(Using AutoCAD 2013) I am trying to insert a .dwg as a block (which has attributes) using the "-insert" command, but the attributes order wrong. The .dwg I'm inserting is the "Exploded" version of the block (loose attributes) so that I don't have to explode it after inserting.
Is there a way to control the order of the attributes when they are inserted?
I have a function that inserts a file to be a block definition
db.ReadDwgFile(fileName, FileShare.Read,True, "")
Dim isAnno AsBoolean = db.AnnotativeDwg
Dim btrId As ObjectId = destDb.Insert(destName, db, False)
If isAnno Then
[code]......
When I create a block reference the attribute collection count is zero. Is there something I need to do with the block definition to enable the attributes.
I am using AutoCAD 2010 64 bit. (I did think I had this working on my 32 bit computer but will check tomorrow). Running the AutoCAD function Battman - sync fixes the issue.
I'm using a blocklibrary, where I stored all my blocks, most of them have attributes.
Now I'd like to simplify my workflow and want to update the blocks that I inserted in a drawing trough LISP.
Is there a way to update all inserted blocks and attributes of the whole drawing a once? The idea is, that the LISP checks the whole blocklibrary and updates the inserted blocks that to not match with the once from the library.
in 2000 I was able to discover a command that allowed you to renumber a large selection of blocks in order. I have been searching for that command again every time I need to renumber a floor plan due to the addition of new spaces. What this command was and if it is still available in 2010? It would save a ton of time!
View 2 Replies View RelatedI have just upgraded to 2012 and I am having a few issues with the title blocks I am creating. For some reason everytime I add attributes to the block they never come out in order. For example I create the title page, add the attributes using ATTDEF (job name etc) then I create the block and check my attributes using BATTORDER, I can arrange them using the up/down buttons which is fine. But as soon as I try to edit the attributes outside the block editor they are all out of order again! I have tried making the attributes in and outside of the block editor with no avail! And to make matters worse I have a jumpy mouse.
View 9 Replies View RelatedUsing AutoCAD 2013 and TOL command to generate feature control frames. We set our lineweights based on layer assignments.
Problem is that when printing, AutoCAD seems to randomly assign a lineweight to the feature control frames. It can vary from what it's supposed to be (such as lineweight set for the dimension layer) or thicker than even what the object lines are set at. Seems to pick a random linewieght at time of printing for these elements (just the boxes, not the symbols/text itself).
Is there a setting we should be defining somewhere to force it to follow the lineweight of the layer that it has been assigned to? Known bug?
how to control the draw order of objects created within an array in a dynamic block?
I have a wipeout, which works fine on the array source, but when the array produces babies, it places them infront of everything (which is only logical), making the wipeout useless.
Can I set array babies to have the same draw order as their parent?
(AutoCADLT 2013)
Any routine that will allow to draw a polyline through existing blocks, in the order the blocks should be numbered? Therefore when the sequence has been specified by the polyline then user to define the number system required, and the blocks are automatically numbered in the sequence of the polyine start to finish.
View 9 Replies View RelatedAutodesk Inventor 2010 - How do I set default for "use standards notation" to off or unchecked in the "Edit Unit Attributes" dialog box for feature control frames? I want to do this because the Feature Control Frame style unit setting does not override it as I believe it should. This causes an extra value within the tolerance box of the feature control frame if the Standard General units differ from the style’s primary units.
View 1 Replies View RelatedWhen i insert an OLE i want to rotate it from vertical to horizontal, but the rotate button just moved the full image around a point.
View 4 Replies View RelatedI would like to solve a drawing insertion when I set the scale as 1 but when I insert the dwg, it looks smaller and the PROPERTIES box tells me that the dwg is .0364 in size.
View 1 Replies View RelatedI have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
I inserted a block into a very busy drawing. I can't find it now. Is there a way to locate it? I want to delete and insert a newer version, but I can't until I delete this one.
View 4 Replies View RelatedHow to update the “title block” being inserted as Xref?
I wanted to update the title block (inserted as Xref) as some changes occur in the original dwg but sounds not to work.
How the Xref is updated so that all changes in its original source can be reflected automatically?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
We are having a problem with blocks not appearing after xreferencing a drawing. We can place blocks as normal from the tool palette, but as soon as we xreference a 2D site plan and select blocks from the tool palette, they will not place. You can see them when placing, but once you click to place it, the block does not appear. I have copied out the site plan to a new dwg file, still does the same thing. Everything has been purged and ran an audit in the plan drawing and also the site plan drawing. The block does not show up in the block editor either. I am trying to avoid redrawing the site plan like we had done with two models that were doing the same thing. Remodeling a vessel and rebuilding a skid composite corrected the problem with two other drawings, but redrawing this site plan would take considerable time.
View 9 Replies View RelatedHow can I control the stack order of a shape layer with the path arrangement option on the shape tool options menu? It seems to me that this control does not do anything with shape layers ... does not control anything. How can I use this option?
View 1 Replies View RelatedI'm setting up styles and trying to play spot-the-difference; I can't see any difference between these three settings.
View 9 Replies View RelatedI have a library of blocks that I built for our company to use. We recently upgraded from 2013 to 2014 and boy did it throw our library for a loop!
There is a check box (reflectivity) that leaves the materials black when the drawing shade mode is changed to Realistic (unless you go in and uncheck the reflectivity box) and while I have figured out how to alleviate that issue (by unchecking it on our tempate and saving it) I am still having a materials issue with our blocks.
I can open the block (and turn on Realistic mode) and all the pieces have their materials like they should. I then open a new drawing and insert the same block into the drawing .. one piece is sans material.
I cannot for the life of me figure out why it's there on one drawing but it gone when inserted. The new drawing has been purged and doens't contain anything it shouldn't.
[URL]
My units are set to decimal. In acad 2004, the dropdown list showed options like 1"=50' In 2013, it shows options like 1/32"=1'-0" How can I get it to display such as 1"=50' like before?
View 2 Replies View RelatedI can't find where to set the display order of layers. I have lines that display under a PDF underlay but I can't drag the layer above the others. They appear to be in alphabetical order, which, while frustrating, I can live with if AC will allow me to easily move layers around some other way.
View 7 Replies View RelatedI have been unable to make Draw Order work well. The attached file and other ones I created would not work. The goal is to have the boarder and text (color 7) always stay on top after it is created as a block and pasted to any drawing. After pasting it, the text go underneath the shade (color 155). I have used Draw Order, picked the objects in the order I would like, repeated the same steps inside the Block Editor and Edit Block In-Place, still, the block would not work. I never had this issue before - seem to have stared today. Don't know what else to do. The only thing that works is keep recreating the block till one works, which seldom works.
View 7 Replies View RelatedI know that when I select a group of objects and then list them, the list displays the properties in the order I drew them, is there any option I can change this order? I mean, for example the direction I select them or something like that.
View 1 Replies View RelatedIn the "MEP 2014 Whats new .." Presentation is available as a new feature: "Display order by layer," What command (s) is meant here?
View 1 Replies View RelatedHaving trouble with the display order command? It does not work when you right click or when you type in the command. It says command unkown.
View 1 Replies View RelatedI Xreffed my Profile Border (title block) into paper space then xreffed my profile.dwg into the model space. When I plot, the gridlines from the border plot on top of the profile lines. Is there way to change the plot order of the Xref files?
View 4 Replies View RelatedI am currently trying to order a drawing to organise certain layers on top of the other, everyone within our team is having the same problem and are find the draw order command and the right click action very inconsistant - i was wondering if there was a better way to organise and control which layer sits infront of others for publishing, we have a number of view port templates that also dont have the same draw order as the model space.
View 3 Replies View Relatedsome attributes you can double click and edit within the dialogue box, others you have to double click and they are greyed out in the box, you have to click the little button with ... on and edit in place on screen... why?
whats the difference between the block atributes? attached is an example...
I am looking for a way to increment an attribute so that when i have a block with a number attribute and i make multiple copies of or array it the number changes incrementally.
View 1 Replies View RelatedI have some blocks with attributes, with the default of some of the attributes being blank. When I try to transfer the block to my Tool Palette, the block loses the attributes that have blank defaults. Why are these attributes disappearing from the block?
View 8 Replies View RelatedI am not very familiar with block attributes or data extraction. I have lots of questions.
i have 20 blocks each inserted multiple times. I would like to provide drop down menus to track each individual part and label size, location, etc. Can i insert attributes to one block and copy the attributes to other blocks?
Can i pull in info from an excel document, or do i have to enter the info line by line in the lookup table? (i have 400 names to assign in one of the dropdown menus)
Step by step process to pull the info from the attributes in these blocks into an Access document?
I work for a company that has several AutoCad seats. I have created a block with 4 attributes. On my computer and others the block works fine. On one computer 3 of the 4 attributes are placed at 0,0 instead of with the block.
View 2 Replies View Related