CorelDRAW X3 :: Microsoft Visual Basic Errors Occurred During Load
Feb 24, 2012
I've just installed Corel Draw X3 and I'm trying to run a plug-in to control my plotter. The plug-in is not in corel draw where it should be. I think the plug-in is supposed to run through visual basic. If I mouse down to visual basic in corel draw I get an error message that says "Microsoft Visual Basic errors occurred during load. So I'm thinking the problem is with the visual basic program, but it was installed in the corel draw disc. I'm running Windows 7 if that makes any difference.
View 9 Replies
ADVERTISEMENT
Feb 14, 2013
Is there anyway to shut off the notification window for errors occured during update? I am swapping parts in an assembly so I know constraints will have to be repaired, but it doesn't work that I have to click on the 'accept' button everytime I move an object
View 1 Replies
View Related
Sep 15, 2011
When I try to email an image from the trial version of PSP X4 I get the following error message:
"One or more unspecified errors occurred. No message sent."
The message comes up after the initial preparation of the image is completed and the program goes to link with the email (standard MS Mail in Vista).
View 13 Replies
View Related
Oct 31, 2011
I went into an assembly to change some parts and sub-assemblies and now everytime I move a part or constrain something I get this message "Errors Occurred During Update". Why is this happening?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 6 Replies
View Related
Nov 27, 2012
Is it possible yet to do this? I'd like to pick several points on the screen and get the color from each spot separately.Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
View 2 Replies
View Related
Jul 11, 2012
While trying to load a photo from catalog in Lightroom 4 Develop Module, load fails and I get message "an unknown error occurred." What does this really mean, what is the fix? Using PC and Vista.
View 2 Replies
View Related
Oct 17, 2013
Since upgrading to LR 5.2, I can no longer upload photos to Facebook. I get this message: "An error occurred while attempting to load this plug-in’s portion of the Export dialog. attempt to index upvalue '?' (a nil value)"
How do I get LR 5.2 to work again with my Facebook account?
View 5 Replies
View Related
May 9, 2012
When I start up the 64bit version of Photoshop CS6 I get the R6034 error. After about 20 times to delete the error message 64bit CS5 starts. This does not happen with the 32 bit version. How do I fix this?
View 13 Replies
View Related
Oct 20, 2003
I randomly get a Microsoft Visual C++ Runtime Library error when working in Inventor. It points to Inventor.exe and says "This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information." I have a Quadro video card, Win XP, plenty of RAM, no other programs running in the background.
View 5 Replies
View Related
Aug 19, 2012
Is there something I have to do to load basic window and door families?
Or do I have to get individual families like Pella to get any windows?
View 2 Replies
View Related
May 20, 2011
I need to know the visual basic 6 code to allow me to send Keystrokes to AutoCAD using Visual Basic 6.
Using the onscreen keyboard works ok.
View 1 Replies
View Related
Oct 1, 2013
can more easy convert lisp to visual basic code?
View 1 Replies
View Related
Jun 9, 2004
how to check snap errors in drawing in a specified layer against some other layer. means first layer should end with second layer otherwise place error.both layers have linear features.
View 7 Replies
View Related
Jan 2, 2013
I am trying to change the title block of the active sheet using visual basic. I realize this can be done using a snippet in iLogic, but I am creating an external .dll file using Visual Studio.
I have tried...
ThisDoc.Document.ActiveSheet.TitleBlock.Definition = "Title Block Name"
ThisDoc.Document.ActiveSheet.TitleBlock.Definition.Name = "Title Block Name" (This changes the name of the title block in the browser but doesnt swap it out.)
Call ThisDoc.Document.ActiveSheet.TitleBlock.Definition("Title Block Name")
View 2 Replies
View Related
May 20, 2013
I need a function that accepts a block name as an argument and will insert the named block without fail no matter if the block was made to scale uniformly or not.
How can I determine if the block should be inserted like:
(command "-INSERT" blkn "0,0" 1 0)
or:
(command "-INSERT" blkn "0,0" 1 1 0)
View 8 Replies
View Related
Jan 15, 2013
How do you divide a segment equally with a range in visual basic?
example-
length is 144 in
range- 7.5 - 9in
answer- (18) at (range 8 in)
like to know how to do this in Visual Basic so I can create some rules and forms in iLogic
View 3 Replies
View Related
Jan 25, 2012
We have a Visual Basic Script that creates pie charts using Adobe Illustrator along with an internally created app called Chart Generator. An xml file that contains a markup for a set of pie charts is imported into Chart generator and by using Illustrator it generates all of the pie charts and saves them as individual eps files.
It was recently discovered that not all of the pie slices are proportioning correctly. In some cases a slice that is 10% of the pie appears larger than a slice that is 13% of the pie. We can’t determine a pattern that might be causing this issue. We think that the problem is in the Visual Basic coding.
View 3 Replies
View Related
Jul 19, 2013
I can run the ACC fine on multiple DWG files with a basic set of commands in the script file. But, when I try to load an AutoLISP/Visual LISP file and run it from inside the script file, it doesn't work. How to run a LISP file using the ACC?
View 1 Replies
View Related
Mar 7, 2012
I created a 2,048 pixel x 2,048 pixel Corel Draw pic consisting of only two objects for purposes of testing to get a few parts of a work flow down. When I try to export to a format my 3d apps can use (bmp, tiff, etc) Corel changes the size, apparently to a size that fits my two objects snugly. But I don't want the size changed.
I want the size of the export to be the same size I entered when the file was created, 2,048 x 2,048.
View 9 Replies
View Related
Jul 29, 2011
Corel's strategy worked: I've given up the dumbhead's reliance on X4's color-management-off technique and am learning color management.
I have X5 running on an LED monitor with pretty good colors, outputting to an old Epson Photo Stylus 2200 inkjet printer. All I really need (right now) is to print out renderings of signs for customers' approval. I've made up a simple grid of Cyan-Magenta-Yellow (first row) and Red-Green-Blue (second row) using pure values from the color mixer:
Colors look decent enough on the RGB monitor, and the top row prints fine (printer is CMYK, after all). Red and Green on the second row are a little pale, but acceptable. It's the Blue that's the problem: I've divided the box to show the screen blue (upper left) and print blue (lower right); the latter is dark purple. Is this a gamut problem? Hard to believe the printer can't get any closer than that.
View 12 Replies
View Related
Jan 3, 2013
I'm getting these errors when exporting a simple file as an EPS.
View 5 Replies
View Related
Jul 13, 2011
Just moving from Draw 12 to X5 - nice improvements.I've had this problem in 12 and also in X5. Could be a print driver issue.
Simply, when I try to print text with an outline the entire page gets filled with the outline color. Outline on objects print fine.I'm printing on my Xerox DC242 with the pcl driver.
View 9 Replies
View Related
Jul 1, 2012
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
View 2 Replies
View Related
Apr 3, 2012
I can't see how to set my basic default settings that I have always used for:- artistc text: color, size, etc.- paragraph text: line spacing, etc.- graphic: color, outline, etc.
I even click "text properties" and nothing happens.
How is it done in X6?
View 3 Replies
View Related
Aug 28, 2012
Still on the basics, here's a demo video that includes adding a macro form and sizing of some selected shapes. I had fun doing this one but it's hard trying to squeeze everything into a short video (to keep video file size low).
View 5 Replies
View Related
Oct 11, 2011
I meet problem with autocad OEM, I don't know how to load arx in autocad OEM, I'm using visual stuido 2008 sp1 for building example arx and then i will load it in autocad OEM. I use command "arx" to load it, but it not work.I have a list arx files, i want it auto load list arx files when i start autocad OEM.I can't the way for it. i'm using AutoCAD OEM 2011.
View 5 Replies
View Related
Mar 8, 2012
i had my enterprise CUI working fine, and then one day it blew up and now everyone gets an error that autocad is trying to load acetmain.cui but it's already loaded. do i need to load acetmain.cui as a partial cui? i figured that i did, but then why does acad try to load it twice?
so i have the enterprise cui loading the acetmain as a partial. when the users log in, the enterprise cui is in loaded AS their enterprise cui in the Support Paths but then they load their own custom cui as the Main cui on their individual workstations. THIS cui ALSO is loading the acetmain. i think that's where the conflict is.
if that's the case, should i just give out instructions on how to remove the acetmain from their personal "custom" cui? it seems that if i take acetmain out of the enterprise cui, that the entire menu disappears from teh individual workstations.
View 1 Replies
View Related
Jun 20, 2011
A lot of the LISP routines we use turn off all snaps except the "nearest" snap when the routine is complete.
I draw with 6 out of the 10 snaps on (not the nearest).
LISP routine that loads specific object snaps?
View 9 Replies
View Related
Mar 13, 2012
I open the drawing without loading the function, when I modify an object with the reactors appears the following error message:
function definition: NAMEFUNCTION
You can avoid this annoying message without removing the persistent reactors?
View 3 Replies
View Related
Aug 23, 2011
We have stored lisp in fileserver which 30 users can access it. Now a day some users have getting the ‘failed to open project’ error after load the Lisp due to this they r also not getting most of the commands. The full rights have been given to appropriate folder which contains (Autolisp application source file, .vlx, Autocad VBA source). It has working for limited users (8-10 users).
Server OS: Windows server 2008
Note: Previously we had used windows server 2003.
View 1 Replies
View Related
Feb 29, 2012
How to save my workspace and load onto another machine? Both systems are running AutoCad 2011 and may soon change to 2012.
I figured out how to customize the ribbon and panels, and I even customized my shortcut menus. I then created my Workspace and "Saved As". Now how do I get this workspace loaded onto my Laptop with a seperate AutoCad License?
View 3 Replies
View Related
