I just realized that the default is set to 20, which is too aggressive.
However, I don't see the way to change it in preferences.
Do I need to change the compression factor with every single save ? Or is there a way to set it in program defaults ?
I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
A client sent me four images taken with his Canon camera - they are in Canon Raw (.CR2) file format. I can't get them to open and then save them as a .jpg or a .pspimage format in either PSP9 or in X3. In X3, when I click on the pic, it brings up the "Canon RAW Lab" dialogue box, showing a black and white image but with a deep pinkish cast to it. And there is no options to save it. What do I do from here?
View 7 Replies View RelatedI select "save as" pick a place, and the program appears to save the file, with the progress bar at the bottom - but it doesn't! It doesn't save a file, not always. If i then select save as again, it save the file.
View 8 Replies View RelatedI haven't really used PSP for doing custom graphics, mostly for working on photos; but before that I was using Adobe Photoshop and I liked (and still do) how it made saving easier than PSP does. Unfortunately Photoshop is horribly expensive so this is a better option.
I can't figure out for the life of me how to save .psd or .eps with the layers? It keeps telling me that due to how I am saving or the file format the alpha layers will be lost and so on.
When I open an image from my NAS, edit the image, and then attempt to save it as the default jpg type I get the following error message: "The filename, directory name, or volume label syntax is incorrect."
This error doesnt happen with any other image filetype. It doesnt happen with local hard drives. It doesnt happen with unedited images. It just appears to happen with edited images, the default jpg filetype, and my NAS.
When I actually type in ".jpg" at the end of the filename it works.
Its an annoyance i would like solved because I do this a lot.
Windows 7 Professional
Corel Paint Shop Pro X4
When I Save a workspace, I untick Include Open Images. I have always done this. When I save a workspace in X5, the 'Include Open Images' is always ticked. I un-tick it and save the workspace. X5 then asks me if I want to save changes to the open images in the workspace. Why? I click on No, repeated for all the images that are open at this time.
I then click on Save a Workspace again and yes, the Include Open Images is ticked again. In previous versions of PSP this remained unticked until the user ticked it again.
Paint shop pro 4. Patches up to date. I am unable to save files my files as .jpgs. I can save them as .psp files however. I was able to save them last week, so something has changed in my settings, but where to look. 10 years using PSP and I have to say...dislike all versions after PSP XI.
View 2 Replies View RelatedI use PSP x3 and I have a 3mb photo. When I edit and crop the photo, I then "save as". When I go back and ck the photo properties of the photo I saved after editing it has saved it at only 131kb. When I tried to get a large print developed, I was told the resolution was too low and the picture was pixelated. How do I save the edited photo and keep it at 3mb?
View 5 Replies View RelatedIt's been a few days now that when I try to save a picture (either with "save", "Save as", or "save copy"), I get the following message popping up:
"because of the limitations of the specified file format (and possibly the save options you've selected), the saved file will be limited to a merged image. Would you like to continue?"
I have hit ok to that and the software would save the picture, but when I checked the size of each picture I noticed a dramatic drop in size (from 6.5MB to roughly 1.3MB). Just for the record, the editing I did to these pictures was minimal, just a little rotation and a removal of maybe 2mm from each size.
First of all, is it normal to get this message?
And then, is such a drop in size normal?
it's pictures in JPEG taken from the camera and saved as JPEG.
How do you save an image to PDF format?
View 2 Replies View RelatedI have an image, whose outline is well defined, which I am preparing for laser cutting/engraving. I am trying to find a quick and easy way of creating a cutting path around the edges of the image. Tracing in Corel Draw is not good enough. PhotoPaint will convert the mask to a path but it is not well defined. I can easily create an accurate mask with Paint Shop Pro, and even fill it with black colour, but that is as far as I can get. I have tried pasting as a new image but there is an undeleteable and unmoveable layer created which stops the image being visible. Instead of crisp black image I just get a blank white square.
View 4 Replies View Relatedsimply put, can I save my history into a script, or just create the script from start?
View 4 Replies View RelatedI don't understand two things about the workspace tabs:
First, if I right click on a file in a file list like Windows Explorer and select "Open in PSPX4", the file opens in the X4 Edit workspace but disappears if I then click on the Adjust tab. Click back on the Edit tab and it is still gone. But if I click on a file in the X4 Organizer the image appears in all three workspaces, Manage, Adjust, and Edit. In X3 I could toggle back and forth between Express Lab and Full editor and the image would appear in both, no matter if it was opened through Explorer or from Organizer. Apparently X4 only want users to open files from its own organizer?
Second, I don't understand why after making edits to an image in one workspace, like Adjust, I cannot then switch to the Edit tab and make further edits without having to first save the changes made in Adjust. If I happen to go back and forth a few times making edits in two work spaces and am forced to save the file each time, don't these multiple file saves degrade JPEG files due to compounded compression? If so I would rather save only once at the end of all edits. Or am I not understanding the meaning of "save" in this context (a likely possibility). And part B, after making an edit and clicking on a different tab, why am I prompted to save when I have Auto save enabled?
PSP taking eons to save a file. It goes into (Not Responding) mode. It is using about 10 to 15% CPU for a good 4 to 6 minutes before it all comes alive again likje nothing happened. THis is with small 50K pics and larger 600dpi images. All held locally. No disk whirring so it all seems to be a memory thing ! Vista Ultimate. Old machine but PSP has been running fine on this box for a while now (aside from startup times being slow). I've been editing larger files regularly with no issues before.
View 4 Replies View RelatedIn earlier versions I was given the option of enabling the Auto Save feature, and choosing the time intervals between saves. I chose every 2 minutes. If it crashed or was shut down in a reboot, the images on which I was working were recovered with their layers intact. Nothing was lost. I do not have that option in Version X4.
Nothing is ever saved with Version X4
When I try to save a small jpg file I get the following:
"Because of the limitations of the specified file (and possibly the save options you've selected) the saved file will be limited to a merged image. Would you like to continue?"
I am running into an issue trying to complete processing of some images. I have converted a Canon CR2 raw file to TIFF, then opened into PSP X4. Now I wish to save as a JPG file. I've flattened & converted to 8-bit RGB. When I go to save it pops up an error stating: "An error has occurred while trying to write to the file". I can save the TIFFs, I can save to PNG, PSP, BMP, and presumably everything else. All except JPG--which is of course what is required. I can create an image from scratch and save to JPG. I've tried simply copying the image and pasting to a new image, then saving with the same error. Same with opening the PSP image back up & trying to save as JPG. I am updated to the latest patch just released.
View 5 Replies View RelatedI have a .psp image file that the information shows the resolution as 300dpi. When I try to save it as a .png file, the resolution changes to 118dpi. It doesn't matter if I just do a Save As or File > Save for Office > Professional Printing with 300dpi, the outcome is the same.
View 14 Replies View RelatedIt seems I can either save work at a lower quality jpeg, or export to get higher quality and lose the EXIF. I never want to use the lower quality, never, but I cannot seem to find anything in the Preferences to avoid having to manually set the quality. Is there a way to save at a higher quality than currently provided by PSP X4 by default?
View 2 Replies View RelatedHow do I get X4 to open with the same folder tree view I closed with? Like the first picture below. It always opens like the second photo, forcing me to drill down on the folder where I store most of my photos.
I already have "keep last view" checked in preferences. This was discussed in the link below for X3, but doesn't work with X4. [URL] .....
I am using Paintshop Pro X2. I've created a script that goes something like this.
1. Save original size as jpg in folder 1.
2. Resize 50%
3. Save as jpg in folder 2.
4. Resize 100x77
5. Save as jpg in folder 3.
6. Close file.
Everything works great except for one thing. During the save as operations the script remembers the original file names from when I record the script. Is it possible to replace that old static file name in the script with the file name of the current image?
PSP X4: I capture my images and do all processing in Adobe RGB. Now I want to save a low-res version as a JPEG file in sRGB color space. The save dialog tells me it will embed Adobe, but I want to save it as sRGB.
How do I change the color space before or while I save the JPEG?
I get the idea to save my processed RAW files in jp2 jpeg 2000 16 bit format(channel) so they need less space as RAW or tiff and can be later good modify without noticable quality loss. But i get the requester, that the format support only 24 bit ( 8 bit/channel)
jpeg 2000 is here since 10 years. Is it not possible that windows or other programs can read 16 bit /channel files, or whats the reason wy it is not possible in PSP X4 upd 1 to store such files ?
Does other programs too not support 16 bit /channel jpg ?
Auto save, in my opinion, is a pain, so I have removed the tick from the box and hope never to see it again.
Are these temporary files? Or are they saved to an unknown location to build up into a every increasing file. I have inspected the X5 folders and files, but can't locate where these files end up.
I've just instaled PSPP x3 on a new computer (i5-2500k / 8GB / Intel mainboard / ATi HD5450 with 512MB / Win 7 Pro - 64-bit), followed by the 4 patches.
When I start PSPP everything appears OK. I dragged an image into the program and worked on it.
When I came to save it (using the floppy disk icon or File / Save) PSPP immediately went into the 'Not Responding' state. When I restarted it, the same thing happens, but also with file open icon and File / Open as well. Editing functionality seems unimpaired.
I followed the 'complete uninstall' process; CDS 2010 Clean-Up ver1.8.exe, folder cleanup and registry cleanup. I turned off User Account Control, rebooted, disabled my anti-virus, and then reinstalled. Exactly the same as before.
I want open a PSD-File (CMYK) and save it as PNG (RGB). The Problem is, that the colors are completely wrong (orange is brown and so on). I tried something with Colour Management and -Workspace but nothing solves the problem.
If i take a look with XN View the Colours looks good. Same problems with JPG in CMYK (MS Paint shows correct colors, PaintShop wrong).
Example.png
Example
(237.38 KiB) Downloaded 462 times
How do I save an image with a transparent background. I check of transparent background when loading up an new image. I set my image dimensions make color transparent and go. When I save the file in jpg it previews with a white background. I need to use my logo on different color media each time the logo sits in a white box.
View 1 Replies View RelatedI'm using PSP Pro Ver.5 under Windows 7 on a 64 bit machine. When I attempt to perform a "Save As' operation using the pspimage option, some of the pspimages appear as thumbnails - but other pspimages appear only as icons. How do I get them all to appear as thumbnails?
View 1 Replies View RelatedUsing PSPP X3 Ultimate.
I have some Tif files and jpeg files that are 600dpi and 400dpi. I scanned these images with my Canon CanoScan LiDE 700F scanner. Can i use my version of PSPP X3 Ultimate to change the dpi value? Is this stuck? I wanted to be able to get the 600 and 400 dpi image files (I have some 300dpi's too) down to the 100-250 range if I needed to. I see there are different export options and compression in PSPPX3Ultimate, but I'm not sure if this will do what I want.
I want to export as Tif and Jpeg again.
Are there any good third party photo and or video editors that I can batch edit this with? It's ok to mention pay programs and I'd prefer good quality freeware if there is such a thing. I am sure that my Corel program can do the trick though. I just don't know how and don't want to rescan multiple dpi's every single time. I only need the archives and then get the smaller dpi when needed.
Any way in X5 to save or copy the modifications/effects from one photo to another? I took photos of some old building drawings and used clarify, noise removal, contrast, etc. I wanted to apply the exact same modifications to all of the other photos of the drawings. Is there a simple way to do this? Can I save it as a preset or filter or something similar. It would sure save a lot of time.
View 2 Replies View Related