Photoshop :: CS6 Is Opening Auto-recovery File Even When Program Had Been Shutdown Properly?
Apr 12, 2013
I have successfully saved my file, shut down Photoshop without incident, and yet upon opening CS6 it starts opening the latest autorecovery file. I need to have autorecovery on for the work loss protection it provides, but it can get confusing to have an Autorecovery file open instead of the file I had meant to open. ( This is also happening on a colleague's computer.)
I'm running Mac OS X version 10.8.3
2x2.66 GHz 6-Core Intel Xeon
64 GB 1333 MHz DDR3
CS6 Version 13.0.4
It's happened several times with a variety of files. They are all Grayscale layered PSB's, in the 1.5 - 3 GB range.
View 2 Replies
ADVERTISEMENT
Nov 21, 2013
Whenever he starts Photoshop up, all of his auto recovery files open. For example - when he goes to open a psd of a web design, he will get about 25 files opening with the title "JobName recovered".
I had a meander around the forums looking for possible fixes and information about the Auto Recovery feature, but so far have not been able to cure this ailment.
I have previously disabled the Auto Recovery feature as well as deleting the auto recovery files, yet this was only had a band-aid to amuptation effect. The auto recovery files have reappeared and are now opening again upon start up.
View 10 Replies
View Related
Oct 24, 2013
photoshop CC, the program, shutdown directley.How can I run photoshop cc without shuting down?
View 1 Replies
View Related
Oct 17, 2008
I have Photoshop CS (version 8.0) running on Windows XP Home (SP3). I searched the help files, FAQs, and the forums and didn't find anything related to this.
Today I opened a document I've been working on, created a new layer, picked a default 9 pixel hard round brush, and when I clicked on the canvas to paint I got "could not complete the task due to a program error" and right after this Photoshop shut down.
I ran my anti-virus, but the computer is clean. I then checked all the brushes in my Photoshop folder to see if there were any odd ones in there - there weren't. Then I closed PS and when I opened it again I held down Shift+Ctrl+Alt to reset the Prefs file. I created a new document and reset the brushes, then I tried once again to paint with a default brush. Again I received the same program error and PS shut down.
I uninstalled PS and reinstalled the program. I restarted my computer and opened PS and tried painting again - the same error, only this time PS didn't shut itself down.
I'm at a loss here. I know Photoshop can have some psychotic moments, but this is the first time I have encountered this weird behavior. If anyone can give me some suggestions on what might be happening and how to remedy it I would appreciate it.
View 11 Replies
View Related
May 19, 2013
CS6 not only shuts down itself, it shuts down my computer. I have a high-end graphics card (which I specifically got to run my photo-editing monitor), i7 processor, Win8, 64-bit, high resolution. It always happens, without fail, when I choose a large size brush or whatever tool in cloning, spot-healing, dodging, burning, etc). Otherwise, it runs fine. But if I choose a large brush, etc, it only shows me a half circle instead of the full circle, freezes PS, shuts down my computer, and then the computer re-starts.
I used this same PS program on my previous Win7 64-bit computer, which had far less capability, processor, graphics, and other credentials than this current one. It has nothing to do with having other apps running because it happens regardless. It has nothing to do with Bridge because I don't use Bridge. It happens every time as described above. When the computer boots itself back up, there's an option for me to send the notice of the error to Microsoft, which I've done about 50 times. Could it have something to do with Win8? Hope not, because I checked before I (regrettably) got a computer with Win8 to make sure Photoshop was compatible with Win8.
View 7 Replies
View Related
May 1, 2012
I'm just trying to understand the reasoning behind the fact that seeminly every other product out there has an autosave and recovery feature..why am I paying so much for a product that will eventually crash and I lose all my work since my last save?
View 10 Replies
View Related
Apr 26, 2013
I have read several forums about how to disable the auto-recovery feature. However, I don't want to disable the auto-recovery because I like that it saves my work in case of crash.
It's just annoying that every time I open Photoshop all those previous files auto open. Is there anyway to make it stop? I read that there is a file that you delete, but will that stop the auto-recovery feature?
View 3 Replies
View Related
May 8, 2013
My understanding of Auto Recover is that when a working file is saved and closed, the corresponding Auto Recover psb should be trashed automatically.
Every evening I save and close all my work, quit Photoshop and shut down the Mac. Every morning when I start Photoshop, at least one Auto Recovery file opens. It's the last file(s) I was working on the previous evening.
I've toggled Auto Recover on/off, trashed the folder and had CS6 recreate it. Nothing works. Every morning, I am presented with a psb of the previous evening's work.
My scratch disk is a dedicated 100gb SSD. I have triple verified that CS6 is not writing recovery files to a different location.
View 1 Replies
View Related
Oct 3, 2013
In illustrator I like my row size to be at 50px in size. Every time I close down AI and reopen it later it seems that the layers have reverted back to their default sizes (I think its like normal or somthing cartoonishly small)
To get to the option panel I'm talking about, bring up your layers in AI then in the top right drop down menu select Panel Options at the very bottom of the contextule menu, and in that window the top options are "Row Size".This is where I pick "Other" and then set it to 50px (every time).
View 1 Replies
View Related
Feb 24, 2013
How do I turn off auto-rotation when opening a file? Photoshop Elements 9.
View 3 Replies
View Related
Oct 9, 2013
So, I got a bad drawing from a vendor today, which locked up autocad. Now, each time I start, it tries to "auto recover" and gets hung again.
Is there a way to start Autocad in "safe mode" or something similar?
View 9 Replies
View Related
Mar 25, 2013
i installed coreldraw x6 about two weeks to try and i liked it so much and my windows gone down and when i reinstalled windows and reinstalled coreldraw and tried to open a file was created with coreldraw x6 it give me error and program closed.
the problem is:
Problem signature:
Problem Event Name:BEX64
Application Name:CorelDrw.exe
Application Version:16.1.0.843
Application Timestamp:4fff8c8c
Fault Module Name:CdrFnt.dll
Fault Module Version:16.1.0.843
Fault Module Timestamp:4fff8cc6
Exception Offset:0000000000009181
Exception c0000409
Exception Data:0000000000000000
OS Version:6.1.7601.2.1.0.256.1
Locale ID:4097
Additional Information 1:2ac4
Additional Information 2:2ac4c22809adbef32ecbe94fc4b7c7b9
Additional Information 3:d787
Additional Information 4:d787405ff983cb0cc3e60c8be69cf6a8
Read our privacy statement online: [URL]........
If the online privacy statement is not available, please read our privacy statement offline:
C:Windowssystem32en-USerofflps.txt
View 3 Replies
View Related
Feb 11, 2013
Is there any way to turn off auto-recovery in LR4 2012 process engine? When shooting on white seamless, I gradually bring up the background lights until I see the raw file just blowing out as I want it, at my shooting aperture. With LR4 and auto-recovery - using this method of 'metering' if you like - I'm adding 2-3 extra stops of light than I would expect before this happens, which then gives me wrap around and flare problems. I'd like to take back control of this, so I'm not guessing where my pure white is any more..
View 21 Replies
View Related
Dec 31, 2012
Is there anyway to recover a PSD file in CS5.1, once it's been saved in another format and resized?
View 2 Replies
View Related
Jul 14, 2013
There is an apply auto tone adjustments checkbox in preferences, but it does not work properly. After checking it, some photos still require to click on auto button on the basic panel.
View 2 Replies
View Related
Nov 25, 2012
when importing in Lightroom 4, the auto tone adjustment function does not work properly. Most images come out strongly overexposed and there is no way to stop it
View 2 Replies
View Related
Oct 13, 2011
Have an AutoLisp program that inserts a block with attributes. Been using it forever. Yesterday I ran the program and somehow when the block is inserted, it skips the Y scaling factor. The program should insert a block at a point with a X scale of 19.2, Y scale of 19.2, Rotation at 0 and then four attribute values.
What is happening is the block is inserted at the correct point and X scaling factor, but the Y scaling factor goes in for the Rotation angle (19.2 degrees), the Rotation angle goes in as the first attribute and the remaining attributes are shifted over and the last attribute is missing.Line of code is:
(command "INSERT" "CNVTAG" inspt scl scl 0 text1 text2 text3 text4)
The command prompt displays:
Command: (command "INSERT" "CNVTAG" inspt scl scl 0 text1 text2 text3 text4)
INSERT Enter block name or [?] <NEWWHDBORD>: CNVTAG
Units: Inches Conversion: 1.0000
Specify insertion point or [Basepoint/Scale/Rotate]: Specify scale factor <1>:
19.20000000000000
Specify rotation angle <0>: 19.20000000000000
Enter attribute values
Conveyor number: 0 Conveyor Speed: 5315-BCS Motor Horsepower: 1.5hp Release
Mode: 45/90fpm
I looked at the system variables INSUNITS, INSUNITSDEFTARGET and INSUNITSDEFSOURCE AND THEY ARE ALL SET AT 0..Currently using AutoCAD 2010.
View 3 Replies
View Related
Aug 17, 2002
I am working in PS 7 OS 10.1.5. I have a file that was working on, saving as I went along. I closed the file and when I tried to reopen it, the file would not open. I get a message ... File can not be opened because of a program error...
View 9 Replies
View Related
Nov 16, 2011
Had a crash eariler today and saved the A.R.M. file through the dialog box. Where again does it save to or what file type is it? I've searched the Corel Program folder but don't see it, isn't it in the user folder or some temp folder for CorelDraw?
View 2 Replies
View Related
Oct 27, 2013
I was subject to a 10 minute power outage and lost the computer. when power returned, I tried to recover my corelDraw X4 file. No Luck. Inspite of the "backup" being scheduled every 5 minutes. the one backup file was 1 hour old. The documentation said that the CorelDraw system stored a recovery file elsewhere and that I should go to the "File Recovery Dialog Box and "Click" the recovery file. Where is this "File Recovery Dialog Box" ?
View 11 Replies
View Related
Nov 22, 2013
when I open my revit file, I got the following information.
once I close the up diagram, revit diliver the next message.
View 3 Replies
View Related
May 15, 2013
So my time has come and I have just been bitten by the Illegal Operand failure upon opening a document. The doc was created in AiCS3 but I'm trying to follow the recovery procedure in AiCS6, described here: URL>....The problem is that at step 3 when I'm holding down the three keys, and hitting Open, Windows 7 is triggering the country suffix behavior and appends the country code to the selected file name, in my case - .pl. This makes my file selection invalid (myfile.ai.pl). I guess this comes from a web browser (I have almost all of them installed).
What lead the file to corruption was the spiral tool. WHen I drew the shape, all of a sudden the entire pasteboard (usually filled with dense, tiny checkerboard pattern) got filled with the stroke or fill color. I saved the file and that was it.
View 12 Replies
View Related
Nov 22, 2013
i accidentally Shift+Del a folder with my AEP's in it. i used a data recovery program to recover those files. now when trying to open them i get this error:
Unable to import file "..." as project (bad format or not readable)i kind of got my hopes up while using the recovery program, can this error be worked around or is the file stuffed ?
View 1 Replies
View Related
Sep 27, 2012
How do I change a specific file type association in Bridge CS5, namely the .psd file type? I had installed Photoshop CS6, but am unable to use it due to extreme slowness (another problem, not for this question). I have reverted to using Photoshop CS5 and Bridge CS5.
Now when I double-click on a .psd file in Bridge CS5 to open it (or right-click on the .psd file) , the file opens up in the glacially slow CS6. I went to edit> preferences>file type associations to change the association to Photoshop CS5, but .psd is not listed as a file type (.jpg and .dng and a host of other file types are listed). How can I change the association if I cannot find the file type? (BTW: I have changed the file type association in Windows Explorer; I am running Windows XP.) I know I can open PS CS5 manually and scroll to the image I want to open but, to my mind, that defeats one of the main purposes of Bridge.
View 2 Replies
View Related
May 1, 2013
When opened, PS CS6 generates a "Could not complete your request because of a program error" dialog. I click OK and the program runs. However, File>Automate>PhotoMerge generates Error 8800 with reference to Line: 1085 --> if ((app.systemInformation.search(/PhotomergeUI/) < 0
I delete the program, reload from Cloud and it runs OK until update the program via cloud services. Repeat above error sequence.
View 1 Replies
View Related
Nov 8, 2012
i can visualize a PSD or AI from Windows without opening the program?
WINDOWS 7
PHOTOSHOP CS6
View 1 Replies
View Related
Jul 8, 2013
I have Windows 7 64 pro installed. Tried the CC on Windows 8 64bit pro and they didn't play well together. Windows 7 seems to work fine. Good enough. So, I have the 64 bit version of PS CC pinned to the taskbar. When I click on it, it opens right up. Then if I go to Lightroom 5 and open a file, it opens right up in Photoshop CC 64 bit. However, if PS is not open and I open a file from lightroom, Photoshop CC 32bit opens. Not what I want.
Ok, so you say go the defaults menu and change the default opening program? Doesn't work. Switches right back to CC 32bit.
View 4 Replies
View Related
Nov 11, 2008
I tried reinstalling, uninstalling, reinstalling, updating the graphics driver...
View 1 Replies
View Related
Jan 22, 2013
The file are created in AutoCAD 2007.It is a drawing with 2D and 3D drawing in it.When I open this file in my AutoCAD2013 and make the recovery as AutoCAD suggest.
The are no 3D left in the drawing. The file are working fine and whiteout no plebes I AutoCAD2007
System:
Autodesk Product Design Suite Ultimate 2013
AutoCAD Mechanical 2013
View 2 Replies
View Related
Oct 30, 2012
I have reinstalled this program 3 times arlready and the Auto Music feature still does not work? Every time i make a project and want to add some music off the Auto Music feature the whole program crashes instantly? I keep getting over and over again, Unspecified Error? Everything thing else works in the program except the Auto Music.
View 2 Replies
View Related
Nov 18, 2012
So I just downloaded and ran the updates for lightroom 3 (now 3.6) and now when I open folders to view my picture files, the canon raw files are no longer associated with lightroom. Let me further explain.
After shooting, I would plug my card into a card reader and see which pictures I wanted to view in lightroom. I shoot in jpeg and raw so I could view the jpeg thumbnails to see which raw files I wanted to open in lightroom. The raw files would be "labeled" with the LR icon and I would then doulbe click the raw file I wanted and by doing so it would initiate the opeing of LR. However, now the raw files do not have the LR icon assocaited with the raw files and I can longer clcik the raw files to automatically open lightroom.
Did something change with the update?
View 2 Replies
View Related
