AutoCAD 2013 :: Inserted DWG Block Out Of Scale
Nov 7, 2013I would like to solve a drawing insertion when I set the scale as 1 but when I insert the dwg, it looks smaller and the PROPERTIES box tells me that the dwg is .0364 in size.
View 1 Replies
ADVERTISEMENT
AutoCAD 2013 :: Unable To Find Inserted Block
Nov 5, 2012I inserted a block into a very busy drawing. I can't find it now. Is there a way to locate it? I want to delete and insert a newer version, but I can't until I delete this one.
View 4 Replies View RelatedAutoCAD 2013 :: How To Update (title Block) Being Inserted As Xref
Oct 16, 2012How to update the “title block” being inserted as Xref?
I wanted to update the title block (inserted as Xref) as some changes occur in the original dwg but sounds not to work.
How the Xref is updated so that all changes in its original source can be reflected automatically?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2013 :: Applied Material Disappears From Part Of Block When Inserted Into Drawing
Aug 9, 2013I have a library of blocks that I built for our company to use. We recently upgraded from 2013 to 2014 and boy did it throw our library for a loop!
There is a check box (reflectivity) that leaves the materials black when the drawing shade mode is changed to Realistic (unless you go in and uncheck the reflectivity box) and while I have figured out how to alleviate that issue (by unchecking it on our tempate and saving it) I am still having a materials issue with our blocks.
I can open the block (and turn on Realistic mode) and all the pieces have their materials like they should. I then open a new drawing and insert the same block into the drawing .. one piece is sans material.
I cannot for the life of me figure out why it's there on one drawing but it gone when inserted. The new drawing has been purged and doens't contain anything it shouldn't.
[URL]
AutoCAD 2013 :: Block To Scale Based On Plot Scale?
Apr 19, 2013I have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
AutoCAD .NET :: Insert Block And Drag Jig Hiding Inserted Block At 0,0
Apr 11, 2013I have a pallete button that inserts a block then a drag jig to position it. The block is first inserted at 0,0 and dragged.
The block at 0,0 remains visible while a "duplicate" block is dragged. Is there a way to hide the original?
Insert block then calling the drag jig..
AddViewBlock(New Point3d(0, 0, 0), 0, ColorIndex, trans) psr = ed.SelectLast() DragView(psr.Value, "Bar Insertion Point")
In the DragView procedure I have:
Public Sub DragView(ByVal SS As SelectionSet, ByVal sPrompt As String)
'....
Dim ppr As PromptPointResult = ed.Drag(SS, vbLf & sPrompt, New DragCallback(AddressOf MyDragCallback))
AutoCAD Civil 3D :: 2013 Odd Block (scale Window) Bogs Down Drawing
Feb 12, 2013We have a large project that we converted from 2012 to 2013 - it had always been a little buggy in 2012 as it was a piece together from another consultant. Now though, it is extremely slow and there seems to be a 'block reference' around every block in the drawing. You can drag your select window and they all pop up like crazy and slow things down immensely (see screen capture). You can select them individually, they have nodes on all 4 corners and to move them, scales your block up and down. I tried block replace to our blocks which we know are fine and same problem. It also seems to be drawing specific although audit is clean.
View 9 Replies View RelatedAutoCAD 2013 :: Insert And Scale Dynamic Block From Tool Palette
Apr 25, 2013I am currently using Autocad 2014 and I am attempting to insert a dynamic block from a tool palette. I would like to click on a dynamic block in the tool palette and have it prompt for the (uniform) scale. It seems simple enough but either all the dynamic properties are lost or it is inserted at 1"x1" (the scale of my original block). How to get this to work?
View 3 Replies View RelatedAutoCAD 2013 :: Link Vport Scale Into Title Block As A Field?
Oct 7, 2013if it possible to insert vport's annotation/standard scale into title block as a filed? Does some variable exist or I have to create a formula?
View 2 Replies View RelatedAutoCAD 2013 :: Annotative Block Moves When Annotation Scale Changed
Mar 13, 2013Annotative block moves when annotation scale changed,
The solution for this problem is mentioned in the link below but sounds not to be useful:
[URL]....
I got a block that contains an attribute (attached) and created on layer zero while the current annotation scale is 1:100. As this annotation scale is changed (say to 1:200 or 1:50) this block moves from its original place to another one (as shown in the attached screenshots).
AutoCad :: Drawing Scale From Inserted Building Survey?
Apr 13, 2011I've not used AutoCad for probably 15 years. I used it in my government job, but have forgotten many commands. I have inserted a building survey into a new DWG, and remember that I can find a dimension on that survey, and use it to begin a scale for the drawing, so that I may make additions to the building drawing.
View 3 Replies View RelatedAutoCad :: Block Acting Funny When Inserted?
Aug 2, 2013I have made a few blocks that contain a few attributes. I have populated the Tag, Prompt, and Value for each block. When I insert the block the value seems to take on a life of its own and populate with text different than what I have entered.
View 7 Replies View RelatedAutoCAD .NET :: Inserted Block - Unable To See Attributes
Aug 3, 2011I have a function that inserts a file to be a block definition
db.ReadDwgFile(fileName, FileShare.Read,True, "")
Dim isAnno AsBoolean = db.AnnotativeDwg
Dim btrId As ObjectId = destDb.Insert(destName, db, False)
If isAnno Then
[code]......
When I create a block reference the attribute collection count is zero. Is there something I need to do with the block definition to enable the attributes.
I am using AutoCAD 2010 64 bit. (I did think I had this working on my 32 bit computer but will check tomorrow). Running the AutoCAD function Battman - sync fixes the issue.
AutoCad :: Remove Permanently Inserted Block?
Feb 17, 2013How do I remove permanently inserted block?
View 1 Replies View RelatedAutoCAD 2010 :: Dynamic Block That Contains Inserted Field
Mar 18, 2012“Dynamic block” that contains an inserted “field”,
I’m now encountered into two problems with this regard:
Why sometimes we get the number sign “####”?How can the field automatically be updated in case a “stretch” is made without the need to go and click “update fields”?How to make the “precision” of the field value (which represent the length) to be 5 such that the 2568 will appear as 2570 and the 2563 will appear as 2565
I’m attaching the block in case your time permits to have a look
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCad :: Make A Block With Date Automatically Inserted?
Jul 31, 2012see attached block. I would like the current date be present, instead of typing in the date for this block. When I insert "IFC" block, I would like todays date to be inserted automatically. I guess I am asking if you can make smart blocks in autocad 2009? Let me know if I'm not asking this question correctly.
View 7 Replies View RelatedAutoCAD .NET :: Block Created And Inserted Shows Text Entities At Origin
Aug 30, 2012I've written a method that creates a block definition and inserts one instance the newly created block definition. The block is comprised exclusively of lines and text entities. When the method is completed, all entities appear correctly on my machine.
However, when other users try to run the routine on their machines, the lines appear correctly but the text entities all appear positioned at the block insertion's origen. And the other users must manually regen the drawing after the command is run to trigger the text entities to move (or appear to move) into their proper location.
Though it wasn't necessary on my machine, I tried adding the following line as the last instruction in my command-method:
_drawing.Editor.Regen();
But even that last line's programmatically-triggered regen didn't solve the text location issue for my users. They still have to manually regen.
I also ensured that all (or most) of a test user's system variables were set to the same values that I use (via Express Tools export & import). But that didn't work either.
AutoCAD 2013 :: How To Rotate An Inserted OLE Object
Nov 15, 2013When i insert an OLE i want to rotate it from vertical to horizontal, but the rotate button just moved the full image around a point.
View 4 Replies View RelatedAutoCAD 2013 :: Control Order Of Attributes When Inserted?
Aug 2, 2012(Using AutoCAD 2013) I am trying to insert a .dwg as a block (which has attributes) using the "-insert" command, but the attributes order wrong. The .dwg I'm inserting is the "Exploded" version of the block (loose attributes) so that I don't have to explode it after inserting.
Is there a way to control the order of the attributes when they are inserted?
AutoCAD 2013 :: Xref Causing Newly Inserted Blocks To Not Appear?
Dec 10, 2013We are having a problem with blocks not appearing after xreferencing a drawing. We can place blocks as normal from the tool palette, but as soon as we xreference a 2D site plan and select blocks from the tool palette, they will not place. You can see them when placing, but once you click to place it, the block does not appear. I have copied out the site plan to a new dwg file, still does the same thing. Everything has been purged and ran an audit in the plan drawing and also the site plan drawing. The block does not show up in the block editor either. I am trying to avoid redrawing the site plan like we had done with two models that were doing the same thing. Remodeling a vessel and rebuilding a skid composite corrected the problem with two other drawings, but redrawing this site plan would take considerable time.
View 9 Replies View RelatedAutoCAD 2013 :: Scale Command Message - Extremely Small Scale Factor Ignored
Apr 13, 2012I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
AutoCAD 2013 :: Scale Of Drawing Field Versus Scale Of Object
Jun 27, 2013When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
AutoCAD 2013 :: Blocks Insert At Large Scale In 2014 - Correct Scale In 2012
Nov 22, 2013I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
AutoCAD 2013 :: Viewport Scale List - Zooms With Each Scale
Sep 6, 2013AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies View RelatedAutoCAD 2013 :: Multileader Text Angle As Inserted / Always Right-reading - Keep Horizontal
Aug 8, 2013I'm setting up styles and trying to play spot-the-difference; I can't see any difference between these three settings.
View 9 Replies View RelatedAutoCAD 2013 :: Change Global Scale Factor Or Current Object Scale In Specific Paper Space
Apr 10, 2013I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
AutoCAD Civil 3D :: Dynamic Block With Text Inserted Into Drawing Show Text Orientation Matched To Layout
Apr 17, 2013Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
AutoCAD 2013 :: 2013 Viewport Scale Control?
Dec 28, 2012My units are set to decimal. In acad 2004, the dropdown list showed options like 1"=50' In 2013, it shows options like 1/32"=1'-0" How can I get it to display such as 1"=50' like before?
View 2 Replies View RelatedAutoCAD 2013 :: Updating Block References Resets Block Table Selections?
Sep 4, 2012We use a number of blocks with block tables for data extraction here, and whenever one of the blocks is modified and updated, all of the block tables reset to the default value. This happens for any block reference change, not just changes to the block table (which makes sense that it would reset).
How can we update these blocks without having to manually change all of the block tables afterwards?
AutoCAD 2013 :: Dynamic Block In Action Doesn't Reflect Test Block
Jan 24, 2013I am in the process of fixing one of our dynamic blocks. It's a fairly simple fix where there was a typo in one of the names of our items in the lookup that needed to be fixed.
I changed the name of the item in the lookup table. I went and did the test block and it seemed to work fine, but when I bring the block into a drawing, it reverts back to the old lookup as if I did nothing at all.
I made sure that the path was correct and I even just dragged and dropped straight from Windows Explorer to no avail.Does AutoCAD keep referring to the old block? Did I forget to change something else?
AutoCAD 2013 :: New Block A Stretch Point Appears Even If Its Not A Dynamic Block
Dec 3, 2012my problem is whenever i make a new block a stretch point appears even if its not a dynamic block . also its not a stretch point, because when i click on it, it just move the block , and it always appear on the coordinates 0,0 it cause me a problem when I insert the block , autocad use this point as a base point , and its very far from the real block .
View 1 Replies View Related