I am trying to lasso an object in a picture something like an autosave goes off causing the lasso to capture parts of the picture that are not wanted. I have tried to find an auto save but do not seem able to.
View 1 RepliesI recently had some problems with auto-save. I was working on a project when my computer stoped working and I had to force shutting down. However, my Premiere CC is set to auto-save every 15 minutes. When I went to see the auto-save files I didn't find my entire work. I had several sequences previously the one I was left with. What had happen?
View 1 Replies View RelatedWhy does AutoCAD still have automatic save if it is not going to automatically save your files? I have used AutoCAD for over 20 years and when the introduced automatic saves, I thought it was the coolest thing since sliced bread. But apparently some time between release 2010 and 2012 it was redone or it just don't work. I can recall closing a drawing w/o saving by mistake after having worked on it for 2-3 hours and only loosing at the most 10 minutes of my time. I just did the same thing and lost about 2 hours worth of time and my automatic save was set to every 10 minutes as I have set it since automatic save was introduced.
View 4 Replies View RelatedI'm just trying to understand the reasoning behind the fact that seeminly every other product out there has an autosave and recovery feature..why am I paying so much for a product that will eventually crash and I lose all my work since my last save?
View 10 Replies View Relatedwhen using the autosave feature or having it enabled. When I work a lot of times I have a main file that I use as a template to create other pages from. So I will open template and update things on it and then save as and name that as a new file. My question is if I open this template file and make a few changes will it autosave those which will basically overwrite my template. I have the autosave feature turned off right now because I wasn't sure if it would do that.
View 7 Replies View RelatedI have an action that I created that reduces color saturation in JPEGS. I want to run this action with a batch, but every time I do, the batch pauses with the JPEG Options dialog (where you choose image quality).
Is there a way to automate that step of the process? Because I just want to save it on the highest quality setting for each picture.
I have over 1000 pictures to run this batch on, and I'm hoping there's a way to automate the JPEG options dialog box.
how can i auto save the project were i am working on?Still abode goes down sometime.How to save automaticly each 15 min fe?
View 1 Replies View RelatedIs it possible to change the file extension that Photoshop uses to autosave files? Another program that I use also autosaves and apparently uses the same extension. When I open that program, I get a message asking if I want to change the association back to that program.
View 1 Replies View RelatedI plan to shoot timelapse with two supposedly identical camera setups and stack images from the two cameras. Unfortunately the two lenses turn out not to be quite identical, so I need to correct/map images from one camera to match the field of view of the other.
A test showed that Photoshop's auto-align procedure can do the mapping sufficiently accurate. So now what I want to do is to have Photoshop calculate the mapping parameters once, then apply that projection identically to a batch of images. What I really hope to avoid is for Photoshop to recalculate the mapping separately for every single frame, both because it is a huge waste of time but also because the exact same mapping really should be applied to all images. Is there a way to do this, CS6?
I have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies View RelatedMy auto save keeps shutting off.
I drawing in Model Space, Plot or Publish in paper space. Some times I Plot if just print one tab, but if printing multiple tabs I publish.
What could be causing Auto Save to turn off? Is there a fix?
AutoCAD 2009
Paint.net auto saves my files as PNG. This is VERY annoying because I am saving many, many files. Each time I save I have to switch it to JPEG. If it is PNG I cannot see the file on my PC (it will be invisible). Plus, more programs use JPEG than PNG. This auto choosing PNG is a big waist of my time/energy/effort. is there an option to change this?
View 5 Replies View RelatedIn earlier versions I was given the option of enabling the Auto Save feature, and choosing the time intervals between saves. I chose every 2 minutes. If it crashed or was shut down in a reboot, the images on which I was working were recovered with their layers intact. Nothing was lost. I do not have that option in Version X4.
Nothing is ever saved with Version X4
why does Auto Save always turn itself off? This would have to be the most frustrating thing ever, is there an answer to it?
View 9 Replies View RelatedThe automatic save option keeps shutting off on one person in our office. She says she is not doing anything weird but all of a sudden, when she checks her auto save settings, the check box is clear.
View 8 Replies View Relatedmy Autosave keeps turning itself off. I am becoming suspicious that everytime autoCAD is updated, its' changing my settings.
View 3 Replies View RelatedI never save images in the .png format. I always use .jpg or .jpeg. Is there a way I can change the auto save from .png to .jpeg?
View 2 Replies View RelatedMy C-drive is filling up and a friend of mine, who also uses Premiere CS5, told me he periodically deletes whatever is saved in his Premiere Auto-Save folder and Preview-File folder to free up hard drive space. The problem is, I can find my Preview-File folder under My Documents/Adobe/5.0, but I can't find my Auto-Save folder, even after doing a Search in WIndows 7. I can't do anymore video editing projects until I free up space on my C-drive. Right now, I only have 1.7 Gb remaining on a 160 Gb hard drive. T
View 7 Replies View RelatedAuto save, in my opinion, is a pain, so I have removed the tick from the box and hope never to see it again.
Are these temporary files? Or are they saved to an unknown location to build up into a every increasing file. I have inspected the X5 folders and files, but can't locate where these files end up.
I have created an "addin" to monitor the "SAVE" & "NEW" button press on Inventor.What is the possibility of AutoDesk including this feature to the next release, or better still, creating a "patch" so that inventor can be upgraded to do it automatically, without the need to write an "addin"?
For Example,
If the user presses the "SAVE" button, AutoDesk Inventor would automatically look to see if a macro called "OnSave" exists. If it does, it "runs" the macro, if it does not exist, it works exactly as Inventor does now. This also would work in a similar way when pressing the "NEW" button.
A few days ago I updated Lightroom to version 4.3. Since then, the "auto save to xmp" doesn't work. It is checked, but I keep finding files that "have been changed recently". So not only that it's not auto-saving them, but it is also finding "new images" that "have been recently changed" even though I didn't open or edited them in the past several months..
View 8 Replies View RelatedThe photo files I import to Lightroom get saved under "Photos" and then under folders by date. I'd like to save them to the cloud (dropbox). How do I change their destination so they save there automatically?
View 2 Replies View RelatedSeeing if there is a option/3rd party plug in where it will save a dwf(x) along with the inventor files - WITHOUT using vault.I'm Currently using Inventor 2013.
View 1 Replies View RelatedEvery single premiere cc project file I have including my auto-save prj files will not load. I get the error message "The Project Appears to be Damaged, it can not be opened". This is for all my Premiere CC Projects. I have uninstalled and reinstalled Premiere with no avail. Is there anything I can do in order to salvage these corrupt files and the work/effort associated with them?
View 32 Replies View RelatedIs there any way to recover lost data after Paint Shop Pro X4 crashes?
There should at least be an option to save all open documents every x minutes. Where is this option?
I found where PSP saves the temp files and I recovered several of them. Is it possible to use these files to recover my data?
I was using these tool on a lot of images, because they often seemed to vastly improve them, making the colors pop on otherwise somewhat dull ones, and getting rid of unwanted color casts..
Later though I noticed that it is often at the cost of burning out hightlights in some areas beyond salvation.I also find shadow /highlight sometimes does this also.
Then I tried to protect some small areas with a mask before proceeding, but it seems that I can't find information on just painting a mask, but only videos with much more complex adjustment such as the Russel Crow or Lynda ones with maintaing hair detail while superimposing images, which is way beyond what I need in these cases.
If I try the wand to select and inverse I get unnatural looking divisions. Is it a matter of feathering to the right extent?
I have just moved from 7.0 to CS3 (and PC to Mac) and am currently trying to get to grips with the new features! Once which I love is the auto-align and auto-blend feature(s). My question is, is there any way to control how these features work? I have seen on some web sites people talk about 'fuzziness' sliders where you can control that if an object (pixels) appear in X% of the photos they should/shouldn't be included in the final image but I cannot find these.
My intention is to use these features to take photos of monuments and have the people who are moving about removed from the final image (I guess it's the auto-align that would do this.) I tried a test and took a number of photos at home but I kept moving one object around (a pen.) The pen appears in all the images but in a different location so it always appears in the final image. When I tried auto-align with a stack that included one image without the pen, the pen was removed from the final image. Given the first scenario (i.e. the object is in all the images but in a different location) is there any way of automatically removing it using auto-align or would this have to be a manual process? In the real world, it would be possible to take a photo of a monument with people in different locations but it would be much harder (or take a long time) to take one where at least one person was not in all the photos (there's always someone loitering.)
Yes, I'm probably the only person on the planet that wants this, but I liked how the Auto Tone auto adjusted the Exposure slider (ONLY!) and left all the other sliders at zero in the Lightroom 4 beta.
Is there a way to write a preset that returns that behavior?
I am facing problem while using Save / Save As / Save for web options in my Photoshop. On clicking Save / Save As commands, my photoshop gets closed abruptly and I am losing all data. If I choose Save for Web option, the file Save dialog box appears and when I click on the 'Save' button, the application gets closed abruptly.
It was working fine yesterday. My version is bundled in the Technical Communicator suite 3.5 and I faced some problems with Adobe Acrobat, for which my IT team took support from Adobe and got it resolved just two days ago. (Case ID - 184809966)
I use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies View RelatedI am having a catastrophic error in Inventor 2013.
When I attempt to save a drawing I have completed, I cannot save!
Can't save, save as or any other variation of save.
This is my issue every time I click save.