AutoCAD Civil 3D :: Import LandXML Dialog Box Does Not Open
Oct 9, 2012
I am trying to import a LandXML surface into my project. However, when I click the "LandXML" button in the "Import" tab, absolutely nothing happens. The command _AeccLandXMLIn appears in the command line, but there is no dialog box and no further action from Civil3D. How I can get this to work?
I ran into a similar problem with the normal "Open File" dialog box, and had to run a FILEDIA command to turn that dialog box back on. Is there a command like that to turn on and off the Import LandXML dialog box?
View 2 Replies
ADVERTISEMENT
Aug 27, 2013
Well I have a LandXML and I import the file into the SDB, it gives me line work but only Station Setups. I have no turned angles or points short of the Occupation Points. What is going on here. I have tested this in C3D12 on one PC C3D13 & 14 on another PC and have the same issue. However a co-worker imports to a student version of 12 using my template and gets points and lines.
View 8 Replies
View Related
Jul 6, 2012
I am using Civil 3d 2011 and i have about 200 landxml files that I need to import into my drawing. Is there an easier way of doing this besides importing them one at a time?
View 1 Replies
View Related
Jul 2, 2012
Since I upgraded to Lightroom 4.1 from 3 the Import Dialog screen will not auto open when I insert a memory Cart to my Imac. I have the correct box ticked in the preferences.
View 4 Replies
View Related
Aug 28, 2013
When I click on formula cell (on QTO manager) C3D ask me for a name & path for the formula file. Ok.
I would expect the formula editor dialog box but I see nothing ...
If a do click or couble click I have the same peticion "Choose a file for formula".....
Civil 3D (2013)
View 3 Replies
View Related
Apr 13, 2008
Getting odd results when importing pipe networks from StormCad v.8 via LandXML? I'm using the stand-alone version for C3D 2008. It always puts the outlet gound elevation at zero. Sometimes it puts the pipe centerline elevations at the rim elevations of the structures. Sometimes it reverses the pipes on their own centerline, causing really weird results.
I have opened every XMLfile with XML Notepad and checked that the data that came out of StormCad is correct. But something in the translation back to C3D 2008 goes haywire. I love C3D, if only I could be more confident of importing pipe data.
View 2 Replies
View Related
Jul 27, 2012
I exported my pipes from c3d 2013 to SSA 2013 but when I export them back to c3d via landxml the pipe network falls in wrong coordinates too far from my project area. same problem appears in c3d 2012
Civil 3D 2013 64bit SP1
Elitebook 8540w
Core i7 2.8GHz, 8Gig RAM
NVIDIA Quadro FX880
160Gb SSD
View 3 Replies
View Related
Jun 16, 2013
Lightroom 5.0 fails to detect memory card and open import dialog. This has always worked fine in Lightroom 4, 3,and 2. Same cards, same camera, same iMac using OS X 10.8.4. Manual importing works OK, card is detected just fine.
View 14 Replies
View Related
Sep 19, 2012
Is it possible to edit a surface imported from LandXML with additional survey information (points and figures)? I would assume the tin could be edited and the new data included in the surface.
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 1 Replies
View Related
Apr 17, 2012
I have not installed 2013 yet, and was wondering if you are able to Export to LandXML. And if you can, is previous version able to import that LandXML file?
View 2 Replies
View Related
Oct 7, 2013
Every time that I open a new drawing and select the path, open file dialog appears empty and If I click "ok" button, then appears the following message:
I´m using Civil 3D 2014+hotfix1.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
View 3 Replies
View Related
May 8, 2012
We are using Civil 3d 2012 with Topcon Data Collectors. Topcon will not read a profile created by using "create surface profile" command but it will read a profile using "Profile Creation Tools" command. We are not sure if this a civil 3D, Topcon or a LandXML issue?
View 1 Replies
View Related
Jun 8, 2012
I've created a surface into Civil3D by importing a LandXML file created from contours in a .dgn file. When I create profile views for the alignments, the elevations are shown negative (-500 to -20) where as they have to be in between 500 to 670. Also when I run the surface elevation analysis, all the elevation are shown in between 1000 to 2200 inches as shown in the figure attached.
Am I missing any conversion or some settings when importing the surface.
Windows 7 x 64
Nvidia Quadro 2000
24 GB Ram
i7 960 @ 3.20 GHz
Civil 3D 2012
View 6 Replies
View Related
Jul 10, 2013
I have created a surface and have exported it to LandXML for import into another software. After generation of the surface, I have cleaned up the surface triangles to eliminate triangulation outside of the area of interest. I have tried this both with deleting actual surface lines and by applying a boundary. After I edit the surface, I export it as a LandXML and bring it into my application where the surface still has the lines outside of the area of interest that I wanted deleted.
What I suspect is happening is that C3D is recording that the lines were deleted in the edits section of the surface, but that the actual lines are not deleted from the surface definition. My other software is not smart enough to figure this out from the LandXML file. Is it possible to finalize all the edits in C3D so that upon export my deleted lines do not transfer through?
View 3 Replies
View Related
Sep 28, 2012
Using 2010 Civil3D and trying to use "Reports" to print a point list and I am getting error:
Export LandXML is currently is currently not supporting the following drawing units:
Millimeters, Centimeters, Decimeters, Inches.
I have used the unit command to make sure I am in feet. Niot sure what else to look at.
View 1 Replies
View Related
Mar 4, 2012
I have been outputting surfaces from Civil 3D 2012 using the LandXML export function. Some of the XML files that are output the data is on a single line and some of the outputs are on multiple lines.
Not a major issue as they both import back into C3D ok but within my office we edit the XML file slightly inorder to get it into another software package and require the multi line format.
The only difference I can see is the size of the data used to create the surface! All drawings have the same LandXML export settings..All surfaces have been created using a combination of point groups, breaklines etc..
View 7 Replies
View Related
Mar 21, 2013
We're working on a project which is causing me to question our management "system" (more like lack there-of). There are about 4 Existing Surfaces and 3 Design surfaces, and a half dozen or so drawings needed to show the various elements of this construction project. In the past we've done either copy and paste to show the same surface in different layouts or had a number of layout tabs. (Which quickly get pretty annoying if you're trying to show too much "different stuff" in each layout.
Looking at Data Shortcuts...we've never used them. When we have to make last minute changes everything automatically "updates" right? And the drawings should load faster and crash less because they're not so huge, right? The only Major Drawback I see is this: we use one person's workstation as the server" so two of us refer to the M drive path and one refers to the C drive path. Would this just screw everything up as it does when we have xref images? (Have to relocate the file path every single time the C drive person saves the file in order to see the image) I understand using "relative path" should fix this, but I haven't had much success with it.
And LandXML export/import, what exactly is the difference between this and a Data Shortcut?
View 6 Replies
View Related
Aug 19, 2008
I have a client .dtm generated by Microstation.
I cannot figure out how to open or import a .dtm into Civil 3D.
View 9 Replies
View Related
Apr 24, 2013
I'm using Autocad Civil3D 2011, Version 3. Just yesterday I noticed that the file date shown in Autocad's open file dialog box shows an earlier time than Windows Explorer, which shows the file date and time correctly. When I enter the "time" command on the autocad command line, the correct time is shown for the "last updated" time.
For example:
The Autocad open file dialog box shows the file having a time/date of 4/23/2013 3:54 PM
Windows Explorer shows the file having a time/date of 4/23/2013 4:10 PM
"TIME" command at autocad prompt returns the following:
Current time: Wednesday, April 24, 2013 3:55:35:454 PM
Times for this drawing:
Created: Thursday, March 27, 2008 5:49:57:104 PM
Last updated: Tuesday, April 23, 2013 4:10:56:299 PM
Total editing time: 17 days 15:31:26:967
Elapsed timer (on): 17 days 15:31:26:967
Next automatic save in: 0 days 00:09:58:237
I rebooted and restarted autocad, and resaved my file with the same results (although with different times-but again the autocad open file dialog box showed an incorrect, earlier time). I have never had this problem before, and it is driving me crazy as I usually sort my files by date to assure that I am working with the latest file.
View 4 Replies
View Related
Oct 31, 2013
When I open the file.psd to edit or file.jpg (Any file type) The program will appear the dialog and then When I click "OK" to close this dialog.After that, it will appear the dialog to close program.
I could not continue to work.I must close and reopen the program. (Do not open the file.)
View 2 Replies
View Related
Aug 4, 2006
Just thought I would post this because I have been looking for a working VBA file open dialog box solution for awhile. I'm an old autolisped making the jump to VBA and I have seen and read various solutons for the equivalent getfiled autolisp function but I never had much luck with them. This one worked for me it uses the Win API to do the job.
Private Declare Function GetOpenFileName Lib "comdlg32.dll" Alias _
"GetOpenFileNameA" (pOpenfilename As OPENFILENAME) As Long
Private Type OPENFILENAME
lStructSize As Long
hwndOwner As Long
[Code] ....
Make a form and place the following code listed below on a button to call the showopen routine.
Private Sub CommandButton1_Click()
Dim Filter As String
Dim InitialDir As String
Dim DialogTitle As String
Dim OutputStr As String
[Code] ......
View 9 Replies
View Related
Mar 18, 2011
I installed architecture 2011 last night. When I installed it, it did not remove my 2008 verison. So all my files are still opening the 2008 verison. I do not have much space on my hard drive, so if I uninstall 2008, will there be a problem with 2011?
Is there any reason to keep the 2008 version?
Second problem: in 2011, I click on the open button and it does not open a dialog box. It only gives me a line in the command line. same thing happens when I try to save as.
View 3 Replies
View Related
Jan 25, 2012
I have a user with AutoCAD LT 2007 SP2. Whenever he clicks on File > Open... the drop-down list to browse to another directory is blank. It doesn't show any local or network drives. He can open files just fine from Windows Explorer.
View 1 Replies
View Related
Sep 18, 2012
I'm having a problem that my file dialog box won't open when I go to open, new or save as. When I hit open, new or save as the command bar wants you to type the file name. My co-worker told me to type CMDDIA and change it to 1. But that didn't work for my error. How to fix my AutoCAD issue. I attached a .jpg of what the command bar looks like when I hit the open button.
View 2 Replies
View Related
Aug 12, 2005
In AutoCad 2006, when I want to open a new or existing drawing or template, instead of regular dialog box I receive only a prompter dialog which is present in the command line also, asking me for the name of the drawing that I want to open; it is the case also when I want to save a drawing too. I already checked the "Options" under the "Open and Save" tab and everything looks to be in order. How can I resolve this bothering problem since I am able to perform the above tasks only accessing "Windows explorer"?
View 9 Replies
View Related
Jun 4, 2013
My AutoCAD (2013) don't shows the preview in open dialog. I read something about edit a value in Regedit, but I don't have access to Regedit. Has other way to fix it?
View 5 Replies
View Related
Jan 11, 2013
In AutoCAD 2012 when the File Open Dialog Box is displayed there is a drop down option list called Views and the option at the bottom is Preview. That's the same in both the English and German versions of AutoCAD, other than in German its called Vorschau. When the option is ticked (checked) a preview is displayed, if it is not ticked then no preview is displayed.
In AutoCAD 2013 this option for Preview does not exist because the Preview is always there.
OK, how do you see this in your version of AutoCAD 2013. Who sees the preview and who not?
Or, is there a setting somewhere that controls the visibility of the preview. I don't know, but I would like to know.
Or, is there a setting somewhere that controls the visibility of the preview. I don't know, but I would like to know.
View 8 Replies
View Related
Dec 17, 2013
Is it possible to open the iProperties dialog from the api for a specified document, not necessarily the active document.
View 3 Replies
View Related
Mar 8, 2013
running on Windows 7 is seeing files categorized in his Inventor Routed Systems Open dialog categorized by:
Today
Yesterday
Last Week
Last Month
He doesn't recall it always being like that (and I've never seen it on any system I've used).
When he opens a Word file, those files are not categorized that way.If he switches to "List" he just gets all files but he doesn't get the detail he wants if he were using "Detail".
Inventor Product Design Suite 2013sp2
Windows 7sp1 64-bit
nVidia Quadro 2000
View 1 Replies
View Related
Mar 19, 2013
I am difficulty getting the options dialog box to open (under the file menu "red A" dropdown list, options button). When I click on it, all of the buttons on top go gray and nothing appears. When I click on the black workspace, I get a compluter bell sound.
What I've tried to do to solve the problem is restart the computer and shutdown the computer.
View 2 Replies
View Related
May 16, 2012
I'm using Autocad 2013, and the Open File Dialog Box has disappeared. Every time I try to open a drawing, it defaults to the command line. I have the same error with Image Attach. It's only my user. Other Users on the computer do not have this issue. Settings to change it.
View 5 Replies
View Related
