocad 2011 and my block editor suddenly won't open this morning... I have tried the blockeditlock to open it but nothing happens when I change the setting (0 or 1).
View 9 Replies View RelatedAutoCad :: How To Use Constrains In Block Editor
Aug 14, 2013The tube is a part of something bigger but this particular part is confusing me. When I want to change Distance 4 (in block editor you will see) and the tube diameter has change (something impossible in real world ). I have try to use constrains in block editor - for now without any succes.
tube_block2.dwg
P.S. I have tryied mline, it works, but I wonder if it works without mline (I don't like them).
AutoCAD LT :: Block Editor Not Showing Up (doubleclick)
Oct 14, 2013I just installed LT2013 and migratet my settings from LT2008.
Doubleclicking on a blok openes the block editor in LT2008, but not in LT2013.
In LT2008, the main cui file was acadlt.cui. And in this file the "block - double click" action was specified. And it worked in LT2008. I have my own cui-file which not contains any doubleclick-actions.
In LT2013, after migration from LT2008, the mail cui file is now my own cui-file (which not contains any doubleclick actions). Is this why it doesnt work ?
I have tryed to copy a doubleclickaction from acadlt.cui to "my own cui-file". And now it works.
Is this because "my " cui file now is the main cui file ? Why is "my" cui file the main cui file after migration ? is there a way to change, so acadlt.cui becomes the main cui file ?
If not, is there a way to transfer alle settings from acadlt.cui to "my" cui file ? I know i can do this one action of a time in "transfer".
AutoCAD .NET :: Go Over Open In Block Editor Message?
Oct 21, 2011I have few hundred drawings ( used as symbols) I have to update; the issue I have is that many of them are dynamic blocks. When I process them, the program stops when opening one of those drawings having authoring elements. Is there any way to go over that message instead of clicking "No" every time?
View 4 Replies View RelatedAutoCAD 2010 :: New Block Editor Is Not Working?
Apr 23, 2012The new block editor is not working for me;
In the old cad we had the block editor where you can add and remove entities from the block; how will I do that now?