Paint.net auto saves my files as PNG. This is VERY annoying because I am saving many, many files. Each time I save I have to switch it to JPEG. If it is PNG I cannot see the file on my PC (it will be invisible). Plus, more programs use JPEG than PNG. This auto choosing PNG is a big waist of my time/energy/effort. is there an option to change this?
View 5 RepliesI never save images in the .png format. I always use .jpg or .jpeg. Is there a way I can change the auto save from .png to .jpeg?
View 2 Replies View RelatedIn earlier versions I was given the option of enabling the Auto Save feature, and choosing the time intervals between saves. I chose every 2 minutes. If it crashed or was shut down in a reboot, the images on which I was working were recovered with their layers intact. Nothing was lost. I do not have that option in Version X4.
Nothing is ever saved with Version X4
Auto save, in my opinion, is a pain, so I have removed the tick from the box and hope never to see it again.
Are these temporary files? Or are they saved to an unknown location to build up into a every increasing file. I have inspected the X5 folders and files, but can't locate where these files end up.
I perfectly understand that paint save as png to avoid get information loss..BUT Why don't you let us configure an alternative save as to get jpeg ? Like another short cut : e.g "ctrl+shift+alt s" would let us save as jpeg without loosing each time 5sec to change png to jpeg. because when you have to save 10-20 print screen in a row that's more than painfull.
give us a option to set jpeg as default ! and if you are so afraid that ppl forget that will make them loose information just make a pop up to remind them why the png can be more interesting for other situation.
personally, i use paint.net to save in a sec print screen, to add somes informations it in need to post a screen on a forum etc.. and this soft is perfect for that since it load in a sec and its simple enough and fast.consider add a OPTION to allow us set jpeg as default save as.
I perfectly know that png is more interesting in somes case, and i dont want discut about why png > jpeg, i just would like to be able to do what i want and have a option to set the jpeg as default.
I normally save my images as jpegs. What I'd like to know is can paint.net bet set to save as jpeg by default, to avoid having to change from .png each time.
Also, is there a way of short-cutting to the acquire screen, rather than going file > acquire > from scanner or camera > Select device each time - I only have one scanner, so I use that each time.
Is there any way to recover lost data after Paint Shop Pro X4 crashes?
There should at least be an option to save all open documents every x minutes. Where is this option?
I found where PSP saves the temp files and I recovered several of them. Is it possible to use these files to recover my data?
The plague has struck my X4. I have done absolutely nothing to the computer in over two years. I can't save a file as a JPEG to most folders using Save AS. It will save a file as a JPEG to the TEMP folder -- but the preview in which I can set compression does not show up. However, it still works well if I Export to Web.
View 10 Replies View RelatedIs it possible to set 'Save as type' to JPEG as default value?
View 2 Replies View RelatedI am running into an issue trying to complete processing of some images. I have converted a Canon CR2 raw file to TIFF, then opened into PSP X4. Now I wish to save as a JPG file. I've flattened & converted to 8-bit RGB. When I go to save it pops up an error stating: "An error has occurred while trying to write to the file". I can save the TIFFs, I can save to PNG, PSP, BMP, and presumably everything else. All except JPG--which is of course what is required. I can create an image from scratch and save to JPG. I've tried simply copying the image and pasting to a new image, then saving with the same error. Same with opening the PSP image back up & trying to save as JPG. I am updated to the latest patch just released.
View 5 Replies View RelatedPSP X4: I capture my images and do all processing in Adobe RGB. Now I want to save a low-res version as a JPEG file in sRGB color space. The save dialog tells me it will embed Adobe, but I want to save it as sRGB.
How do I change the color space before or while I save the JPEG?
In vX1 I could save jpeg without substantially reducing file Mb size. In vX4, whenever I edit and save a jpeg file (using save & save as), it results in a reduced number of Mb's. Options in the 'save as' dialog are set at best. It would appear that PSP X4 is automatically optimising. Is there any way that the original file size can be retained on saving after editing?
View 7 Replies View RelatedI got this workflow,
1) From LR export to PS
2) Do all essential editings.
3) Save. File become 'xyz.tiff' now. (I want to keep this as master copy)
4) Crop to 4r, Save a Jpeg copy as 'xyz 4r.jpg'
5) PS save it as a copy, but do not automatically open the Jpeg copy. The tiff remains opened. I have to manullay Open, browse to it, and open the Jpeg. The 'Open Recent' list also do not list 'xyz 4r.jpg'.
6) Do 4r sharpening for the 'xyz 4r.jpg', save it.
Basically the files I want to keep and worked on is like this: NEF -> xyz.tiff -> xyz 4r.jpg -> xyz sml.jpg(maybe)
Now, it there a way in step (5) to have PS save the JPEG copy, and automatically open it? I don't care if the Tiff copy remains opened or not, I am done with it.
I got a new computer (Windows 7) at work this April and as of today, when I work on any of my JPEG images in PS CS5,suddenly it has defaulted its "Save As" to JPEG2000. How did this default change and how do I get it to default save as. JPEG again? There was nothing I noticed and no warning as to why this has changed, I didn't touch a thing!
(Last week, Adobe had to work with our IT manager to fix a problem that started occuring with my new Adobe Acrobat Pro 11 program. They had to log into my computer and change a registry thing to get it to work properly again...also something that changed without warning!!)
I recently had some problems with auto-save. I was working on a project when my computer stoped working and I had to force shutting down. However, my Premiere CC is set to auto-save every 15 minutes. When I went to see the auto-save files I didn't find my entire work. I had several sequences previously the one I was left with. What had happen?
View 1 Replies View RelatedWhy does AutoCAD still have automatic save if it is not going to automatically save your files? I have used AutoCAD for over 20 years and when the introduced automatic saves, I thought it was the coolest thing since sliced bread. But apparently some time between release 2010 and 2012 it was redone or it just don't work. I can recall closing a drawing w/o saving by mistake after having worked on it for 2-3 hours and only loosing at the most 10 minutes of my time. I just did the same thing and lost about 2 hours worth of time and my automatic save was set to every 10 minutes as I have set it since automatic save was introduced.
View 4 Replies View RelatedFrom the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies View RelatedI have a PSD file (16bits/prophoto RGB) with some layers. I combine the layers to ONE and change the bit depth to 8 bits.
Then I do one of two things:
(a) I save the file for the web in JPEG 90% high-quality and with sRGB ... filesize 340 602
(b) I change the color profile to sRGB and save the file as JPEG in the highest quality (10) ... filesize 174 549
I am at loss here. How on earth is it possible that the second file is almost half the size as the one saved for the web?What effect causes this? It is very easy to save for yhe web but as long as the JPEGs are that bigger it's no option.
when im about to save my file *project* nothings happen
View 2 Replies View RelatedI am working on many files today and for some reason, even though they are JPG files, when I save them, the dialog box comes up and wants to save it as a PSD. It's wasting a TON of time because I have to change it to JPG even though the file is already. I tried the open as-JPG option on any of them and it gives me the error message of -"Could not complete your request because the file-format module cannot parse the file". I'm in CS6 because there were too many issues with Photoshop CC.
View 12 Replies View RelatedI got a file that's only let me do Save for Web in jpg format. I choose png24, click save and it changes to jpg in the save dialog. Then I created a blank doc, copy everything from the problem file over to the new file and I can Save for Web in png just fine.
View 4 Replies View RelatedI am trying to lasso an object in a picture something like an autosave goes off causing the lasso to capture parts of the picture that are not wanted. I have tried to find an auto save but do not seem able to.
View 1 Replies View RelatedI'm having trouble using the paint brushes in photo paint x6. i open a JPEG or bitmap then use a paint brush to paint on the image but there is no paint. do i have to use a mask now? I tried copying a dupe for a second layer to see if that worked but nix. i still have x4 and i do it there. but what's with x6? all the other tools work but the paint brush.
View 14 Replies View RelatedI'm just trying to understand the reasoning behind the fact that seeminly every other product out there has an autosave and recovery feature..why am I paying so much for a product that will eventually crash and I lose all my work since my last save?
View 10 Replies View Relatedwhen using the autosave feature or having it enabled. When I work a lot of times I have a main file that I use as a template to create other pages from. So I will open template and update things on it and then save as and name that as a new file. My question is if I open this template file and make a few changes will it autosave those which will basically overwrite my template. I have the autosave feature turned off right now because I wasn't sure if it would do that.
View 7 Replies View RelatedI have an action that I created that reduces color saturation in JPEGS. I want to run this action with a batch, but every time I do, the batch pauses with the JPEG Options dialog (where you choose image quality).
Is there a way to automate that step of the process? Because I just want to save it on the highest quality setting for each picture.
I have over 1000 pictures to run this batch on, and I'm hoping there's a way to automate the JPEG options dialog box.
My auto save keeps shutting off.
I drawing in Model Space, Plot or Publish in paper space. Some times I Plot if just print one tab, but if printing multiple tabs I publish.
What could be causing Auto Save to turn off? Is there a fix?
AutoCAD 2009
why does Auto Save always turn itself off? This would have to be the most frustrating thing ever, is there an answer to it?
View 9 Replies View RelatedThe automatic save option keeps shutting off on one person in our office. She says she is not doing anything weird but all of a sudden, when she checks her auto save settings, the check box is clear.
View 8 Replies View Relatedmy Autosave keeps turning itself off. I am becoming suspicious that everytime autoCAD is updated, its' changing my settings.
View 3 Replies View Relatedhow can i auto save the project were i am working on?Still abode goes down sometime.How to save automaticly each 15 min fe?
View 1 Replies View Related