I'm just trying to understand the reasoning behind the fact that seeminly every other product out there has an autosave and recovery feature..why am I paying so much for a product that will eventually crash and I lose all my work since my last save?
View 10 RepliesI have read several forums about how to disable the auto-recovery feature. However, I don't want to disable the auto-recovery because I like that it saves my work in case of crash.
It's just annoying that every time I open Photoshop all those previous files auto open. Is there anyway to make it stop? I read that there is a file that you delete, but will that stop the auto-recovery feature?
My understanding of Auto Recover is that when a working file is saved and closed, the corresponding Auto Recover psb should be trashed automatically.
Every evening I save and close all my work, quit Photoshop and shut down the Mac. Every morning when I start Photoshop, at least one Auto Recovery file opens. It's the last file(s) I was working on the previous evening.
I've toggled Auto Recover on/off, trashed the folder and had CS6 recreate it. Nothing works. Every morning, I am presented with a psb of the previous evening's work.
My scratch disk is a dedicated 100gb SSD. I have triple verified that CS6 is not writing recovery files to a different location.
Whenever he starts Photoshop up, all of his auto recovery files open. For example - when he goes to open a psd of a web design, he will get about 25 files opening with the title "JobName recovered".
I had a meander around the forums looking for possible fixes and information about the Auto Recovery feature, but so far have not been able to cure this ailment.
I have previously disabled the Auto Recovery feature as well as deleting the auto recovery files, yet this was only had a band-aid to amuptation effect. The auto recovery files have reappeared and are now opening again upon start up.
I have successfully saved my file, shut down Photoshop without incident, and yet upon opening CS6 it starts opening the latest autorecovery file. I need to have autorecovery on for the work loss protection it provides, but it can get confusing to have an Autorecovery file open instead of the file I had meant to open. ( This is also happening on a colleague's computer.)
I'm running Mac OS X version 10.8.3
2x2.66 GHz 6-Core Intel Xeon
64 GB 1333 MHz DDR3
CS6 Version 13.0.4
It's happened several times with a variety of files. They are all Grayscale layered PSB's, in the 1.5 - 3 GB range.
So, I got a bad drawing from a vendor today, which locked up autocad. Now, each time I start, it tries to "auto recover" and gets hung again.
Is there a way to start Autocad in "safe mode" or something similar?
Is there any way to turn off auto-recovery in LR4 2012 process engine? When shooting on white seamless, I gradually bring up the background lights until I see the raw file just blowing out as I want it, at my shooting aperture. With LR4 and auto-recovery - using this method of 'metering' if you like - I'm adding 2-3 extra stops of light than I would expect before this happens, which then gives me wrap around and flare problems. I'd like to take back control of this, so I'm not guessing where my pure white is any more..
View 21 Replies View RelatedMy Photoshop crashed in the middle of saving. There's now a tmp file in its place. I tried opening it with Photoshop but it got an error. Is there any recovery program for getting back corrupted save files?
View 5 Replies View Relatedwhen I open my revit file, I got the following information.
once I close the up diagram, revit diliver the next message.
I recently had some problems with auto-save. I was working on a project when my computer stoped working and I had to force shutting down. However, my Premiere CC is set to auto-save every 15 minutes. When I went to see the auto-save files I didn't find my entire work. I had several sequences previously the one I was left with. What had happen?
View 1 Replies View RelatedWhy does AutoCAD still have automatic save if it is not going to automatically save your files? I have used AutoCAD for over 20 years and when the introduced automatic saves, I thought it was the coolest thing since sliced bread. But apparently some time between release 2010 and 2012 it was redone or it just don't work. I can recall closing a drawing w/o saving by mistake after having worked on it for 2-3 hours and only loosing at the most 10 minutes of my time. I just did the same thing and lost about 2 hours worth of time and my automatic save was set to every 10 minutes as I have set it since automatic save was introduced.
View 4 Replies View RelatedI’ve just worked on a series of clients drawing using AutoCad 2009. They are using AutoCad 2013. out of 20 or so drawings several drawings when opening with 2013 open up with Errors requesting recovery is required due to any number of errors ranging from 3 to 7 on average. The error message asks [yes] to recover and it aborts or [no] to continue and the drawing opens ok without further error. If I recover the drawings, and save-as 2013 or other, the same errors appear regardless. However if I open the same drawings using my version of 2009, I didn’t get any errors. The original drawings were compatible with 2009 without conversion.
View 3 Replies View RelatedI am trying to lasso an object in a picture something like an autosave goes off causing the lasso to capture parts of the picture that are not wanted. I have tried to find an auto save but do not seem able to.
View 1 Replies View Relatedwhen using the autosave feature or having it enabled. When I work a lot of times I have a main file that I use as a template to create other pages from. So I will open template and update things on it and then save as and name that as a new file. My question is if I open this template file and make a few changes will it autosave those which will basically overwrite my template. I have the autosave feature turned off right now because I wasn't sure if it would do that.
View 7 Replies View RelatedI have an action that I created that reduces color saturation in JPEGS. I want to run this action with a batch, but every time I do, the batch pauses with the JPEG Options dialog (where you choose image quality).
Is there a way to automate that step of the process? Because I just want to save it on the highest quality setting for each picture.
I have over 1000 pictures to run this batch on, and I'm hoping there's a way to automate the JPEG options dialog box.
how can i auto save the project were i am working on?Still abode goes down sometime.How to save automaticly each 15 min fe?
View 1 Replies View RelatedIs it possible to change the file extension that Photoshop uses to autosave files? Another program that I use also autosaves and apparently uses the same extension. When I open that program, I get a message asking if I want to change the association back to that program.
View 1 Replies View RelatedI plan to shoot timelapse with two supposedly identical camera setups and stack images from the two cameras. Unfortunately the two lenses turn out not to be quite identical, so I need to correct/map images from one camera to match the field of view of the other.
A test showed that Photoshop's auto-align procedure can do the mapping sufficiently accurate. So now what I want to do is to have Photoshop calculate the mapping parameters once, then apply that projection identically to a batch of images. What I really hope to avoid is for Photoshop to recalculate the mapping separately for every single frame, both because it is a huge waste of time but also because the exact same mapping really should be applied to all images. Is there a way to do this, CS6?
I have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies View RelatedMy auto save keeps shutting off.
I drawing in Model Space, Plot or Publish in paper space. Some times I Plot if just print one tab, but if printing multiple tabs I publish.
What could be causing Auto Save to turn off? Is there a fix?
AutoCAD 2009
Paint.net auto saves my files as PNG. This is VERY annoying because I am saving many, many files. Each time I save I have to switch it to JPEG. If it is PNG I cannot see the file on my PC (it will be invisible). Plus, more programs use JPEG than PNG. This auto choosing PNG is a big waist of my time/energy/effort. is there an option to change this?
View 5 Replies View RelatedIn earlier versions I was given the option of enabling the Auto Save feature, and choosing the time intervals between saves. I chose every 2 minutes. If it crashed or was shut down in a reboot, the images on which I was working were recovered with their layers intact. Nothing was lost. I do not have that option in Version X4.
Nothing is ever saved with Version X4
why does Auto Save always turn itself off? This would have to be the most frustrating thing ever, is there an answer to it?
View 9 Replies View RelatedThe automatic save option keeps shutting off on one person in our office. She says she is not doing anything weird but all of a sudden, when she checks her auto save settings, the check box is clear.
View 8 Replies View Relatedmy Autosave keeps turning itself off. I am becoming suspicious that everytime autoCAD is updated, its' changing my settings.
View 3 Replies View RelatedI never save images in the .png format. I always use .jpg or .jpeg. Is there a way I can change the auto save from .png to .jpeg?
View 2 Replies View RelatedMy C-drive is filling up and a friend of mine, who also uses Premiere CS5, told me he periodically deletes whatever is saved in his Premiere Auto-Save folder and Preview-File folder to free up hard drive space. The problem is, I can find my Preview-File folder under My Documents/Adobe/5.0, but I can't find my Auto-Save folder, even after doing a Search in WIndows 7. I can't do anymore video editing projects until I free up space on my C-drive. Right now, I only have 1.7 Gb remaining on a 160 Gb hard drive. T
View 7 Replies View RelatedAuto save, in my opinion, is a pain, so I have removed the tick from the box and hope never to see it again.
Are these temporary files? Or are they saved to an unknown location to build up into a every increasing file. I have inspected the X5 folders and files, but can't locate where these files end up.
I have created an "addin" to monitor the "SAVE" & "NEW" button press on Inventor.What is the possibility of AutoDesk including this feature to the next release, or better still, creating a "patch" so that inventor can be upgraded to do it automatically, without the need to write an "addin"?
For Example,
If the user presses the "SAVE" button, AutoDesk Inventor would automatically look to see if a macro called "OnSave" exists. If it does, it "runs" the macro, if it does not exist, it works exactly as Inventor does now. This also would work in a similar way when pressing the "NEW" button.
A few days ago I updated Lightroom to version 4.3. Since then, the "auto save to xmp" doesn't work. It is checked, but I keep finding files that "have been changed recently". So not only that it's not auto-saving them, but it is also finding "new images" that "have been recently changed" even though I didn't open or edited them in the past several months..
View 8 Replies View RelatedThe photo files I import to Lightroom get saved under "Photos" and then under folders by date. I'd like to save them to the cloud (dropbox). How do I change their destination so they save there automatically?
View 2 Replies View Related