How do I save an image with a transparent background. I check of transparent background when loading up an new image. I set my image dimensions make color transparent and go. When I save the file in jpg it previews with a white background. I need to use my logo on different color media each time the logo sits in a white box.
View 1 RepliesI have a jpg 350 x 250 with a white background and a photo of a girls face within a round circle in the center.
I Tried to create a transparent background it did not work for me, so I used the background eraser tool (psp12)
So now I have a circular image with a transparent background.
I have another Image of the same size and I want to place this round image 350 x 250 with transparent background on top of the second image 350 x 250. How can I do this ?
I want to lift image from photo and then do transparent background.
Is there any knack of selecting the item from the image cleanly. In my case its a dog. I use the lasso to go around the object but that leaves a 2mm space where the background shows through.
(Is there a way to use the lasso to make a partial selection then remove your finger from the mouse and then continue your selection from where you left off ?)
After I have Deleted the inverted selection I use the Background remover to remove the remaining 2mm of background around the dog.Again is there a knack to using this tool ? I Googled and it said to keep the removal circule half in and half out of the actual image. Also is ther a correct setting in the menu bar for the BG/removal tool..Im just experimenting.
my settings at this moment are.
size 18
Hardness 100
Step 10
Density 100
Thickness 100
Rotation 0
Opacity 100
Tolarance 75
Sharpness 100
Sampling: Continuous
Limits: Contiguous
Boxes not ticked. Auto tollerance and Use all Layers.
Box ticked: Ignore Lightness.
How can I change the color of the background in an image from white to transparent?
I am using PSP v7.04
I didn't realized that as I'm importing images, the 'background' was defaulting to white. I'm working a couple images right now, in which the transparent setting is really needed. I found where to change the default, but not how to change it for existing images in PS already.
View 2 Replies View RelatedPaint shop pro x3 Whoa am I out of date. But maybe there is still hope before I get X6. I am trying to make a background transparent so that when I insert it onto a presentations slide, the item, a Christmas tree, has no background other than what is the background of the slide. I used the background removal process, asked for 0 opacity on the background and still when I save, or paste, it is in a rectangular white box.
I'm missing something simple, I know it. But thats been my day.
How do I essentially make it a stand alone little thing with no background?
How to have a totally transparent background, using corel PSPX4?
I have a picture of a logo with a white background. I would like to get rid of the white background so I see nothing but the logo. Background eraser works but after I save, the bmp still has the white background.
how to save an IMPORTED picture that HAD a white background, with a CLEAR background?
View 7 Replies View RelatedWhen I draw an image or put text in and I make the background transparent and save. PS I save to my pictures.When I drag my image or text onto my clip in my programe sometimes it works and someimes the background goes black, why it goes black about 90% OF THE TIME
View 4 Replies View RelatedI am trying to save a tif file to gif and at the same time setting the white background transparent. I did this in Corel Photo Paint 11 with the following
Call PhotoPaint11App.CorelScript.FilterGIF(0, 0, 1, 1, 0, 0, 0, 0) Call PhotoPaint11App.CorelScript.FileSave(gWebFolderMain & gMVID & "-NakkeO.gif", PHOTOPAINT.cdrFilter.cdrGIF, 0)
Now in Corel Photo Paint X5 this doesn't work any more. What have changed and what am I doing wrong. According to documentation it seems to be correct.
I have 2 gif images. On image2 I have erased the background so as all you see is the checkerboerd.I want to place image2 (the visible part) on to image1.
I'm sure I have done all the correct procedures but the #2 image will show either a black or white background when pasted on to image 1.
These are the rules I followed. To make one image color transparent
1. Choose Image Palette Set Palette Transparency. If you are prompted to reduce the color depth and number of layers, click Yes to continue and then choose the options for decreasing color depth.
2. On the Set Palette Transparency dialog box, choose one of the following options:
• Set the transparency value to the current background color — makes the background color transparent
• Set the transparency value to a palette entry — specifies a color to be transparent. Click the color in the image, or click the color box to select from the current color picker. If you want to view the transparency, click Proof.
3. Click OK. The color is now transparent; however, it may still be displayed until you hide it.
I have saved a image (as a BMP file) with a transparent background. I want to use this image as my wallpaper. However when I show this image on my desktop (as the wallpaper), the background shows as white white color while I was hoping that I will only see the image and the background will be transparent .
View 3 Replies View RelatedI have saved a image (as a BMP file) with a transparent background. I want to use this image as my wallpaper. However when I show this image on my desktop (as the wallpaper), the background shows as white white color while I was hoping that I will only see the image and the background will be transparent
Chow to achieve the desired result.
I have saved a image (as a BMP file) with a transparent background. I want to use this image as my wallpaper. However when I show this image on my desktop (as the wallpaper), the background shows as white white color while I was hoping that I will only see the image and the background will be transparent
View 9 Replies View RelatedI am using PSP X4.
I am working with transparent images. An example is the image below. I've added borders so you can see what I'm doing.
As you can see, the background is solid white, but the image itself is primarily white. I want only the background to be transparent.
I've dabbled with the GIF Optimizer feature to make the background transparent, but part of the actual image becomes transparent also, since it contains white.
One thing I tried doing was use the color replacer to change the white background to another color, but in doing so, some of the image itself changes to yellow, despite my trying to avoid that.
Is it possible to configure PSP so that only the background is transparent? If so, what's the most practical method?
I just purchased Paint Shop Pro X4, and do have one question about making transparent images.
I’m designing a simple, basic text-only logo for my web site. I know how to make the image transparent. That’s not a problem, if I'm using a plain solid color as the background of the page.
What I would like to know is this: How do I make the text logo transparent if the page background of my web site is an image, such as a photograph, or textual wallpaper. I’ve never tried that, and am wondering if that will make the creation of a transparent GIF more difficult.
Is the procedure for making a transparent GIF different in this case? If so, what steps should I take?
Can I use a the color replacer tool in PSP 7 to replace a color in an image with a "transparent" color or is there some other way of doing this using the eraser for instance?
View 1 Replies View RelatedIs it very difficult to put a "ghostly" transparent figure over a fiery background picture?
Or could even I do it?
A 3rd party provided me a PNG file of a hand-drawn image with a white background.
What is the best way to convert this image so that all the white areas are really transparent?
I'm trying to make the background in an image transparent. After I save the image to my desktop, I check it out and it doesn't appear transparent. I open it in Paint.NET and sure enough, it's not. I know I know how to make things transparent because i've done it before but it just won't work this time.
View 5 Replies View RelatedTrying (in vain) to get the background of this picture transparent...Its white right now and i tried alphamask the whole picture looked like it had seen a ghost but it still wasn't transparent the magic wand refuses to do so either perhaps i'm doing something wrong?
View 3 Replies View Relatedwhen I copy it to a colored background, it then is white not transparent.
So what's the cure? Other than I shoot myself...
I used to be able to do this but have forgotten how. I would like to remove the bg from a small image, ie make it's bg transparent, and place that small image on top of a large image, a banner. Not sure what I am doing wrong but when I place the small image on the large one the entire image is transparent, not just the bg.
View 2 Replies View RelatedHow do I make a white background transparent? I tried using the fill option but that didn't work.
View 1 Replies View RelatedI am trying to save text as an image.
I've typed in the text in the color that I want. I've clicked on the magic wand, clicked on the white space and I get the checkered background. But it also covers my text and then when I try to use the saved image, it's all completely transparent.
How do I do this so that the text shows up, but the background remains transparent?
I need the logo of my team from a game I play so I can modify or create profile cards. I have the original card and I'm trying to copy and paste the logo so I can use it on another image with a different background or theme. But when I copy and paste the logo I want to use, I use the "select" option and it goes with the original background. Is there an option so I can make the background dissappear and just get my logo on a transparent background for future use or edition? In this case I'm trying to make a St.Patrick's theme for the fan page of my team.
View 10 Replies View RelatedI have a light-colored image that I want to make a transparent background of without having any of the jagged white edges and whatnot, to make a signature and avatar and so on. I've tried the magic wand, Alpha Mask, and Alpha Space, none of which have succeeded. As I said, the image itself is very light (the attached image), so it's difficult to achieve what I'm trying to do.
Attached Thumbnails
how to change 'solid color background" image to Transparent?
View 4 Replies View RelatedA client sent me four images taken with his Canon camera - they are in Canon Raw (.CR2) file format. I can't get them to open and then save them as a .jpg or a .pspimage format in either PSP9 or in X3. In X3, when I click on the pic, it brings up the "Canon RAW Lab" dialogue box, showing a black and white image but with a deep pinkish cast to it. And there is no options to save it. What do I do from here?
View 7 Replies View RelatedHow do you save an image to PDF format?
View 2 Replies View RelatedI have an image, whose outline is well defined, which I am preparing for laser cutting/engraving. I am trying to find a quick and easy way of creating a cutting path around the edges of the image. Tracing in Corel Draw is not good enough. PhotoPaint will convert the mask to a path but it is not well defined. I can easily create an accurate mask with Paint Shop Pro, and even fill it with black colour, but that is as far as I can get. I have tried pasting as a new image but there is an undeleteable and unmoveable layer created which stops the image being visible. Instead of crisp black image I just get a blank white square.
View 4 Replies View Related