Open a new document, file, import, click on the file filter type near the bottom right corner. The filter list begins with PPT (Powerpoint) and ends with XLS (Excel). There are 28 other file types between those two, all in alphabetical order from P to X.
All the file types from A to P are missing.
If I go to tools, customization, global, filters, in the list of active filters, they're all there (apprx. 60).
How can i assign a shortcut key in corel, this Application. On Key "^b, DownArrow", "Macro" runs in excel. But not on Corel.
View 2 Replies View RelatedI need a short key for Invert I've searched for in the customizations but cannot find it. And alse a short key of "Add page frame" too
The only absolute knowledge attainable by man is that life is meaningless.
I've used Lightroom 5.2 RC for a few weeks and successfully imported a few times. This morning, however, the dialog will not come up and the program hangs until I kill it in Task Manager. This is in Windows 8 64-bit.
I've tried removing the memory card, and all other USB-connected devices, but it still hangs. I'm a developer and can supply crash dumps if necessary.
I am SO TIRED of having to unplug every single peripheral device attached to my computer before opening the Import dialog box in Lightroom to keep it from taking forever to access local drives due to auto scanning!
Why can we not turn that OFF in preferences? Why is it on in the first place? Lightroom should not scan a folder to generate thumbnails in the Import dialog box until a Source folder is manually specified! In fact, you should be able to Import without any thumbnails in the view at all if you choose.
Any way to force Lightroom to behave this way?
I have struggled with various settings of the Interface under Preferences, but the import dialog in Lightroom 3.* is so dark/low contrast as to be almost invisible. I have to really strain to read it.
The "dim level" control doesn't work nor does using "light grey" or "white" backhground. I'm using pretty common, calibrated monitors and the problem is not just on one computer.
I just installed Lightroom 5 and the import dialog box is not showing the previews of the images. Without the previews, there are no images to select for importing. It doesn't matter if they are JPG or CR2 and if I try to import from the camera card or hard drive. Version 4.4 also failed at first but after hacking away, I finally got the older version to work.
I am using Lightroom 5, Windows 7 64 bit.
Since I upgraded to Lightroom 4.1 from 3 the Import Dialog screen will not auto open when I insert a memory Cart to my Imac. I have the correct box ticked in the preferences.
View 4 Replies View RelatedIs there anyway possible to view capture time instead of filename on the thumbnails in the import dialog?
In the normal gridview it is possible to change to a lot of diffrent info so it would be great if I could do the same thing in gridview in import dialog.
The info is there since I can hover to se the date but it would be a lot faster if it could be visible directly.
When importing files from a compact flash card (Windows 7, Lightroom 3 final) my "move" option is greyed out, and so I can only copy or add the files during the import. I want to move them so they are deleted from my CF card after the import
View 15 Replies View RelatedI know in the past Premiere Pro wouldn't import a layered AI file, but is that still the case? I can get a layered PSD file to import layers as normal. When I try to import a layered AI file, I don't get the "Import Layered File" dialog as I do with the PSD files; I get a flattened image. Is this a setting I've overlooked or is this STILL not a feature?
View 2 Replies View RelatedI am trying to import a LandXML surface into my project. However, when I click the "LandXML" button in the "Import" tab, absolutely nothing happens. The command _AeccLandXMLIn appears in the command line, but there is no dialog box and no further action from Civil3D. How I can get this to work?
I ran into a similar problem with the normal "Open File" dialog box, and had to run a FILEDIA command to turn that dialog box back on. Is there a command like that to turn on and off the Import LandXML dialog box?
When I import files from the M Monochrom there are no actual previews in the import dialog window. Also LR4 does not indicate the aperture used in either the library or develop module.
View 13 Replies View RelatedLR3.6 started to fail to Syncronize folders. It also doesn't show only NEW photos on Importing fron hard drive, as it always has.
When I choose not to "show Import dialog" while synchronising a folder, it shows the correct number of new photos in a folder. But when the import starts there's a blank field and nothing happens. This can last for a whole day. Here is a screenshot.
The second problem is with Import.
When I start "Import" or mark "Show import dialog before importing" in syncing a folder it shows me all the photos, despite I choose "Add", "New Photos" and "Don't Import Suscected Duplicates".
I havent changed any preferances, it all just started to happen lately.
I'm using Raw Photo Processor plug-in for external developing, I thougt this might be the cause, but I've been using it for a long time, and the problems started several days ago.
When I import pictures from my SD Card I usually leave copies on the card for a while so I have them as backup, and to also be able to see recent pics on my camera. However each time I go to import pictures from that card within LR, it defaults to selecting all pics on my SD card even though I have the "New Photos" filter selected at the top of the import box. It always puts all my photos in the "New Photos" section, so I have to deselect all the photos that I have already imported into my catalogue so I don't get duplicates. How do I get LR to only import pics that haven't been imported bfore?
I am aware of the "Don't Import Suspected Duplicates" option, but that is not the samea as what I am looking for. It only deselects photos that still exist in my catalogue. Any photos that I have deleted from my catalogue remain selected in the import box as it doesn't see any duplicates.
what I'm missing to have LR only select photos that haven't been previously imported from that card?
Try to navigate into a NFS drive inside the import dialog. It does not work anymore.
View 2 Replies View RelatedLightroom 5.0 fails to detect memory card and open import dialog. This has always worked fine in Lightroom 4, 3,and 2. Same cards, same camera, same iMac using OS X 10.8.4. Manual importing works OK, card is detected just fine.
View 14 Replies View RelatedHow do I prevent Lightroom to auto-start after introducing an USB-stick or otherwise in my computer? I want to start when I need it.
View 2 Replies View RelatedI was subject to a 10 minute power outage and lost the computer. when power returned, I tried to recover my corelDraw X4 file. No Luck. Inspite of the "backup" being scheduled every 5 minutes. the one backup file was 1 hour old. The documentation said that the CorelDraw system stored a recovery file elsewhere and that I should go to the "File Recovery Dialog Box and "Click" the recovery file. Where is this "File Recovery Dialog Box" ?
View 11 Replies View RelatedPatch or apply the free version of big options dialog to x5.
View 3 Replies View RelatedI don't find "All Formats" on the open dialog.
View 4 Replies View RelatedI have been using Corel x4 for sometime now and export many graphics. Everything works fine just like before but now on I would say 70-80% of my files when I go to export said file it will take up to 8 seconds for the Convert to Bitmap box to come up. I also have always had the "do not show the filter dialog" checked. Everything else within Corel and my PC is working at the same pace as always.
View 3 Replies View RelatedI just switched from X5 to X6 and cannot figure out how to get align and distribute the way it did in X5 as a floating dialog box. Whenever I open it, it a docker and totally different. I'm used to the way it was in X5.
View 13 Replies View RelatedI want to open CorelDraw's "Edit Text" Dialog with a Macro Button. How do i assign this dialog to open with my button?
View 4 Replies View RelatedTransitioning to CD X6 while try to get work done is a chore. I just loaded the real CD X6 box version. It deleted the downloaded test version. But now I made a new poster and I am using Ctrl-E to export it and there is no Export Dialog box. It just saves the JPG in what it thinks I need!! How do I get the Export Dialog box back to control the parameters of my Export?
View 1 Replies View RelatedNoticed the mis-alignment that occurs in some of Corel's dialog boxes? For example in the New Document dislogs (both Draw and Photo Paint). The Draw dialog looks like this on my machine:
Notice how the labels are out of line with the dialog controls - e.g. the label "Preview Mode" is much higher than the drop-down list it belongs to - way out of alignment. Also, notice how the 'Height' and 'Width' spinners cut off the second 'm'. It's the same situation with Photo Paint too.I mention this because in the Scott Georgeson Video Tutorials, his New Document dialog boxes are not misaligned
I am having an issue with X6 installed on my laptop. When I try to save, the dialog pops up and flashes at a high rate and seems to be continually re-sizing. The only remedy seems to be to kill the process and lose the work. I am running Windows 7 Home Premium service pack 1 (32-bit) and release 16.2.0.998 of Corel Draw. This is not the demo version, it is a purchased license.
View 1 Replies View RelatedWe have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
currently getting by with v11 on winXP..Having a recent problem which I hope one of you can identify. I undoubtedly caused this problem myself by while trying to set up multiple monitors with different screen resolutions, dpi's, font viewing sizes, etc... but now I don't know exactly what setting caused it or how to get back to normal.
Here's the problem - two dialog boxes are displaying very skewed as shown in the screen-shots below. It's only these two dialogs I seem to have trouble with. It's like their popup windows are wrong proportions. No settings I change in my monitor setups seem to correct the situation.
CorelDraw X5 (German Version 15.0.2.0695):I've installed Corel X5 under Windows 7 Ultimate 64 Bit.
When I try to set up my ppd-file in the printer dialog window, I can chose the ppd-file but the OK-button (öffnen) doesn't work. Clicking by mouse or by Enter button at the keyboard: nothing happens, the ppd-file won't be accepted. It seams the OK-button is out of any function in this window.
I am exporting graphics to TIF format and it needs to be exact same as in document, RGB code. I found out that if I uncheck the "Embed Color profile" it exports correctly with exact color codes as in Corel. However, sometimes I have found out that I have forgotten to uncheck that little box..
So I would prefer to have it unchecked by default. How would I do it?
I opened filters.ini and found the TIFF section, but I don't really understand anything there.