Paint Shop Pro :: Change Color Of Paint Brush In X3?
May 15, 2012
I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
View 3 Replies
ADVERTISEMENT
Jul 17, 2012
PSPX4's change to target tool has never worked right for me. I have X2 which does work right. In PSPX4 no matter what the setting it applies way too much color. Even at 1% opacity it is like about 80% in PSPX2 with all settings the same.
Latest updates installed. PSPX4 still does not like Adobe LR4 JPEGs when resaving them, although I now get an error message instead of a save that loses the file for good as some 4-8k sized file that can't be opened. I still have to use X2 for those two reasons.
View 3 Replies
View Related
May 17, 2012
the image is attached.I would like to make the pin "blue", without loosing "real" appearance.
View 6 Replies
View Related
Apr 9, 2011
My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies
View Related
Jul 29, 2011
Question #1.
Were can I change the "color saturation" to use for my "color changer"?
Question #2.
When using "point-to-point" or "edge seeker", is there a way to go back one or two steps, without having to start all over again?
View 11 Replies
View Related
Feb 4, 2014
I'm using Paint.net since few years, and now I'm trying to coloring a brush with a precise color. I would like the brush to be in a blue color 3914AF (for example). I tried to use different fusion mode like "screen" on a third layer that I colored with this color...but it also let the color out of the brush itself. I thought of using the magic wandle before but to have a correct result...
HOW to change the color of any PNG brush directly in the picture in Paint.net.
Attached Thumbnails
View 5 Replies
View Related
Feb 1, 2012
I'm testing the trial of X4, and it opens in an unpleasant window which has a dark gray background - is it possible to change the color of this background?
View 13 Replies
View Related
Aug 10, 2012
How, after changing a photo to B&W, to color back in a section to the original colors, but can I change those colors to a different color? Like if I wanted to change a hat from red to green.
View 3 Replies
View Related
Sep 10, 2011
I am getting strange banding when applying the X4 warp brush to a tiff file out of lightroom. Never seen anything like this in X2, X3 or adobe 16 bit brushes. pic below (win 7 pro, i7 950, X58 MB, GTX460)
View 2 Replies
View Related
Jul 26, 2011
I was reading a tutorial on Photoshop about using a gradient map on a brush (the case in point was of drawing fire, with four colours, black, red yallow and white, making up the gradient map) such that you'd paint just once to get all four colours from each brush stroke. Here is an example. I was wondering how to do that in PSP X3 Ultimate. I am not new to PSP but I never used the more complicated brush features. Scripting doesn't scare me too much, if it comes to that, but I'd prefer a manual approach.
View 2 Replies
View Related
Sep 19, 2013
Can I use a brush to apply gautasian blur? I have paint shop pro x6.
View 6 Replies
View Related
Jun 1, 2011
PSPRo X.I have lost the ability to increase the size of the clone brush either by the presets or by the mouse and keyboard.It will not show by more than about one eighth of an inch square .
View 2 Replies
View Related
Dec 28, 2013
I was using the warp brush tool (Paint Shop Pro X4) and for a stupid manipulation the tool bar where I had the value related with the brush tool slipped away. Now I 'm not able to recover it and I cannot change the dimension of the brush of the warp brush tool. I don't know what to do and I'm in trouble. I have tried all the tool bars but it doesn't appear anymore. How can I change the dimension of the warp brush tool without that?
View 2 Replies
View Related
Sep 22, 2012
Check the following
PSPx5.
Tools.
Smudge Brush.
Size 40. Doesn't matter what size.
Hardness 100. Doesn't matter hardness setting.
Step 1.
Density and Thickness 100.
Rotation 0.
Opacity.
Here's my problem. If I set it to 71 or below nothing happens. If I set it to 72 or higher I get a big smudge. I can't get an opaque smudge. 72 I get nothing and at 73 I get a lot of smudge. I can go with a higher setting ok but I can't get anything below 72.I can play with density but that' gives a different result. Not what I want.
View 5 Replies
View Related
Dec 9, 2013
When using the oil brush, the color selector circle in the mixer palette is huge. Is there a way to make the selector circle smaller when using the oil brush The dropper at the center of the circle didn't show up in the screen grab.
View 4 Replies
View Related
Nov 10, 2013
How do I make a custom brush shape follow the contour of a path made with the Pen tool?
View 2 Replies
View Related
Nov 21, 2011
I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
View 6 Replies
View Related
Oct 18, 2012
For family history purposes, wish to improve the legibility of some hand written 1930 telegrams; the ink has faded with time so I want to change its colour to black. The form printing has not faded.
The user guide draws attention to the fact that the color selected for replacement must be in the image. Using the Dropper tool with sample size 1 pixel I position the dropper where I want it, see the color in the preview window, then right-click and the selected color appears in the background window on the Materials panel. So far, so good. I then place the Dropper tool over black in the swatch on the Materials panel, click and black appears in the Foreground window of the Materials panel. I think I'm set.
When I select the Color Replacer tool the background window immediately reverts to another color, usually white.Incidentally, the user guide suggests you read up on selecting colors with the Dropper; when you do this you learn that its OK to pick colors from the Materials panel.
View 6 Replies
View Related
Jan 30, 2012
Using PSPP X3 Ultimate.
I have some Tif files and jpeg files that are 600dpi and 400dpi. I scanned these images with my Canon CanoScan LiDE 700F scanner. Can i use my version of PSPP X3 Ultimate to change the dpi value? Is this stuck? I wanted to be able to get the 600 and 400 dpi image files (I have some 300dpi's too) down to the 100-250 range if I needed to. I see there are different export options and compression in PSPPX3Ultimate, but I'm not sure if this will do what I want.
I want to export as Tif and Jpeg again.
Are there any good third party photo and or video editors that I can batch edit this with? It's ok to mention pay programs and I'd prefer good quality freeware if there is such a thing. I am sure that my Corel program can do the trick though. I just don't know how and don't want to rescan multiple dpi's every single time. I only need the archives and then get the smaller dpi when needed.
View 2 Replies
View Related
Feb 16, 2013
When I installed PaintShop Pro X5, I listed the associated files (all of them). Now, when I go to the associated files, I cannot change the list (one or the total list). I check the boxes, but nothing changes. so I can change these associated files.
View 3 Replies
View Related
Aug 19, 2012
I have PSP X4 SP2.
Current color working space: AdobeRGB1998.icc.
I want to take HDR photo. I have 3 pictures JPG in AdobeRGB1998. When I giving HDR/MERGE EXPOSURE program automatically changing color profile of my pictures from AdobeRGB for sRGB. Why does it happen?
View 2 Replies
View Related
Jan 25, 2012
Just updated from X3 to X4. Spent an hour looking for the workspace color so I could get rid of the huge graphite box. Updated to SP1, found this forum, saw how to change the color in the files menu, and was very disappointed that the menu backgrounds changed, but not the BIG GRAPHITE BOX IN THE MIDDLE OF THE SCREEN!!
X3 gave us control of the colors. X4 is a big disappointment.what about the big graphite elephant in the room, the workspace?
View 2 Replies
View Related
Sep 15, 2011
When I try to print, the print placement dialogue box shows the image in greyscale, and when I click the options tab, the options to print color and CMYK separations are greyed out. Going ahead to print gives me a B&W print. The same file prints perfectly in color in PSP X3. What setting I need to tweak?
View 2 Replies
View Related
Dec 24, 2013
I understand many of the aspects of color management: gamut, color space, profiles, calibration, and most of the accompanying pieces. The problem is that I don't understand the inter-relationships of the various steps between taking a photo and printing it.
My equipment is not wonderful. If I were serious, I would have spent 10x what I did; but I'm not a pro. I'll settle for the best I can squeeze out of it. My goal, at this point, is to get my prints to look like what's on the screen.
For software I am using PSP X6 and Windows 8.1.
The photos I get come from various sources. As I understand it, those images (primarily JPEG if they come from a camera, presumably RAW if I scan directly into PSP) should have the profile of the capturing device embedded in them. Is that correct?
In the past I've been told that I should always use the color management in my editing application, rather than whatever Windows makes available. Is that still true? So far as I can tell, there is no way to turn off Windows Color Management (WCS).
You can turn off color management in PSP. There is a checkbox for it.I've been reading that I should set my PSP color working space to sRGB. Is that turned on and off by the color management checkbox? Assuming I have a profile for my capture device (camera or scanner), should I use that profile instead?
I have factory supplied profiles for both my monitor and my printer. Supposedly the printer will automatically select one of its various profiles based upon the paper I use, but that's a setting in WCS. (I can force a particular profile if I want.) In PSP's color management, I have to pick the profile manually.
Should I turn off color management in PSP, and set everything up in WCS? WCS has a setting for viewing conditions. The default is "WCS profile for sRGB viewing conditions", the alternative is "WCS profile for ICC viewing conditions". Does that mean that I could (or should) get an ICC profile based upon my work area's lighting, etc.
View 10 Replies
View Related
Sep 12, 2011
how to change the perspective of wording on PSPX2
I can easily do it on an image, as it comes up in the tool options toolbar, but the wording toolbar is the alignment one.
View 3 Replies
View Related
Aug 31, 2011
PSP X3 Not Responding, I had to terminate PSP ... I accidentally picked the Picture Tube tool, and then picked the adjacent Fill tool that I really wanted to use. The problem was that PSP was updating the Picture Tube cache, and was still in process at 98% and then hung! Not responding, killing the photo loader process not enough, so lost my current image edits. Not so good!
View 2 Replies
View Related
Jan 25, 2013
I'm a new user and wanted to change the units in the "File > Print" window to imperial from metric. Changing in "Preferences" doesn't change them and neither do the printer units. So far I haven't been able to find any references.
Note: I'm referring to the default unit (mm) that comes up in "Size and Position"
View 3 Replies
View Related
Dec 12, 2012
I just realized that the default is set to 20, which is too aggressive.
However, I don't see the way to change it in preferences.
Do I need to change the compression factor with every single save ? Or is there a way to set it in program defaults ?
View 4 Replies
View Related
Jun 19, 2011
I bought my PaintShop Photo Pro X3 on June 13, 2011, but when I installed it, the language in my program is Spanish, I want my program in English. How I can change de language in it?
View 3 Replies
View Related
Mar 3, 2014
my paint brush is set to black but when i paint with it, it paints gray. i was messing around with the colors and dont know what i did. how do i get the color back to black? elements 11
View 17 Replies
View Related
Sep 9, 2011
In the X3 version there was a menue setting for the color of the work space where you could change it and not have to use the Graphite color. In the X4 version there is nowhere to select non default color. There should be as not everyone wants to be forced into having it the default"graphite or whatever"color.
View 10 Replies
View Related
