PSP X4: I capture my images and do all processing in Adobe RGB. Now I want to save a low-res version as a JPEG file in sRGB color space. The save dialog tells me it will embed Adobe, but I want to save it as sRGB.
How do I change the color space before or while I save the JPEG?
I am running into an issue trying to complete processing of some images. I have converted a Canon CR2 raw file to TIFF, then opened into PSP X4. Now I wish to save as a JPG file. I've flattened & converted to 8-bit RGB. When I go to save it pops up an error stating: "An error has occurred while trying to write to the file". I can save the TIFFs, I can save to PNG, PSP, BMP, and presumably everything else. All except JPG--which is of course what is required. I can create an image from scratch and save to JPG. I've tried simply copying the image and pasting to a new image, then saving with the same error. Same with opening the PSP image back up & trying to save as JPG. I am updated to the latest patch just released.
View 5 Replies View RelatedIn vX1 I could save jpeg without substantially reducing file Mb size. In vX4, whenever I edit and save a jpeg file (using save & save as), it results in a reduced number of Mb's. Options in the 'save as' dialog are set at best. It would appear that PSP X4 is automatically optimising. Is there any way that the original file size can be retained on saving after editing?
View 7 Replies View RelatedI have resized my stock files to 640x433, 72dpi, JPEG, for cataloging to Extensis Portfolio 7 and CDRs. These images are in numbers folders, according to subjects. The problem is when I initially open an image it asks for the color profile. I want it Adobe 1998 RGB, the same as my master TIFF files.
How can I just do this process by the folder for all images within it.?
Do I have to, for example, open all 2000 files, assign the profile and then save individually?
Have a folder containing 100+ JPEG image files, another folder containing the same files as 16 bit TIFF with layers, and a third folder containing the TIFF files flatened. All are in the Adobe RGB color space. I want to convert these same files to sRGB to use in a slide show. What are the steps to batch process this change? Is it using an action? Should I start with the TIFF folder or use the JPEG folder?
View 1 Replies View RelatedWhen I open a jpeg in X4 it always says it is at 72 dpi. Even when I resize it so it is at 220, when I open it again and look under image information it always says 72 dpi. If I open the same image in any other editor, including X3 it reports the correct dpi. This coupled with the extreme compression is making X4 useless to me unfortunately.
I'm not prepared to sit and do the math to try and figure out what it is really at.
I have reset the number under preferences/general program preferences/units and it doesn't respond to that either.
For me, this version is problematic and not worth taking the time to learn. I need to be able to depend on and trust the information I'm getting from my software.
I am an artist doing digital paintings on Photoshop CS3. I drew an outline of my drawing in one shade of blue and realized the color profile was in sRGB.
I have now converted the psd document to color profile Adobe 1998.
When I start to put color in, underneath the blue outline layer -will the colors be of Adobe 1998 quality? (I plan to do gradients/blend colors and eventually print my work out. I have heard the colors can look choppy when done on sRGB mode) .
how can you work in adobe RGB and sRGB colours paces in LR 5. Why do my photos in prophoto colour space print so badly on my inkjet computer. If I am using the book module in LR 5 will Blurb be able to print them using prophoto colour spaces.
View 2 Replies View RelatedI shoot raw srgb with Canon t3. I make adjustments in Canon's Digital Photo Professional then batch convert to jpg.
under color settings in cs6 I've chosen srgb, however, when I open my jpg picstures CS6 opens them as adobe rgb 1998 instead. I then have to convert them back to srgb.
How can I get CS6 to stop doing this so my pictures remailn srgb. I've tried checking the 'embed profile" box in DPP but that doesn't seem to make any difference.
The PSP X4 that I have compresses jpegs to an extreme amount even when set on compression factor 1. (a 4000 kb jpeg gets compressed to 1900kb. The previous versions would not change the compression when you open a file and just save it without changes. This one cuts the file size in more than half.
I really like some of the new layout and features, however my clients won't accept a jpeg that is compressed that much. Any other setting I need to change to stop this?
The jpeg and png optimizer in X6 doesn't work correctly and keeps the .pspimage file extension in the 'Save Copy As' dialog box. I either have to delete the extension or overwrite with .jpg/png to save in the appropriate format.
View 1 Replies View RelatedI'm working with PSP XI version on Windows XP machine.
I have been successfully editing many jpegs without issue, reviewing in slide show "Quick review" and doing one step correction "Quick Fix" in some cases. But now in one batch of photos whilst editing one picture an error message occurred (did not note it down) once during slide show preview; application locked; and having restarted PC / application this one file cannot be edited. Error message does not recur, Organiser tray simply shows grey box for this file.
When selecting this image in Organiser tray whole application still locks. Working with other images is fine.
Windows Explorer says that this one jpeg file is corrupt and copying and renaming does not fix.
Other preview software cannot recognise the jpeg either.
Programme: X4
System: Windows 7 Ultimute 64bit
Installed 01/01/2012 with SP1.
Problem: When I save jpeg files some of them become corrupt and will not open.
I have been using PSP for a number of years and decided to upgrade to X4, now a number of the files that I save in PSP are becoming corrupted and they seem to all be photos which are shot using a pure white background, not all photos are affected, I never had this problem in my previous versions of PSP
I use adobe lightroom which I transfer my raw file into jpeg, this is where i then open the jpeg in X4 and do my main editing, it is when I save the image it saves corrupted and can not be opened or deleted (shows that X4 is still using the file) . it will also not allow me to re transfer the image from my catalog.
There are some good features and I am considering uninstalling and reverting back to my older program (X2).
This may be an issue with the metadata of the image, I exported 2 sets of 50 identical images 50 with and 50 without the Metadata and ran a script which then automatically save the image, about 20 of the images with the metadata ended up corrupted, all the images without the metadata saved fine.
I have a picture file(JPEG) with a text in Japanese that I want to copy from. I've tried the trick with Microsoft Office One note & word(for those of you who know it) but it didn't work. Is there anyway to do it in PSP?
View 3 Replies View RelatedPSPro X. After adding text to a jpeg image it becomes a vector object, what is the easiest way to save it as a jpeg file
View 7 Replies View RelatedMy daughter in law who is Vietnamese took some photo's and downloaded the Jpeg files onto my pen drive.
When I transferred these files to my hard in the UK, I found that the photo's would not open. Looking at the properties, it showed every Jpeg photo was in in "Read only format" and contained 0 bytes. The hole folder contained 544 M bytes of photo's. I then deleted the shaded out part of the "Read only" file and pressed OK, but this did not allow the file to be read.
I then tried to open the photo's in Paint Shop X4 and this was a success.
A few days later I tried to re access the Jpeg photo's and again, but I cannot open the Jpeg files with or without X4. (working with Widows Home Premium)
With LR4 and a Nikon D7000.When i import that raw in lightroom, the first view of the picture is fine then LR do its "loading" and bang, the picture changes.As RAW is not supposed to be affected by the colorspace My understanding is the embeded preview in the raw is sRGB and LR work in a different colorspace. If i change the camera for AdobeRGB, i dont have the problem and what i see from the camera to the preview then the final result is consistent.But this cause me another problem because i shoot RAW+jpeg, the backup JPEG saved in the other memory card is now AdobeRGB as well and less compatible as everybody knows, for web, print labatory, etc...
I dont have in LR any automatic developement settings.My screen is calibrated with a Spyder 3.
I'm feeling stuck in the corner as i want by backup JPEG in sRGB and n o colorshift in LR.
I'm getting some erratic results with PSPX4. I download my CR2 canon files to lightroom, process, export as Tiif or jpeg, then open in PSPX4. I then edit the pic resize to 800x600 jpeg, quality 3. The file is usually about 300-400 kb, a jpeg. I have a couple of files that are corrupted on resizing and are only 12.0 kb in size. I can't upload to my website, - the error message says they are corrupted. I'm not getting it with every file, but two in the last batch of ten files processed had this effect.
I tried restarting the program, same effect on those two files. I tried reprocessing in lightroom again , exporting as jpeg and tiff, same result. I can save the files out of PSPX4 as png format, no problem, no corruption.My workflow is the same across a large number of files, - hundreds of em, normally no problem. Just can't figure out what would cause this erratic problem.
I can open and save the problem files in gimp, which makes me think the problem is specific to PSPX4, but why does it not affect every file, only 20%??? Tried re installing PSPX4, no difference.Below is one of the problem jpegs file straight from Lightroom, before I load it into PSPX4.
I perfectly understand that paint save as png to avoid get information loss..BUT Why don't you let us configure an alternative save as to get jpeg ? Like another short cut : e.g "ctrl+shift+alt s" would let us save as jpeg without loosing each time 5sec to change png to jpeg. because when you have to save 10-20 print screen in a row that's more than painfull.
give us a option to set jpeg as default ! and if you are so afraid that ppl forget that will make them loose information just make a pop up to remind them why the png can be more interesting for other situation.
personally, i use paint.net to save in a sec print screen, to add somes informations it in need to post a screen on a forum etc.. and this soft is perfect for that since it load in a sec and its simple enough and fast.consider add a OPTION to allow us set jpeg as default save as.
I perfectly know that png is more interesting in somes case, and i dont want discut about why png > jpeg, i just would like to be able to do what i want and have a option to set the jpeg as default.
I normally save my images as jpegs. What I'd like to know is can paint.net bet set to save as jpeg by default, to avoid having to change from .png each time.
Also, is there a way of short-cutting to the acquire screen, rather than going file > acquire > from scanner or camera > Select device each time - I only have one scanner, so I use that each time.
Paint.net auto saves my files as PNG. This is VERY annoying because I am saving many, many files. Each time I save I have to switch it to JPEG. If it is PNG I cannot see the file on my PC (it will be invisible). Plus, more programs use JPEG than PNG. This auto choosing PNG is a big waist of my time/energy/effort. is there an option to change this?
View 5 Replies View RelatedWhenever I try to open jpeg files larger than 2MB PSP 4 crashes.
The files open fine in PSP 3
The plague has struck my X4. I have done absolutely nothing to the computer in over two years. I can't save a file as a JPEG to most folders using Save AS. It will save a file as a JPEG to the TEMP folder -- but the preview in which I can set compression does not show up. However, it still works well if I Export to Web.
View 10 Replies View RelatedIs it possible to set 'Save as type' to JPEG as default value?
View 2 Replies View RelatedI never save images in the .png format. I always use .jpg or .jpeg. Is there a way I can change the auto save from .png to .jpeg?
View 2 Replies View RelatedI'm running PSPX3. the effect of no compression (or compression factor = 1) on saving files. I've got a JPEG image file straight from my camera that's approximately 4.1MB in size. If I do nothing else but "Save As" with a compression factor of 1, the new file size is approximately 50% larger, or 6.2MB. What has changed to make the file size larger? Both images are still 72DPI, 3648X2736px. I can't image that I have done anything to "improve" image quality, so why did the file size increase?
View 14 Replies View RelatedI have imported a jpeg image by double clicking it and it is showing as a vector in the workspace.All the tools on the left are greyed out(eg clone brush) except for the text tool.On selecting the text tool instead of the usual box showing a blue bar appears on top of the screen which can be moved about.
View 2 Replies View RelatedA client sent me four images taken with his Canon camera - they are in Canon Raw (.CR2) file format. I can't get them to open and then save them as a .jpg or a .pspimage format in either PSP9 or in X3. In X3, when I click on the pic, it brings up the "Canon RAW Lab" dialogue box, showing a black and white image but with a deep pinkish cast to it. And there is no options to save it. What do I do from here?
View 7 Replies View RelatedI select "save as" pick a place, and the program appears to save the file, with the progress bar at the bottom - but it doesn't! It doesn't save a file, not always. If i then select save as again, it save the file.
View 8 Replies View RelatedI haven't really used PSP for doing custom graphics, mostly for working on photos; but before that I was using Adobe Photoshop and I liked (and still do) how it made saving easier than PSP does. Unfortunately Photoshop is horribly expensive so this is a better option.
I can't figure out for the life of me how to save .psd or .eps with the layers? It keeps telling me that due to how I am saving or the file format the alpha layers will be lost and so on.
When I open an image from my NAS, edit the image, and then attempt to save it as the default jpg type I get the following error message: "The filename, directory name, or volume label syntax is incorrect."
This error doesnt happen with any other image filetype. It doesnt happen with local hard drives. It doesnt happen with unedited images. It just appears to happen with edited images, the default jpg filetype, and my NAS.
When I actually type in ".jpg" at the end of the filename it works.
Its an annoyance i would like solved because I do this a lot.
Windows 7 Professional
Corel Paint Shop Pro X4
