When I try to email an image from the trial version of PSP X4 I get the following error message:
"One or more unspecified errors occurred. No message sent."
The message comes up after the initial preparation of the image is completed and the program goes to link with the email (standard MS Mail in Vista).
Just a heads up on an old issue which still exists in the burning module of X4. Apparently nothing has been updated from X2 other than reintegrating it with the editing software. Unspecified is maddeningly vague but If you get this message during the authoring stage it may be due to a glitch in some of the menu templates. I have found that using certain menu templates if you uncheck the "motion menu" box it will crash the production at the final stage with this message occurring. If this happens you must leave the motion menu box checked (which is the template default) even though you aren't using a motion menu. It appears to have no effect on the finished product. I have found this glitch with a number of the text menu templates that I like to use. I know it took me some effort to figure this out back in X2.
View 14 Replies View RelatedJust upgraded from X3 to X4, software initialy worked fine, then I installed the KPT add in and now I get the following error message when attempting to view any pictures...An error has occureed while trying to read from the file.
View 1 Replies View RelatedI have installed my PSP X4 and from what i see it looks great, faster loading, but every time i click on a jpg i get the error message "an error has occurred while trying to read from the file"..i have looked in preferences and found nothing, i have reset it, and also tried ctr F8, but still cant get my jpgs to show to use them,
i have used PSP since about v5 and never had a problem like this before
Although Paint Shop Pro X4 runs the filters from Topaz Labs correctly on a single file, PSPX4 chokes when running the filters as part of a script in batch files. Not only was the program unable to apply the plug-ins correctly in a batch file, the errors were different depending on the plug-in.
I ran my tests on 8 JPG files with dimensions of 4021x3024 pix, file size averaging 2.8 MB. I then reduced the files to 800x600 pix dimensions and ran the same tests. Results were the same on both size groups. I recorded a script with only each Topaz filter, then tested the script on a single image. The script worked. The problems occurred when run in batch processing. I tested against another company's plug-in, running Alien Skin's Xenofex 2 Burnt Edges in a batch file with script on the 8 images with no problem. I also tested the same Topaz Labs filters in PhotoLine 16, recording and playing actions. The plug-ins ran perfectly in PhotoLine.
When batch processing was run in PSPX4, it was run with the test script selected and silent mode selected. Silent mode means the script should run from start to finish with no intervention by the user. Here's what happened in my tests.
Topaz Adjust 4 - Batch file runs correctly through 4 images, then the process freezes. The Windows Task Manager shows PSPX4 to be "running."
Topaz Detail 2 - Batch file runs correctly through 4 images, then the process freezes. The Windows Task Manager shows PSPX4 to be "running."
Topoaz Clean 3 - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz InFocus - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz Lens Effects - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz DeNoise 5 - Batch file runs for all 8 files, however Topaz window opens on each file, requiring user selection.
Today I took a flash drive with a smart fix adjusted photo on it to walmart. They use a Kodak Kiosk for reading flash drives and uploading pictures to their photo machine. The problem I had was when I took my flashdrive and plugged it into the kiosk....it did not pick up the file that had been adjusted using the smartfix feature in Paintshop Pro X4.....what if anything does this mean...
tdiddy0366
Is there anyway to shut off the notification window for errors occured during update? I am swapping parts in an assembly so I know constraints will have to be repaired, but it doesn't work that I have to click on the 'accept' button everytime I move an object
View 1 Replies View RelatedI've just installed Corel Draw X3 and I'm trying to run a plug-in to control my plotter. The plug-in is not in corel draw where it should be. I think the plug-in is supposed to run through visual basic. If I mouse down to visual basic in corel draw I get an error message that says "Microsoft Visual Basic errors occurred during load. So I'm thinking the problem is with the visual basic program, but it was installed in the corel draw disc. I'm running Windows 7 if that makes any difference.
View 9 Replies View RelatedI went into an assembly to change some parts and sub-assemblies and now everytime I move a part or constrain something I get this message "Errors Occurred During Update". Why is this happening?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I installed PSP X3 trial version to see if I actually wanted to buy it, but after installing it, I keep getting Not Responding when I try to open the program.I am running out of time on my trial time.
PS: I have the same problem with XI, so I reverted back to Jasc PSP9.
I am getting quite annoyed with COREL..Every time I open PSPX3U this message pops up clicking the box does nothing to prevent the message come up the next time I want to use PSPX3U.
View 2 Replies View RelatedI cannot get PaintShop Photo Pro X3 NL to start up anymore. Windows Task Manager shows PSP to have started up - as a service only. In the meanwhile, I do get this error message:
[Webbrowser:]
["Cannot find ...:/Users/Kanis/AppData/Roaming//Corel/Messages/540229901_907002/EN/MessageCache...
Check path of the internet address."]
(I'm running my PC in Dutch; so I translated it as correctly as possible).
This message appears from the very instant that I installed Corel WordPerfect X5 on my system, i.e. February 8, 2011. Then I uninstalled WP X5 completely. However, the above message keeps appearing, whenever I try to start Corel PaintShop Photo Project Creator or PSP X3.
In order to keep on going, I installed PSP X3 on a virtual machine on this PC (O/S: Windows XP 32 bits SP3 under VMware Workstation 7.1.4 ( under host W7 Ultimate 64 NL)). It works fine from the beginning, but this is not meant to be. Therefore, on June 6, I tried a fresh reinstall on PSP X3 on the main operating system (W7 Ultimate 64 NL). The problem persisted, as before. I then uninstalled ALL Corel applications from that system, went through the entire register and deleted all traces of Corel, PSP X3 and WP X5 applications. Expelled also all traces of PSI-Service related items (also from the register). Then I made a fresh reinstall of PSP X3, and it worked. Eureka ? Until this very morning. Same old story started all over again. So obviously I have not found the root of the problem. It must have been masked for some time. What is the source of the error message? And how come it causes PSP X3 to start as a service only, and not continue. Note: note even the start-up screen of PSP X3 does show up.
Where do I switch off the irritating "You have selected more than 10 files .." messages? I can't find it in Preferences>General Preferences>Warnings
View 2 Replies View RelatedJust recently, upon closing PSP x5, a message window pops up, the title area usually references using the e-learning center or "Explore more ways to learn and love photography", but the window itself is empty except for the message "Do not display this message again" with a checkbox and a Close button. The Close button does not work, nor does the red X close window button. I have to go into Task Manager to finish closing the program.
I'm on a Windows 8 machine and this just started happening after months of use.
I used to have all my photos on an external hard drive along with my lightroom catalog file. I recently transfered them all to my main harddrive on my imac and linked them and everything so they all show up and i can access them. However now when i try and export them they are saying "An unexpected end-of-file occured" and thats it. Also some of the photos have like a ulticolored streak through them and what not. They where literally working before i moved them...
View 1 Replies View Relatedwhy my Lightroom 4 program will not open? Yesterday it worked fine. Today I get a message that "an unexpected error occurred". If I try to repair the Lightroom 4 program in the control panel, I get the message "the feature you are trying to use is on a network resource that is unavailable". SO much of my work is sitting in those catalogs.
View 1 Replies View RelatedI have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies View RelatedI've been using Paint.net for a few years, but only with .jpg photos. I recently scanned some text as a .jpg and cannot figure out how to correct some spelling errors.
Also, the paper I scanned was far removed from the original, so the white blank areas are full of black artifacts. Is there some way to have Paint.net recognize the actual test so I can have a clean text copy?
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View RelatedI installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedIs there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedMy program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View Relatedif is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies View RelatedI want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
Just got CS 6 (not extended) When I click Oil Paint Filter I get the following msg.
The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check manufacturer for the latest software.
Is it my graphics card. If so, how do I check to see what I have? I have an HP about three years old.
is there any way to send an immage from the canvas to a email message.
View 2 Replies View RelatedI am doing a lot of saving new files over old ones. I am sick of the warning message that pops up having a default answer of 'NO' when I go to replace the files. Is there a way to change the default to 'YES' , or get rid of the message altogether?
View 1 Replies View RelatedI I have VideoStudio Pro X5. I installed it and tried to open. But it became fail. So I retried it by using administrator mood. But it also useless. Then I re installed it. But the problem is same,
At sometime, when I tried to open it, It appears welcome window like this,
On Windows 7 OS (64bit) getting the following error when attempting to burn a DVD: Unspecified error 5:0:0
I've attached a jpeg image containing the error.
Tried looking in the knowledgbase, but of course it's under construction. Tried contacting support, but of course the chat system is down. Then to add insult to injury, friggin Corel wants to charge me $15 to describe to them this burn error on their product. If I had known that this was the quality of product and level of support I was going to receive, I never would have purchased this product.
System info:
Box: Shuttle Inc SG45 V10
OS: Windows 7 Ultimate (x64) (build 7600)
CPU: 2.67 gigahertz Intel Core2 Quad Q9400
RAM: 8GB
Disc: 1.5TB (spread across 3 discs)
I am getting the same error trying to burn a BluRay. The preview looks perfect, but I just keep making expensive coasters. When burning DVD's is to create a "Disc Image" first, but when I try this for a BluRay, that option is greyed out and not selectable.
How to create a BluRay image file so I can access it from the tools menu and choose "Burn from disc image"? What is causing the 'unspecified error" when trying to burn a BluRay?
Have burned several projects with X4 and this is the first time I have come across the unspecified error during the burning process.
Empty time line
Create Disk
DVD
Add VS Project
Project Settings
Do not convert (check)
Treat MPEG audio as non-DVD compliant (check)
Auto repeat when disk playback ends (check)
Upper field First
No motion menu
No music track
Recording Format: DVD Video
Create to disk (check)
Normalize audio (have done it checked and unchecked and still have the error.