CorelDRAW X4 :: File Recovery Dialog Box?
Oct 27, 2013
I was subject to a 10 minute power outage and lost the computer. when power returned, I tried to recover my corelDraw X4 file. No Luck. Inspite of the "backup" being scheduled every 5 minutes. the one backup file was 1 hour old. The documentation said that the CorelDraw system stored a recovery file elsewhere and that I should go to the "File Recovery Dialog Box and "Click" the recovery file. Where is this "File Recovery Dialog Box" ?
View 11 Replies
ADVERTISEMENT
Nov 16, 2011
Had a crash eariler today and saved the A.R.M. file through the dialog box. Where again does it save to or what file type is it? I've searched the Corel Program folder but don't see it, isn't it in the user folder or some temp folder for CorelDraw?
View 2 Replies
View Related
Sep 11, 2012
After finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
View 14 Replies
View Related
Jan 5, 2012
CorelDraw X5 (German Version 15.0.2.0695):I've installed Corel X5 under Windows 7 Ultimate 64 Bit.
When I try to set up my ppd-file in the printer dialog window, I can chose the ppd-file but the OK-button (öffnen) doesn't work. Clicking by mouse or by Enter button at the keyboard: nothing happens, the ppd-file won't be accepted. It seams the OK-button is out of any function in this window.
View 2 Replies
View Related
Feb 4, 2012
When exporting a file to jpeg the dialog box that normally appears and lets you select the quality of the jpeg is not popping up but the files saves but I now have no options in saving the file.
View 7 Replies
View Related
Aug 7, 2012
Background: I work IT here at a trophy shop and we do a lot of artwork for plaques and acrylic/glass awards. I am versed in IT but not CorelDraw in-particular.
Problem: One artist tells me that her CorelDraw seems to randomly crash and display "Recovery manager wizard" "Application has become unstable" and after files are saved the application closes out.
View 1 Replies
View Related
Dec 31, 2012
Is there anyway to recover a PSD file in CS5.1, once it's been saved in another format and resized?
View 2 Replies
View Related
Nov 22, 2013
when I open my revit file, I got the following information.
once I close the up diagram, revit diliver the next message.
View 3 Replies
View Related
May 15, 2013
So my time has come and I have just been bitten by the Illegal Operand failure upon opening a document. The doc was created in AiCS3 but I'm trying to follow the recovery procedure in AiCS6, described here: URL>....The problem is that at step 3 when I'm holding down the three keys, and hitting Open, Windows 7 is triggering the country suffix behavior and appends the country code to the selected file name, in my case - .pl. This makes my file selection invalid (myfile.ai.pl). I guess this comes from a web browser (I have almost all of them installed).
What lead the file to corruption was the spiral tool. WHen I drew the shape, all of a sudden the entire pasteboard (usually filled with dense, tiny checkerboard pattern) got filled with the stroke or fill color. I saved the file and that was it.
View 12 Replies
View Related
Nov 22, 2013
i accidentally Shift+Del a folder with my AEP's in it. i used a data recovery program to recover those files. now when trying to open them i get this error:
Unable to import file "..." as project (bad format or not readable)i kind of got my hopes up while using the recovery program, can this error be worked around or is the file stuffed ?
View 1 Replies
View Related
Jan 22, 2013
The file are created in AutoCAD 2007.It is a drawing with 2D and 3D drawing in it.When I open this file in my AutoCAD2013 and make the recovery as AutoCAD suggest.
The are no 3D left in the drawing. The file are working fine and whiteout no plebes I AutoCAD2007
System:
Autodesk Product Design Suite Ultimate 2013
AutoCAD Mechanical 2013
View 2 Replies
View Related
Mar 7, 2012
Had a system crash. I had Norton 360 using a slave HD as my automatic backup source. To reinstall windows, master HD was overwritten. I thenfound out Norton 360 didn't save my autocad files to the slave HD. Their definition of "other files" didn't cover dwg files unless you did an extremely detailed setup process, which, was not in the Norton instructions. Anyways, local computer service was able to recover about 60% of the "lost" autocad files.
Of those recovered files, about 60% will not open up. Only get a message "not a valid file" The file details show its an autocad file, its size, and the last date of revison.
View 1 Replies
View Related
Apr 12, 2013
I have successfully saved my file, shut down Photoshop without incident, and yet upon opening CS6 it starts opening the latest autorecovery file. I need to have autorecovery on for the work loss protection it provides, but it can get confusing to have an Autorecovery file open instead of the file I had meant to open. ( This is also happening on a colleague's computer.)
I'm running Mac OS X version 10.8.3
2x2.66 GHz 6-Core Intel Xeon
64 GB 1333 MHz DDR3
CS6 Version 13.0.4
It's happened several times with a variety of files. They are all Grayscale layered PSB's, in the 1.5 - 3 GB range.
View 2 Replies
View Related
Apr 24, 2013
I'm using Autocad Civil3D 2011, Version 3. Just yesterday I noticed that the file date shown in Autocad's open file dialog box shows an earlier time than Windows Explorer, which shows the file date and time correctly. When I enter the "time" command on the autocad command line, the correct time is shown for the "last updated" time.
For example:
The Autocad open file dialog box shows the file having a time/date of 4/23/2013 3:54 PM
Windows Explorer shows the file having a time/date of 4/23/2013 4:10 PM
"TIME" command at autocad prompt returns the following:
Current time: Wednesday, April 24, 2013 3:55:35:454 PM
Times for this drawing:
Created: Thursday, March 27, 2008 5:49:57:104 PM
Last updated: Tuesday, April 23, 2013 4:10:56:299 PM
Total editing time: 17 days 15:31:26:967
Elapsed timer (on): 17 days 15:31:26:967
Next automatic save in: 0 days 00:09:58:237
I rebooted and restarted autocad, and resaved my file with the same results (although with different times-but again the autocad open file dialog box showed an incorrect, earlier time). I have never had this problem before, and it is driving me crazy as I usually sort my files by date to assure that I am working with the latest file.
View 4 Replies
View Related
May 24, 2013
I'm using the file dialog snippet as the foundation for a save as dialog box for saving a new copy of my template assembly to a project folder. Is there a way to disable the ability to click on a file in the window which puts that filename in the input box? The assembly file name is standardized and pre-"calculated" by my code and its a decent hassle if you accidentally click another file because the user would either have to rewrite the file name by hand, or cancel out of the dialog box and re-navigate to the project folder.
Inventor 2013 SP 1.1
View 1 Replies
View Related
Jul 31, 2012
When I go to the file open dialog box and start typing in a file name the the file name box it does not show a list of drawings that match the search in the file name box.
View 9 Replies
View Related
Apr 6, 2012
First, I am developing with the following system environment.
- ObjectARX 2011
- AutoCAD 2010
- C# with VS 2008
I am making a custom command that opens a open file dialog to prompt the user a dwg file.And the programmatically(automatically) insert another dwg file to the opened map.So what I tried to find a method to open a open file dialog, but couldn't find it.So next I tried to execute "OPEN" command programmatically. The following code is what I tried...
Application.DocumentManager.MdiActiveDocument.SendStringToExecute("OPEN", false, false, false);
and changing the second parameter to true...
Application.DocumentManager.MdiActiveDocument.SendStringToExecute("OPEN", true, false, false);
When I run the custom command, nothing happens. After opening a file, I want to insert ("INSERT" command) another drawing onto it. How could I achieve this?
View 5 Replies
View Related
Sep 29, 2011
Open a new document, file, import, click on the file filter type near the bottom right corner. The filter list begins with PPT (Powerpoint) and ends with XLS (Excel). There are 28 other file types between those two, all in alphabetical order from P to X.
All the file types from A to P are missing.
If I go to tools, customization, global, filters, in the list of active filters, they're all there (apprx. 60).
View 1 Replies
View Related
Mar 7, 2010
Patch or apply the free version of big options dialog to x5.
View 3 Replies
View Related
Sep 16, 2012
I don't find "All Formats" on the open dialog.
View 4 Replies
View Related
Jun 16, 2011
I have been using Corel x4 for sometime now and export many graphics. Everything works fine just like before but now on I would say 70-80% of my files when I go to export said file it will take up to 8 seconds for the Convert to Bitmap box to come up. I also have always had the "do not show the filter dialog" checked. Everything else within Corel and my PC is working at the same pace as always.
View 3 Replies
View Related
Nov 5, 2012
I just switched from X5 to X6 and cannot figure out how to get align and distribute the way it did in X5 as a floating dialog box. Whenever I open it, it a docker and totally different. I'm used to the way it was in X5.
View 13 Replies
View Related
Aug 21, 2013
I want to open CorelDraw's "Edit Text" Dialog with a Macro Button. How do i assign this dialog to open with my button?
View 4 Replies
View Related
Apr 12, 2012
Transitioning to CD X6 while try to get work done is a chore. I just loaded the real CD X6 box version. It deleted the downloaded test version. But now I made a new poster and I am using Ctrl-E to export it and there is no Export Dialog box. It just saves the JPG in what it thinks I need!! How do I get the Export Dialog box back to control the parameters of my Export?
View 1 Replies
View Related
Aug 5, 2011
Noticed the mis-alignment that occurs in some of Corel's dialog boxes? For example in the New Document dislogs (both Draw and Photo Paint). The Draw dialog looks like this on my machine:
Notice how the labels are out of line with the dialog controls - e.g. the label "Preview Mode" is much higher than the drop-down list it belongs to - way out of alignment. Also, notice how the 'Height' and 'Width' spinners cut off the second 'm'. It's the same situation with Photo Paint too.I mention this because in the Scott Georgeson Video Tutorials, his New Document dialog boxes are not misaligned
View 9 Replies
View Related
Feb 6, 2013
I am having an issue with X6 installed on my laptop. When I try to save, the dialog pops up and flashes at a high rate and seems to be continually re-sizing. The only remedy seems to be to kill the process and lose the work. I am running Windows 7 Home Premium service pack 1 (32-bit) and release 16.2.0.998 of Corel Draw. This is not the demo version, it is a purchased license.
View 1 Replies
View Related
Apr 14, 2010
We have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
View 11 Replies
View Related
Apr 7, 2012
currently getting by with v11 on winXP..Having a recent problem which I hope one of you can identify. I undoubtedly caused this problem myself by while trying to set up multiple monitors with different screen resolutions, dpi's, font viewing sizes, etc... but now I don't know exactly what setting caused it or how to get back to normal.
Here's the problem - two dialog boxes are displaying very skewed as shown in the screen-shots below. It's only these two dialogs I seem to have trouble with. It's like their popup windows are wrong proportions. No settings I change in my monitor setups seem to correct the situation.
View 3 Replies
View Related
Jan 22, 2011
I am exporting graphics to TIF format and it needs to be exact same as in document, RGB code. I found out that if I uncheck the "Embed Color profile" it exports correctly with exact color codes as in Corel. However, sometimes I have found out that I have forgotten to uncheck that little box..
So I would prefer to have it unchecked by default. How would I do it?
I opened filters.ini and found the TIFF section, but I don't really understand anything there.
View 2 Replies
View Related
Apr 4, 2011
I print spot color separations using CorelDraw a lot. Just ungraded from X3 to X5. One problem I am having is in the printing dialog. When a file has, say, 4 colors showing up in the separations section I may only want to print 2 or three of them. I deselect the ones I don't want - but all 4 seps come out. I am wasting a lot of expensive separations.
View 3 Replies
View Related
Dec 3, 2012
How do I go about saving the settings on the open dialog box? It keeps moving to different locations and it keeps changing the Name / Date modified / Type / Size columns very narrow where it only shows the name and nothing else.
I do have the dialog box very large across so it can accommodate what I want including the preview.
View 3 Replies
View Related
