I have a drawings with drawer frame (margins left are 25 mm and rifgt, top and bot margins are 5 mm). I don't know how to export them in pdf in right scale. I always got cut off edges or i see outer line.Drawing example is in attachment i need to print it in a3 paper. Explain me whole process converting drawings to pdf on my drawing.
View 2 RepliesI have done this many times in the past, but when I export a dwg (2007 format) to illustrator it opens fine, but it is slightly wrong in scale from the CAD version. I have no clue why this is happening. Also I know illustrator doesn't support CAD layers so everything comes in on one layer which is fine. In Illustrator I am having trouble separating the layer into multiple layers as everything is contained in a clip 'group' not sure what that is either.
View 1 Replies View RelatedI have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
I have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies View RelatedI have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
My units are set to decimal. In acad 2004, the dropdown list showed options like 1"=50' In 2013, it shows options like 1/32"=1'-0" How can I get it to display such as 1"=50' like before?
View 2 Replies View RelatedI am using File>Export Layout to Model... command.
The drawing exported in half scale means a circle with 10mm diameter dimension on it exported as a circle with 5mm diameter But the dimension on the circle remains as 10mm!!!
How does this happen and how can I fix it?
Relating to the printing, could i have a question which i posted in printing box but no response.
Question : Could we use 1 ctb file for all drawings or need to create separate ctb files up to drawing scale?
E.g. we create ctb file for 1:100 but when we use that for details 1:10, 1:5 it's quite light.
We can use scale line weight?
Is there a way in cad 13 to scale vertically only?
View 5 Replies View RelatedIs it possible to insert a scale bar? I have searched all over but the only instruction I got was to click insert scale bar in the annotation pallette, but no such thing exists. Surely this should be easy enough?
View 9 Replies View RelatedSo if I am in a layout page and I plot the sheet directly to our printer the drawing comes out to scale.However if I plot to PDF using DWG to PDF.pc3, and then print to printer it is always slightly smaller around 10% to 15% smaller.
View 5 Replies View RelatedI am using AutoCAD 2013 and need to set my viewport scale to 1"=50'.
View 3 Replies View Relatedwhen I draw a shape and add a dimension to it, the text and the numerical and the arrows of the dimension are small, so I have to increase the text height manually
how can I make it automatically scale itself?
also similiar thing with the lines, I tried putting a dashed center line on a shape, it looks solid but when I zoom it it does not.
how can I solve this?
I am trying to find a routine that will allow me to offset an arc by a distance and to a scale.
The offest command is very limited as to how far I am able to offset without the boject completely vanishing.
I am trying to make a flat pattern from a cone or something close to it. The routines and programs that I have found do not quite accomplish this very accuratll. They are always off on the upper and lower arcs and on the distance between the arcs. Tho this would not completely sovle my problem, it would allow me to get the distance between the top and bottom correct.
when i go to preview plot after selecting D size, scale isn't correct. how do i change to correct scale for plotting after i've scaled each view in paper space. please see attached drawing.
Any good free tutorial online about viewports and plotting from them and to get correct scale?
Is it possible to scale a viewport with different X and Y values? Kind of like inserting a block with different X and Y values.
View 8 Replies View RelatedI've got a question about plotting to a measurable PDF with the correct scale.
Currently, if you plot to PDF (ARCH full bleed D 24x36 paper size) using 1:1 scale of the Layout area (including viewport, title block, etc) you get a nice PDF of the appropriate plan which would print to paper at the correct scale (1/16" = 1' 0'). If you set the plot scale to 1/16" = 1' 0' then preview/plot it then it appears completely tiny (like 2% of the page size), in the bottom left corner.
However, I want to make the PDF measurable. At the moment, if you do this using a 1:1 plot, the default numbers given by the measure tool are way out of proportion (a 29' dimension in the drawing is measured as 48,294 with no units). To get it to give accurate measurements, you have to tell Reader/Acrobat to ignore document scaling in preferences, then "Change Scale Ratio" to the appropriate scale ratio (0.625 in = 1 ft). This means you can measure to scale in Reader or Acrobat BUT these options disappear once you close Reader/Acrobat.
creating measurable PDFs from Autocad plots?
I exported a DWG from sketchup, for version AutoCAD 2010.
When i open it in my office with 2014 the scale is correct. But when i send it to a colleague with verion 2010 the scale is different.
I have a problem with line type scale for hidden line it appears different line type scale in another drawing, al though the setting for line type scale & Global scale factor is same for both the drawings. Is there any other setting for the line type.
View 5 Replies View RelatedI've imported a PDF file and I'm trying to do a quantity take-off by finding the area of certain areas (this is a landscape plan). However, I'm having trouble calibrating the scale so 10' on my plan is 10' according to AutoCAD as well.
View 2 Replies View RelatedI would like to solve a drawing insertion when I set the scale as 1 but when I insert the dwg, it looks smaller and the PROPERTIES box tells me that the dwg is .0364 in size.
View 1 Replies View Relatedhow can I change the scale of a dwg from AutoCAD 2013 version on 1'=1/4" into 1'=1/8" AutoCAD 2006?
View 4 Replies View RelatedI am trying to set up a scale of a known distance on a photgraph that I have put in autocad. I know that this distance is 100mm, and have tried to work out how to mark this known distance, and then be able to work out the measurements of other dimensions in the photograph, including non-linear measurements. Is this possible?
View 2 Replies View RelatedI have a problem between my template in inch and the one in mm.
Its the linetype scale that is wrong in the mm one, when i draw in the inch one, everything is fine but when i draw in the mm one, i have to set the ltscale to like 25 to see them at the same scale that they are in the inch one.
My guest is its because i've create my template for the mm one base on the inch one and i just change the unit type to mm. Is there a setting i could change that will arrange this?
Product Design Suite 2013
Having trouble finding the correct place to put the FEET, INCHES, METRIC, custom scales in the registry. I'm not sure if its any of the following or is it somewhere else now?
[HKEY_LOCAL_MACHINESOFTWAREAutodeskAutoCADR19.0ACAD-B000:409
[HKEY_LOCAL_MACHINESoftwareAutodeskAutoCADR19.0ACAD-B000:409AEC7.0AecBase70Scales
[HKEY_CURRENT_USERSOFTWAREAutodeskAutoCADR19.0ACAD-B000:409
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR19.0ACAD-B000:409AEC7.0AecBase70Scales
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
direction of where the DEFAULT SCALE LIST is stored in the C: drive?
I have set it up in the option tab and all is working, but will soon be installing several new PC's with AC and want to drop the stored file straight into the new PC's rather than having to type them out one by one on each PC.
Trying to zoom extents to 1/5.33XP which is a 3/16 scale (64/12=5.33). So evertime I try to zoom extents to 5.33 it will do nothing.
View 5 Replies View RelatedI'm drawing something much larger than the paper so I would like to chose paper size A(8.5x11) set the scale then print it out on A(8.5x11) paper. For example: my desk is approximately 65inch x 30inch and I want to draw and print it on A(8.5x11) paper. I want it to print with the drawing being accurate to scale...how do I do this?
View 9 Replies View Related