Photoshop :: CS6 - Auto Recovery Files All Opening Upon Program Start Up?
Nov 21, 2013
Whenever he starts Photoshop up, all of his auto recovery files open. For example - when he goes to open a psd of a web design, he will get about 25 files opening with the title "JobName recovered".
I had a meander around the forums looking for possible fixes and information about the Auto Recovery feature, but so far have not been able to cure this ailment.
I have previously disabled the Auto Recovery feature as well as deleting the auto recovery files, yet this was only had a band-aid to amuptation effect. The auto recovery files have reappeared and are now opening again upon start up.
View 10 Replies
ADVERTISEMENT
Apr 12, 2013
I have successfully saved my file, shut down Photoshop without incident, and yet upon opening CS6 it starts opening the latest autorecovery file. I need to have autorecovery on for the work loss protection it provides, but it can get confusing to have an Autorecovery file open instead of the file I had meant to open. ( This is also happening on a colleague's computer.)
I'm running Mac OS X version 10.8.3
2x2.66 GHz 6-Core Intel Xeon
64 GB 1333 MHz DDR3
CS6 Version 13.0.4
It's happened several times with a variety of files. They are all Grayscale layered PSB's, in the 1.5 - 3 GB range.
View 2 Replies
View Related
Apr 26, 2013
I have read several forums about how to disable the auto-recovery feature. However, I don't want to disable the auto-recovery because I like that it saves my work in case of crash.
It's just annoying that every time I open Photoshop all those previous files auto open. Is there anyway to make it stop? I read that there is a file that you delete, but will that stop the auto-recovery feature?
View 3 Replies
View Related
May 8, 2013
My understanding of Auto Recover is that when a working file is saved and closed, the corresponding Auto Recover psb should be trashed automatically.
Every evening I save and close all my work, quit Photoshop and shut down the Mac. Every morning when I start Photoshop, at least one Auto Recovery file opens. It's the last file(s) I was working on the previous evening.
I've toggled Auto Recover on/off, trashed the folder and had CS6 recreate it. Nothing works. Every morning, I am presented with a psb of the previous evening's work.
My scratch disk is a dedicated 100gb SSD. I have triple verified that CS6 is not writing recovery files to a different location.
View 1 Replies
View Related
May 1, 2012
I'm just trying to understand the reasoning behind the fact that seeminly every other product out there has an autosave and recovery feature..why am I paying so much for a product that will eventually crash and I lose all my work since my last save?
View 10 Replies
View Related
Sep 27, 2012
How do I change a specific file type association in Bridge CS5, namely the .psd file type? I had installed Photoshop CS6, but am unable to use it due to extreme slowness (another problem, not for this question). I have reverted to using Photoshop CS5 and Bridge CS5.
Now when I double-click on a .psd file in Bridge CS5 to open it (or right-click on the .psd file) , the file opens up in the glacially slow CS6. I went to edit> preferences>file type associations to change the association to Photoshop CS5, but .psd is not listed as a file type (.jpg and .dng and a host of other file types are listed). How can I change the association if I cannot find the file type? (BTW: I have changed the file type association in Windows Explorer; I am running Windows XP.) I know I can open PS CS5 manually and scroll to the image I want to open but, to my mind, that defeats one of the main purposes of Bridge.
View 2 Replies
View Related
Nov 18, 2012
So I just downloaded and ran the updates for lightroom 3 (now 3.6) and now when I open folders to view my picture files, the canon raw files are no longer associated with lightroom. Let me further explain.
After shooting, I would plug my card into a card reader and see which pictures I wanted to view in lightroom. I shoot in jpeg and raw so I could view the jpeg thumbnails to see which raw files I wanted to open in lightroom. The raw files would be "labeled" with the LR icon and I would then doulbe click the raw file I wanted and by doing so it would initiate the opeing of LR. However, now the raw files do not have the LR icon assocaited with the raw files and I can longer clcik the raw files to automatically open lightroom.
Did something change with the update?
View 2 Replies
View Related
May 7, 2012
I download PSCS6 beta, and since then, there are some files that I cannot open at all.Got a message ( in both, PS CS 5.1 and in CS6 ) that say;
"Could not complete you request because a program error"
View 15 Replies
View Related
Oct 9, 2013
So, I got a bad drawing from a vendor today, which locked up autocad. Now, each time I start, it tries to "auto recover" and gets hung again.
Is there a way to start Autocad in "safe mode" or something similar?
View 9 Replies
View Related
Feb 11, 2013
Is there any way to turn off auto-recovery in LR4 2012 process engine? When shooting on white seamless, I gradually bring up the background lights until I see the raw file just blowing out as I want it, at my shooting aperture. With LR4 and auto-recovery - using this method of 'metering' if you like - I'm adding 2-3 extra stops of light than I would expect before this happens, which then gives me wrap around and flare problems. I'd like to take back control of this, so I'm not guessing where my pure white is any more..
View 21 Replies
View Related
Mar 24, 2013
Once open Photoshop and clink on Edit, this message shows up, and if choose "Check online for solution..." no new action happen, the program shut down, restating does not work. Before there were no troubles with program.
View 2 Replies
View Related
Nov 19, 2012
how do i disable auto-start in Adobe Quick Launch; elements 3.0
View 1 Replies
View Related
Mar 14, 2013
Cannot find explanations as for most recovery seems to work fine regardless of where the scratch drive is set. For me it only seems to work if the scratch is set as boot drive, C:.
I became aware of this after recently adding an SSD to my system and accordingly setting the scratch disk to one of the other larger drives. After a photoshop crash there was no recovery - surprising as it had worked flawlessly in the past. I did a test, switching the scratch location among a few drives and seeing where the recovery files were written - the answer was C: drive. In any other location the PSAutoRecover folder was created, but no files ever appear there.
View 8 Replies
View Related
Jul 14, 2004
My Photoshop crashed in the middle of saving. There's now a tmp file in its place. I tried opening it with Photoshop but it got an error. Is there any recovery program for getting back corrupted save files?
View 5 Replies
View Related
Jul 14, 2013
My program refuses to start and reports failure 150:30 - get support from adobe
View 1 Replies
View Related
Nov 10, 2012
I accidentally deleted some photos from a memory card. I recovered them using software called "Recover My Files". This software recovered the files but now I can't open them in CS3. I took these with an old Canon Rebel DSLR and they should not need converting, they opened fine before I deleted them.
View 2 Replies
View Related
Dec 25, 2012
Photoshop Elements 11 and Premiere Elememts 11 cannot get started - launcher can be opened, but program doesn't start..I'm working with Windows 7 and I have already installed the newest drivers for the GeForce GTX 550 Ti - but still no start of the program after launching!
same applies to older installed version Photoshop Elements 8 and Photoshop Elements 10 which were working a couple of days ago.
View 1 Replies
View Related
May 22, 2013
Is this something easy I can do? Have my Macro Auto Open Upon Start Up?
Okay, so the simple macro i have been working on isnt just for personal use. We will use this macro all day long - but the issue is - my coworkers im sharing the macro with would prefer the macro open when program opens.
Now that i had set the macro's position down - how do i got about having the macro auto open upone start up.
View 6 Replies
View Related
Jul 11, 2011
Just upgraded from X3 to X4 & have found that X4 won't start -- I get an immediate Windows error: "Corel VideoPro has stopped working." I tried running as administrator with the same result.
Installation seemed to go fine & reboot went fine . . . the program just won't start (although X3 continues to run as normal).
Let's see . . . Vista Ultimate 32-bit, 4 GB RAM, 2.67 GHz Intel Core2 Quad Q6700, 8-10 TB hard drive space, NVIDIA GeForce 8800 GTX graphics card.
View 7 Replies
View Related
Jan 9, 2014
Loaded CD and it will not start
View 2 Replies
View Related
Feb 22, 2013
why my photoshop 7 all of a sudden will not open? I uninstalled it...restarted my computer...reinstalled 6 & 7(update) and nothing. It did not put a short cut on my desktop either. I tryed to open it from the start menu..still nothing
View 5 Replies
View Related
Apr 12, 2012
How to prevent Lightroom auto-start when inserting flash stick or CD?
View 1 Replies
View Related
Jun 6, 2013
I draw 3 lines to form an open polyline. They are still in lines, not converted into a polyline.
How do I find the start or end point of the polyline with program? I am thinking to check all points which is not shared by two lines.
View 2 Replies
View Related
Mar 21, 2013
I had a hdd crash, I took the hdd to data recovery and they did recover something but some of the important dwg files are invalid.
From my understanding, computers use two files: pagefile.sys and hiberfil.sys to store data used at a given time, for quick access (and other reasons). I have these files from the broken hdd but I don't know how to open them.
How they can be opened? How to successfully recover dwg files from them? the computer does it all the time so there must be a way.
View 1 Replies
View Related
Oct 15, 2011
I am running acad lt 2012 on windows 7- at acad startup I am receiving a fatal error message
"unhandled access violation reading 0x008 exception at 4135104h"
Windows updates are all current.
View 1 Replies
View Related
Aug 17, 2002
I am working in PS 7 OS 10.1.5. I have a file that was working on, saving as I went along. I closed the file and when I tried to reopen it, the file would not open. I get a message ... File can not be opened because of a program error...
View 9 Replies
View Related
May 1, 2013
When opened, PS CS6 generates a "Could not complete your request because of a program error" dialog. I click OK and the program runs. However, File>Automate>PhotoMerge generates Error 8800 with reference to Line: 1085 --> if ((app.systemInformation.search(/PhotomergeUI/) < 0
I delete the program, reload from Cloud and it runs OK until update the program via cloud services. Repeat above error sequence.
View 1 Replies
View Related
Nov 8, 2012
i can visualize a PSD or AI from Windows without opening the program?
WINDOWS 7
PHOTOSHOP CS6
View 1 Replies
View Related
Jul 8, 2013
I have Windows 7 64 pro installed. Tried the CC on Windows 8 64bit pro and they didn't play well together. Windows 7 seems to work fine. Good enough. So, I have the 64 bit version of PS CC pinned to the taskbar. When I click on it, it opens right up. Then if I go to Lightroom 5 and open a file, it opens right up in Photoshop CC 64 bit. However, if PS is not open and I open a file from lightroom, Photoshop CC 32bit opens. Not what I want.
Ok, so you say go the defaults menu and change the default opening program? Doesn't work. Switches right back to CC 32bit.
View 4 Replies
View Related
Nov 11, 2008
I tried reinstalling, uninstalling, reinstalling, updating the graphics driver...
View 1 Replies
View Related
Oct 30, 2012
I have reinstalled this program 3 times arlready and the Auto Music feature still does not work? Every time i make a project and want to add some music off the Auto Music feature the whole program crashes instantly? I keep getting over and over again, Unspecified Error? Everything thing else works in the program except the Auto Music.
View 2 Replies
View Related
