AutoCAD Civil 3D :: Export SSA To 2013 Via (LandXML)?

Jul 27, 2012

I exported my pipes from c3d 2013 to SSA 2013 but when I export them back to c3d via landxml the pipe network falls in wrong coordinates too far from my project area. same problem appears in c3d 2012

Civil 3D 2013 64bit SP1
Elitebook 8540w
Core i7 2.8GHz, 8Gig RAM
NVIDIA Quadro FX880
160Gb SSD

View 3 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Will Pressure Pipes Export To LandXML

Apr 17, 2012

I have not installed 2013 yet, and was wondering if you are able to Export to LandXML. And if you can, is previous version able to import that LandXML file?

View 2 Replies View Related

AutoCAD Civil 3D :: Export To LandXML From Create Surface Profile

May 8, 2012

We are using Civil 3d 2012 with Topcon Data Collectors.  Topcon will not read a profile created by using "create surface profile" command but it will read a profile using "Profile Creation Tools" command. We are not sure if this a civil 3D, Topcon or a LandXML issue? 

View 1 Replies View Related

AutoCAD Civil 3D :: LandXML Export - Deleted Lines Retained

Jul 10, 2013

I have created a surface and have exported it to LandXML for import into another software.  After generation of the surface, I have cleaned up the surface triangles to eliminate triangulation outside of the area of interest.  I have tried this both with deleting actual surface lines and by applying a boundary.  After I edit the surface, I export it as a LandXML and bring it into my application where the surface still has the lines outside of the area of interest that I wanted deleted.

What I suspect is happening is that C3D is recording that the lines were deleted in the edits section of the surface, but that the actual lines are not deleted from the surface definition.  My other software is not smart enough to figure this out from the LandXML file.  Is it possible to finalize all the edits in C3D so that upon export my deleted lines do not transfer through?

View 3 Replies View Related

AutoCAD Civil 3D :: Export LandXML Error - Printing Point List

Sep 28, 2012

Using 2010 Civil3D and trying to use "Reports" to print a point list and I am getting error:

Export LandXML is currently is currently not supporting the following drawing units:

Millimeters, Centimeters, Decimeters, Inches.

I have used the unit command to make sure I am in feet.  Niot sure what else to look at.

View 1 Replies View Related

AutoCAD Civil 3D :: Importing LandXML From StormCad?

Apr 13, 2008

Getting odd results when importing pipe networks from StormCad v.8 via LandXML? I'm using the stand-alone version for C3D 2008. It always puts the outlet gound elevation at zero. Sometimes it puts the pipe centerline elevations at the rim elevations of the structures. Sometimes it reverses the pipes on their own centerline, causing really weird results.

I have opened every XMLfile with XML Notepad and checked that the data that came out of StormCad is correct. But something in the translation back to C3D 2008 goes haywire. I love C3D, if only I could be more confident of importing pipe data.

View 2 Replies View Related

AutoCAD Civil 3D :: LandXML Import - Survey Database

Aug 27, 2013

Well I have a LandXML and I import the file into the SDB, it gives me line work but only Station Setups. I have no turned angles or points short of the Occupation Points. What is going on here. I have tested this in C3D12 on one PC C3D13 & 14 on another PC and have the same issue. However a co-worker imports to a student version of 12 using my template and gets points and lines.

View 8 Replies View Related

AutoCAD Civil 3D :: Import LandXML Dialog Box Does Not Open

Oct 9, 2012

I am trying to import a LandXML surface into my project.  However, when I click the "LandXML" button in the "Import" tab, absolutely nothing happens.  The command _AeccLandXMLIn appears in the command line, but there is no dialog box and no further action from Civil3D. How I can get this to work? 

I ran into a similar problem with the normal "Open File" dialog box, and had to run a FILEDIA command to turn that dialog box back on.  Is there a command like that to turn on and off the Import LandXML dialog box?

View 2 Replies View Related

AutoCAD Civil 3D :: Import Multi LandXML Files?

Jul 6, 2012

I am using Civil 3d 2011 and i have about 200 landxml files that I need to import into my drawing. Is there an easier way of doing this besides importing them one at a time?

View 1 Replies View Related

AutoCAD Civil 3D :: Edit Surface Imported From LandXML?

Sep 19, 2012

Is it possible to edit a surface imported from LandXML with additional survey information (points and figures)?  I would assume the tin could be edited and the new data included in the surface.

C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM

View 1 Replies View Related

AutoCAD Civil 3D :: Create Surface From LandXML - Negative Elevations?

Jun 8, 2012

I've created a surface into Civil3D by importing a LandXML file created from contours in a .dgn file.  When I create profile views for the alignments, the elevations are shown negative (-500 to -20) where as they have to be in between 500 to 670. Also when I run the surface elevation analysis, all the elevation are shown in between 1000 to 2200 inches as shown in the figure attached.

Am I missing any conversion or some settings when importing the surface. 

Windows 7 x 64
Nvidia Quadro 2000
24 GB Ram
i7 960 @ 3.20 GHz
Civil 3D 2012

View 6 Replies View Related

AutoCAD Civil 3D :: Different LandXML Format Outputs - Multiline And Single Line?

Mar 4, 2012

I have been outputting surfaces from Civil 3D 2012 using the LandXML export function. Some of the XML files that are output the data is on a single line and some of the outputs are on multiple lines.

Not a major issue as they both import back into C3D ok but within my office we edit the XML file slightly inorder to get it into another software package and require the multi line format.

The only difference I can see is the size of the data used to create the surface! All drawings have the same LandXML export settings..All surfaces have been created using a combination of point groups, breaklines etc..

View 7 Replies View Related

AutoCAD Civil 3D :: Data Shortcuts Versus LandXML / Copy And Paste

Mar 21, 2013

We're working on a project which is causing me to question our management  "system" (more like lack there-of). There are about 4 Existing Surfaces and 3 Design surfaces, and a half dozen or so drawings needed to show the various elements of this construction project. In the past we've done either copy and paste to show the same surface in different layouts or had a number of layout tabs. (Which quickly get pretty annoying if you're trying to show too much "different stuff" in each layout.

Looking at Data Shortcuts...we've never used them. When we have to make last minute changes everything automatically "updates" right? And the drawings should load faster and crash less because they're not so huge, right? The only Major Drawback I see is this: we use one person's workstation as the server" so two of us refer to the M drive path and one refers to the C drive path. Would this just screw everything up as it does when we have xref images? (Have to relocate the file path every single time the C drive person saves the file in order to see the image) I understand using "relative path" should fix this, but I haven't had much success with it.

And LandXML export/import, what exactly is the difference between this and a Data Shortcut?

View 6 Replies View Related

AutoCAD Civil 3D :: 2013 Crashing On Export To CAD When Pipes In Profile View

Jan 10, 2013

So I have been getting a fatal error "INTERNAL ERROR: !dbobji.cpp@8743: eNotOpenForWrite" when I try to export to 2010 CAD.

I have worked out that it happens when pipes are displayed in the profile view.

View 7 Replies View Related

AutoCAD Civil 3D :: Export Alignment Created In 2013 To Google Earth?

Aug 5, 2013

how to import my alignment to google earth so that i can visualize how my alignment goes

as there is no link between google earth and civil 3d 2013

View 9 Replies View Related

AutoCAD Civil 3D :: Exporting Surface Triangles Using Genio Export Extension (2013)

Mar 11, 2013

with the Genio Exporter. I need to export the surface triangles from my job, but the Genio export dialouge box only gives me the option to export suface boundaries.

View 4 Replies View Related

AutoCAD Civil 3D :: Export Created Surface From Civil To Revit Architecture

Dec 17, 2013

Is it possible to export created surface from civil to revit architecture? If yes , How? And if its not possible - maybe i can somehow import cogo points to revit?

View 6 Replies View Related

AutoCAD 2013 :: Export To DNG

Mar 15, 2013

I am trying to exprt a 3D autocad model to dng. "The seed file that you selected is invalid. Select a different seed" There is 1 seed file, the Autocad standard.

Question:

1 - is dng appropriate for exproting 3D dwg models

2 - how to make a proper seed file

View 1 Replies View Related

AutoCAD 2013 :: Export To PDF In Right Scale

Jul 14, 2013

I have a drawings with drawer frame (margins left are 25 mm and rifgt, top and bot margins are 5 mm). I don't know how to export them in pdf in right scale. I always got cut off edges or i see outer line.Drawing example is in attachment i need to print it in a3 paper. Explain me whole process converting drawings to pdf on my drawing.

View 2 Replies View Related

AutoCAD 2013 :: Export Coordinates From DWG Or IGS?

Jan 17, 2013

We are a couple of students just starting at our finale thesis at the university. We got some problems that we can't find a resolution to. 

We are going to use Ultramarine MOSES to simulate a ship. We got the drawings as 2d construction lines (.dwg) and 3d (.igs) of the ship, and need all the coordinates, x,y,z of all lines, to the coding in MOSES.

Our problem is to get these coordinates from autocad. We have tried to open the dwg in autocad and use dataextraction to get the coordinates without any sucess. We have also tried the igs without any sucess there as well.

View 3 Replies View Related

AutoCAD 2013 :: Ctb Export From CAD To Revit?

May 30, 2013

I have my own ctb settings for CAD I need the same in Revit. How I export the ctb settings from CAD to Revit.

View 1 Replies View Related

AutoCAD Architecture :: 2013 Export To Sketchup

Apr 13, 2013

I have model with 3d surfaces created in ACA2013. when I trying export to Sketchup 8 (via 2007 dxf export, 2007 dwg export...), the surfaces is lost. Is there a way to export to SU8 maintaining the surfaces?

View 3 Replies View Related

AutoCAD 2013 :: Export And / Or Publish To DWF 2014

Oct 3, 2013

each attempt to save as or publish / plot to DWF in Autocad 2014 fails (Device not found) other than the device what am i missing?

tried from the Output tab on the ribbon as well as the application icon save as , publish, and plot all with the same result

View 4 Replies View Related

AutoCAD 2013 :: Export Data To CSV Format?

Sep 29, 2013

I have an drawing file which contains 3000points , as i want those to be converted in .csv format,

[URL]

View 9 Replies View Related

AutoCAD 2013 :: How To Export To Paper Layout

Nov 3, 2012

I need moving my drawing from model mode to paper layout.

View 1 Replies View Related

AutoCAD Inventor :: New Install Of 2013 Cannot Export An DWG?

Aug 9, 2012

I have a strange one here. Installed 10 seats of Inventor 2013 on Win 7x64, all but 2 cannot export an AutoCAD DWG. When you go to export the file, clicking on Options does nothing. On the one I have tried a repair install, this did no0t work, I then did an uninstall/reinstall, this fixed it. On the second machine, I was hoping I could get away with copying the dwg export .nin file. This has not worked

View 1 Replies View Related

AutoCAD 2013 :: Embedding Fonts With Export DWG To PDF?

Nov 18, 2013

We have recently started having issues with our sets coming back from the printers. We are using ACA 2013. We us the "Arial" font for all of our noting.

When we need a check set printed we typically send a PDF of the set to our printer for reproduction. Lately I have been using the "export > to pdf" function under the drop down. The problem is, when we view the PDF in our office, it is perfect but when we ship it off to the printer he see's missing letters and open boxes in some areas instead of letters.

I am assuming that this is because the font is being substituted with something else. When I recreate the PDF using the plot command and use the Adobe PDF printer I can uncheck the "Rely on system fonts only, do not use document fonts". This seems to remedy the problem and the printer is able to print and view the PDF just fine.

So, is it possible to set the default settings of whatever the "export to pdf" uses to convert the dwg into a pdf so that is will embed the fonts. There is not an option for that under the Export to DWF/PDF options.

View 2 Replies View Related

AutoCAD Inventor :: 2013 - Export DWG To STEP?

Sep 4, 2013

I am trying to export a dwg to STEP in inventor 2013.

The exprort to STEP tab is greyed out and can't be clicked on.

View 1 Replies View Related

AutoCAD 2013 :: Export To PDF Not Keeping SHX Files

Nov 8, 2013

I created a new line type from a shape file.  When i drew this linetype and then exported the drawing to pdf, I received the error message in the picture.  It said the SHX files are missing, but when I looked in the folder, the SHX files were still there.

When export to pdf completed, I was left with a broken shape shown in the attached pdf.

View 4 Replies View Related

AutoCad :: Layer Import And Export In 2013?

May 30, 2012

i have a layer which i have exported and saved as layer file. now i want to import this layer file in an already existing file. can i know the process.

View 2 Replies View Related

AutoCAD LT :: 2013 Export / Import SHP Files To GIS?

Nov 30, 2012

The company I work for is looking into buying new AutoCAD software due to upgrading computers. We don't use 3D commands at all and are looking into purchasing the LT version for budgeting reasons. What we are trying to find out now is if you can export and import SHP files from GIS ESRI software. Are you able to edit the SHP files if necessary?

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved