Photoshop :: CS6 Auto Save Feature
Jun 13, 2012
when using the autosave feature or having it enabled. When I work a lot of times I have a main file that I use as a template to create other pages from. So I will open template and update things on it and then save as and name that as a new file. My question is if I open this template file and make a few changes will it autosave those which will basically overwrite my template. I have the autosave feature turned off right now because I wasn't sure if it would do that.
View 7 Replies
ADVERTISEMENT
Nov 30, 2012
Is there a way to turn off the auto file browsing feature in the Organizer for PSE9?
View 2 Replies
View Related
Apr 5, 2013
Is there a way to turn off the auto-insert into Power clip feature (nuisance)?
I know I can hold down the "F" key to ignore, but seriously, this is a pain in the neck. Yes, I use Power clips extensively, but I need to control them instead of them controlling me.
View 5 Replies
View Related
Apr 22, 2014
I recently had some problems with auto-save. I was working on a project when my computer stoped working and I had to force shutting down. However, my Premiere CC is set to auto-save every 15 minutes. When I went to see the auto-save files I didn't find my entire work. I had several sequences previously the one I was left with. What had happen?
View 1 Replies
View Related
Feb 7, 2012
I used to use an image editor software (can't remember the name) that had an auto-straighten feature. Basically you could drag a line onto the image, and "draw" it along the correct angle of the image. Then the software would rotate the image just enough to make that line look completely horizontal.
Is there any way to do this in Paint.Net? Maybe with an Add-in? I loved that feature, and I find the layers rotate dialog box to be annoying to use.
View 2 Replies
View Related
Jun 24, 2011
Is there some way we can turn off the auto highlight feature in inventor 2012? I am working in a large assembly and every time I move the cursor over the assembly it is trying to pre highlite parts and assemblys and it really causing alot of delay in my work.
View 8 Replies
View Related
Sep 6, 2013
I am editing a Postgis table using the OSGeo FDO Provider for PostgreSQL/PostGIS in AutoCAD Map 3D 2012. As i have noticed that the serial type of the ID field does not give an automatic value to de ID field after inserting a new feature in the layer and after checking in (AutoCAD Map seems not to understand de nextval(sequence_name) function in the DEFAULT property of the ID field(thats how the autonumeric numbers work in PostgreSQL)), i am using a database side trigger which gives the next sequence value to the ID field of the new record. The trigger is launched BEFORE inserting a new record.
The problem is that after executing the trigger, in AutoCAD Map all the fields are still shown as null, and they are not displayed until i manually refresh the layer.
Is there any way to auto-refresh the layer after checking in a new feature?
View 2 Replies
View Related
Jul 27, 2012
Why does AutoCAD still have automatic save if it is not going to automatically save your files? I have used AutoCAD for over 20 years and when the introduced automatic saves, I thought it was the coolest thing since sliced bread. But apparently some time between release 2010 and 2012 it was redone or it just don't work. I can recall closing a drawing w/o saving by mistake after having worked on it for 2-3 hours and only loosing at the most 10 minutes of my time. I just did the same thing and lost about 2 hours worth of time and my automatic save was set to every 10 minutes as I have set it since automatic save was introduced.
View 4 Replies
View Related
Jun 10, 2012
Can you reverse the direction of an auto feature line generated from a corridor in C3D 2012?
View 4 Replies
View Related
Jul 13, 2007
Using photoshop CS and for some reason i'm unable to use the save for web option. It's there, I just cant select it. Do you know why this might be?
View 6 Replies
View Related
May 2, 2009
I am trying to lasso an object in a picture something like an autosave goes off causing the lasso to capture parts of the picture that are not wanted. I have tried to find an auto save but do not seem able to.
View 1 Replies
View Related
Sep 6, 2007
I have 5000 images in a large tree structure, and I need to reduce all of them to both 131x131 pixels and then 80x80 pixels whilst using the Save for Web feature. Save for web will make these images about 2kb to 4kb in size as opposed to Save As... which, on the lowest quality will save the image at about 20kb.
Now, due to this large tree structure, it would make sense to run an action on the entire folder and subfolders, right? The problem arises when recording an action and incorporating the Save for Web feature. One must specify which folder to save the optimized image into - one simply cannot just override the original file in the original folder.
I need to figure out exactly what the Save for Web feature does to the image to make it so small. I have found that one needs to change the colour profile from RGB to sRGB, but this does not let me Save As... to a 2kb file.
with doing a Manual "save for web" and outline each and every step needed to be done?
View 9 Replies
View Related
May 1, 2012
I'm just trying to understand the reasoning behind the fact that seeminly every other product out there has an autosave and recovery feature..why am I paying so much for a product that will eventually crash and I lose all my work since my last save?
View 10 Replies
View Related
Nov 13, 2006
I have an action that I created that reduces color saturation in JPEGS. I want to run this action with a batch, but every time I do, the batch pauses with the JPEG Options dialog (where you choose image quality).
Is there a way to automate that step of the process? Because I just want to save it on the highest quality setting for each picture.
I have over 1000 pictures to run this batch on, and I'm hoping there's a way to automate the JPEG options dialog box.
View 5 Replies
View Related
May 10, 2004
I've been using PS7 on my Mac OX 10.2.8 for some time now and it's worked well. The images I work on in PS7 look bright and true but now, all of a sudden, when I choose the "save for the web" feature, the image appears washed out. And continues to look washed out when I place in my pbase gallery. This is a new event.
The only thing I've done recently was tweak with some Adjustment levels using Scott Kelby's "The Photoshop Book for Digital Photographers." Everything looks great on my screen until I now use that one feature (which never affected the color saturation before.) I would think that doing any number tweaking would affect the image all the way throughout PS, not just when I use this one feature.
Can someone offer some places and numbers to look for that might be affecting how my images appear on line? Maybe I should go back to all the defaults?
View 6 Replies
View Related
May 28, 2013
how can i auto save the project were i am working on?Still abode goes down sometime.How to save automaticly each 15 min fe?
View 1 Replies
View Related
Nov 30, 2012
I work in full screen with Menu Bars 98% of the time. I also enjoy the new save in background feature. The problem is that when in full screen I can't tell when it's saving and the status of the save. This is particularly frustrating when I'm trying to close a file. I think there needs to be an option to have it save in background but pop up a status window, or some way to see the status of the save while in full screen.
View 6 Replies
View Related
Jan 31, 2013
Is it possible to change the file extension that Photoshop uses to autosave files? Another program that I use also autosaves and apparently uses the same extension. When I open that program, I get a message asking if I want to change the association back to that program.
View 1 Replies
View Related
Dec 3, 2012
I plan to shoot timelapse with two supposedly identical camera setups and stack images from the two cameras. Unfortunately the two lenses turn out not to be quite identical, so I need to correct/map images from one camera to match the field of view of the other.
A test showed that Photoshop's auto-align procedure can do the mapping sufficiently accurate. So now what I want to do is to have Photoshop calculate the mapping parameters once, then apply that projection identically to a batch of images. What I really hope to avoid is for Photoshop to recalculate the mapping separately for every single frame, both because it is a huge waste of time but also because the exact same mapping really should be applied to all images. Is there a way to do this, CS6?
View 2 Replies
View Related
May 18, 2009
I have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies
View Related
Feb 22, 2012
My auto save keeps shutting off.
I drawing in Model Space, Plot or Publish in paper space. Some times I Plot if just print one tab, but if printing multiple tabs I publish.
What could be causing Auto Save to turn off? Is there a fix?
AutoCAD 2009
View 2 Replies
View Related
May 10, 2011
Paint.net auto saves my files as PNG. This is VERY annoying because I am saving many, many files. Each time I save I have to switch it to JPEG. If it is PNG I cannot see the file on my PC (it will be invisible). Plus, more programs use JPEG than PNG. This auto choosing PNG is a big waist of my time/energy/effort. is there an option to change this?
View 5 Replies
View Related
May 30, 2012
i hadn't used mudbox in a while and get busy right away sculpting and painting, save my file, keep on working, and after some time forget to save again... here comes a little red blinking "button" (so i assumed) telling me to save, not just a single time, but several times. I see that i roll over and click it as each time i do it stops blinking... assuming that it does indeed SAVE the freaking thing. Not too much of a crazy assumption i believe since it's 2012 and after decades of dealing with crashes and corrupt files or lost work, every single piece of software i use in production do have at least an auto-save system.
View 2 Replies
View Related
Jan 11, 2012
In earlier versions I was given the option of enabling the Auto Save feature, and choosing the time intervals between saves. I chose every 2 minutes. If it crashed or was shut down in a reboot, the images on which I was working were recovered with their layers intact. Nothing was lost. I do not have that option in Version X4.
Nothing is ever saved with Version X4
View 5 Replies
View Related
Sep 11, 2012
why does Auto Save always turn itself off? This would have to be the most frustrating thing ever, is there an answer to it?
View 9 Replies
View Related
Mar 10, 2008
The automatic save option keeps shutting off on one person in our office. She says she is not doing anything weird but all of a sudden, when she checks her auto save settings, the check box is clear.
View 8 Replies
View Related
Aug 9, 2010
my Autosave keeps turning itself off. I am becoming suspicious that everytime autoCAD is updated, its' changing my settings.
View 3 Replies
View Related
Mar 23, 2013
I never save images in the .png format. I always use .jpg or .jpeg. Is there a way I can change the auto save from .png to .jpeg?
View 2 Replies
View Related
Jan 10, 2012
My C-drive is filling up and a friend of mine, who also uses Premiere CS5, told me he periodically deletes whatever is saved in his Premiere Auto-Save folder and Preview-File folder to free up hard drive space. The problem is, I can find my Preview-File folder under My Documents/Adobe/5.0, but I can't find my Auto-Save folder, even after doing a Search in WIndows 7. I can't do anymore video editing projects until I free up space on my C-drive. Right now, I only have 1.7 Gb remaining on a 160 Gb hard drive. T
View 7 Replies
View Related
May 12, 2013
Auto save, in my opinion, is a pain, so I have removed the tick from the box and hope never to see it again.
Are these temporary files? Or are they saved to an unknown location to build up into a every increasing file. I have inspected the X5 folders and files, but can't locate where these files end up.
View 4 Replies
View Related
Jul 16, 2013
I have created an "addin" to monitor the "SAVE" & "NEW" button press on Inventor.What is the possibility of AutoDesk including this feature to the next release, or better still, creating a "patch" so that inventor can be upgraded to do it automatically, without the need to write an "addin"?
For Example,
If the user presses the "SAVE" button, AutoDesk Inventor would automatically look to see if a macro called "OnSave" exists. If it does, it "runs" the macro, if it does not exist, it works exactly as Inventor does now. This also would work in a similar way when pressing the "NEW" button.
View 3 Replies
View Related
