AutoCAD 2013 :: Order A Drawing To Organise Certain Layers
Mar 15, 2013
I am currently trying to order a drawing to organise certain layers on top of the other, everyone within our team is having the same problem and are find the draw order command and the right click action very inconsistant - i was wondering if there was a better way to organise and control which layer sits infront of others for publishing, we have a number of view port templates that also dont have the same draw order as the model space.
View 3 Replies
ADVERTISEMENT
Apr 17, 2013
I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
View 9 Replies
View Related
Aug 19, 2013
I can't find where to set the display order of layers. I have lines that display under a PDF underlay but I can't drag the layer above the others. They appear to be in alphabetical order, which, while frustrating, I can live with if AC will allow me to easily move layers around some other way.
View 7 Replies
View Related
Nov 21, 2013
How do I get the draw order to stay the way I want when I close and reopen a drawing? I even think that a couple times, without even closing and reopening the drawing, the draw order has flipped back to the way I don't want it after changing it.
View 3 Replies
View Related
May 9, 2013
I have been working on a detailed section drawing in AutoCad 2013
I saved the file in different files as i gone along, I have been trying to open the file everytime i do all the layers are there but only two are visible all the other seem to be invissible.
I tried it with each file on different computers, same version of AutoCad no success.
It apears that in the preview before opening the file it is all there but when actually opening the file its only a random two layers that come up, missing around 10 others which have the majority of the drawing /details on there.
I tried the unhide, changing line weights in the layer menu, opening the back ups. is there anything else I can try.
View 9 Replies
View Related
Sep 1, 2011
I have a quick question. When I use the layer control dropdown menu, the layers do not appear in alphabetical order like they do in Layer Manager.
Is there a way to fix this?
View 2 Replies
View Related
May 30, 2012
Is there are tool somewhere where you can make the draw order layer specific. I.e so we have a layer with a certain number of items on it that always appear above another layer with other types of items.
We tend to use leaders a fair bit and they often drop below some of our design elements, ideally we want them to be at the front & have to spend time bringing to front / sending to back etc.
View 2 Replies
View Related
Sep 29, 2011
Is there anyway that I can assign a layer to be always in the front/on top of all other layers in draw order?
View 0 Replies
View Related
Jan 22, 2013
Here is what's happening:
When I open more than one drawing the second drawing that I open does not show (but is opened) I see the first drawing that was already open. If I open a third drawing, the same thing happens the first drawing shows ( but the second and third are both open).
Is this something to do with changing the Quick View Drawings Order?
View 1 Replies
View Related
Apr 15, 2011
I'm trying to build a routine for my job to insert a block which consists of 3 single line variable attributes in a specific order. I need to be able to do this on many different drawings, and I would like to share this ability with my coworkers. Using the DesignCenter is not an option. In order to do this, I saved a drawing which consisted of the three attributes in the layout in which I need them to appear, however the order in which it prompts me to enter them is reversed. I already know how to set the order of attributes in an EXISTING block definition using the BATTMAN command, as every time I run the routine again, I'm redefining the block definition.
I'm not sure if it's important to know this, but the routine consists of a button with the following macro:
(command "-insert" "c:/folder/drawing.dwg" (getpoint "
Choose Insertion Point: ") (* (getvar "ltscale") 2) (* (getvar "ltscale") 2) "0");
EDIT: It works perfectly fine on my home computer, though my home computer runs an older version of acad.
View 4 Replies
View Related
Oct 15, 2012
I have been unable to make Draw Order work well. The attached file and other ones I created would not work. The goal is to have the boarder and text (color 7) always stay on top after it is created as a block and pasted to any drawing. After pasting it, the text go underneath the shade (color 155). I have used Draw Order, picked the objects in the order I would like, repeated the same steps inside the Block Editor and Edit Block In-Place, still, the block would not work. I never had this issue before - seem to have stared today. Don't know what else to do. The only thing that works is keep recreating the block till one works, which seldom works.
View 7 Replies
View Related
Mar 8, 2013
I know that when I select a group of objects and then list them, the list displays the properties in the order I drew them, is there any option I can change this order? I mean, for example the direction I select them or something like that.
View 1 Replies
View Related
Apr 19, 2013
In the "MEP 2014 Whats new .." Presentation is available as a new feature: "Display order by layer," What command (s) is meant here?
View 1 Replies
View Related
Feb 22, 2012
I am having some issues with sheetset. The pdf name is name of the drawing + name of layout.
1. The sheet sets do not follow the order of the drawings layouts
2. The list is not according to the drawings order in the directory
3. The sheets are automatically combined when I want them to be separate
4. There are numbers 1,2,3... automatically prefixed to the sheet causing additional trouble.
View 3 Replies
View Related
Oct 28, 2005
Change the order of layers I have created. So they sit on top of each other, in a different order.
View 8 Replies
View Related
May 26, 2008
applyng a layer and flattening. Now i really want to get over this hurdle so that i can save important images unflattened for further re-adjustment later.
I have browsed the web for two days and found nothing that helps me. The crux of the issue is that i get to a point where i have applied maybe three adjustment layers and then aaply say a sharpening layer only to find i cannot see its effect on the image due to its order in the stack.
View 2 Replies
View Related
Aug 15, 2011
Well, I had need something that had put the layers in a random order.. I show a picture so ya see (each "big pixel" is a layer.Tried to make them look randomized, but it didn't went that well.
View 16 Replies
View Related
Aug 22, 2012
Having trouble with the display order command? It does not work when you right click or when you type in the command. It says command unkown.
View 1 Replies
View Related
Aug 2, 2012
(Using AutoCAD 2013) I am trying to insert a .dwg as a block (which has attributes) using the "-insert" command, but the attributes order wrong. The .dwg I'm inserting is the "Exploded" version of the block (loose attributes) so that I don't have to explode it after inserting.
Is there a way to control the order of the attributes when they are inserted?
View 3 Replies
View Related
Dec 17, 2013
I Xreffed my Profile Border (title block) into paper space then xreffed my profile.dwg into the model space. When I plot, the gridlines from the border plot on top of the profile lines. Is there way to change the plot order of the Xref files?
View 4 Replies
View Related
Sep 20, 2006
There are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?
View 5 Replies
View Related
Jun 20, 2012
I recently started working on Inventor 2013 and I'm trying to copy a drawing view in order to place it on another sheet. Unfortunatly I see no copy option. Am I doing sth wrong or it's due to the changes in the version?
View 7 Replies
View Related
Nov 3, 2013
I have used Gimp for years and today I simply cannot move layers. In the layers dialog I usually drag the layers into the desired order but for no reason the layers simply float back to their original position. I have tried;
- Clean install of gimp
- Opening various gimp files (xcf)
- Creating new xcf files
The layers are not;
- Locked
- Floating
I have attached a video of the problem, which can also be viewed at;
[URL].......
View 3 Replies
View Related
Apr 21, 2012
I'm working on a book that has watermark on all pages and jpegs too of a4 size. Working in earlier version [x5], I used to overlap all the watermarks which was located in master layer. When I used to import a fresh jpeg on new pages, the watermark went below the jpegs. What i used to do was create a new master layer and then cut pasted the watermark in that layer, and the watermark came above the jpegs in the pages that were added later. In CorelDRAW x6 this i'm not able to do.
The watermark remains bottom of the jpeg, no matter what i do. if i edit the same file in version X5, it works fine and then i get it into x6 and do rest of stuff it works fine. The watermark problem still exists.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 5 Replies
View Related
May 31, 2013
I have an Illustrator document with 932 layers. I would like to automatically sort the layers in alphabetical order
View 1 Replies
View Related
Oct 9, 2013
I started to convert ACAD blocks to mass elements in order to convert them to IGES.
I need to import AutoCAD 3D objects to Factory Design Suite. The conversion takes
quite some time on my 1230V2 Xeon and I wondered if I could reduce the precision of
the conversion in order to speed things up?
All the Options like facetdev don´t apply to the conversion but to the view in ACAD only.
View 4 Replies
View Related
Dec 5, 2013
the layer order will not function as soon as the block is made dynamic. I have been creating my blocks the harder way and still have more to do, so what to do.
The last time I asked the Autodesk technician, I was told it is a program (Autodesk) issue which I call a bug. I have tried the draw order and the Textofront still, no better result.
View 7 Replies
View Related
Dec 12, 2013
Using Autocad2013. Roughly two weeks ago we updated our company server. Since then, in the Sheet Set Manager, the 'Model View' tab is no longer in alphabetical order. The drawings are just randomly listed now, no order whatsoever.
View 2 Replies
View Related
Nov 15, 2012
Working in AutoCAD LT 2010.
Drawing format 2007 or 2010
bedit, OK if you regenall after
refedit, Ok if you regenall ofter
design Center - display order goes out the window. The inserted block is redefined but the rest of the drawing loses all its display order. sortents (127, 33, 51, etc) and displayorderctl does nothing, either before or after the block is redefined. hatches and blocks just jump to the front (display order shows as order of drawn not order as moved to) Regenall does nothing.
absolute nightmare with display order managed elevations (solid hatch, baconies, windows, multple buildings, all overlaying!!)
View 4 Replies
View Related
May 17, 2013
Is it possible for me apply an adjustment layer to specific layers? I also want to keep the layers in order for organizational purposes.
View 11 Replies
View Related
Oct 1, 2012
How to switch the order of the layers of a wall without changing the dimension,
In the screenshot below, I wanted to switch the order of the layer without changing the dimension. Is that possible?
View 5 Replies
View Related
