AutoCAD 2013 :: Applied Material Disappears From Part Of Block When Inserted Into Drawing
Aug 9, 2013
I have a library of blocks that I built for our company to use. We recently upgraded from 2013 to 2014 and boy did it throw our library for a loop!
There is a check box (reflectivity) that leaves the materials black when the drawing shade mode is changed to Realistic (unless you go in and uncheck the reflectivity box) and while I have figured out how to alleviate that issue (by unchecking it on our tempate and saving it) I am still having a materials issue with our blocks.
I can open the block (and turn on Realistic mode) and all the pieces have their materials like they should. I then open a new drawing and insert the same block into the drawing .. one piece is sans material.
I cannot for the life of me figure out why it's there on one drawing but it gone when inserted. The new drawing has been purged and doens't contain anything it shouldn't.
I would like to solve a drawing insertion when I set the scale as 1 but when I insert the dwg, it looks smaller and the PROPERTIES box tells me that the dwg is .0364 in size.
I inserted a block into a very busy drawing. I can't find it now. Is there a way to locate it? I want to delete and insert a newer version, but I can't until I delete this one.
All of a sudden my cursor will become invisible. This happens only with AutoCAD. and if I switch between drawing windows it will appear on another drawing file. I have to close the drawing and open it again and then the cursor will be back only to disappear again. The cursor is visible if I move it back to the ribbon or bottom controls. It seems to happen only when it becomes the cross-hair cursor. I can still make selection windows and right click.
Mouse is working fine with all other programs and drivers are up-to-date.
I created a partial sphere with six features on the surface of the sphere. I then applied a circular pattern to each of the siz features. I called the features r1, r2, ..., r6.
r1, r2, r5 and r6 worked as expected. there are 16 features evenly spaced around the surface.
r3 and r4 are different in that the original feature is missing after applying the circular pattern.
each of the six features is as identical as I could get them. I followed the same build seauence for all of them.
each feature is made up of four objects - cut1, cut2, sweep and dimple. I selected the four objects for a row, then applied the circular pattern.
If I delete the circular pattern for r3 or r4, the original feature becomes visible again.
So, why are r3 and r4 behaving differenly than the other four?
I have tried a number of things, including re-drawing feature r3 from scratch with no change in teh results.
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
I have a pallete button that inserts a block then a drag jig to position it. The block is first inserted at 0,0 and dragged.
The block at 0,0 remains visible while a "duplicate" block is dragged. Is there a way to hide the original?
Insert block then calling the drag jig.. AddViewBlock(New Point3d(0, 0, 0), 0, ColorIndex, trans) psr = ed.SelectLast() DragView(psr.Value, "Bar Insertion Point")
In the DragView procedure I have:
Public Sub DragView(ByVal SS As SelectionSet, ByVal sPrompt As String) '.... Dim ppr As PromptPointResult = ed.Drag(SS, vbLf & sPrompt, New DragCallback(AddressOf MyDragCallback))
I added a uvw map/bitmap image to the material editor. The image shows fine in the material editor but when i apply it to the object which is just a plane it doesn't show it in the viewports.
I clicked on a new material ball, clicked the box next to diffuse, selected bitmap. Opened a jpeg file of the material Im using. It showed uo on the material editor ball. Then when I apply it to my object it just turns grey.
I do a lot of work where I start with a full assembly drawing, then make more drawings for the individual parts. Is there a way to link the title block parameters in the part drawings to the title block in the full assembly drawing? The only way I found was to link the parts together and then grab the info for the drawings off of the parts, but if I'm implementing this in a template used by others I want them to still be able to just fill in the blank on the assembly drawing to make it work.
I was able to get iProperties to show parameter buttons, but I haven't seen any way to link to other files or anything like that.
I would like to ask if its possible to extract part of the drawing from modelspace then add title block in lay-out and scale the extracted drawing...how will i do that?
I'm trying to associate a material with a sheet metal rule, however, in the Styles Editor, it won't let me save a material to any sheet metal rule other than Default. If I set a material, then switch to a different rule, then switch back, it sets the material to blank.
The contour values when place on the the render material of rock image it disappears so I had to place it on the side. how the image is use a render material?
I have made a few blocks that contain a few attributes. I have populated the Tag, Prompt, and Value for each block. When I insert the block the value seems to take on a life of its own and populate with text different than what I have entered.
I have a function that inserts a file to be a block definition
db.ReadDwgFile(fileName, FileShare.Read,True, "") Dim isAnno AsBoolean = db.AnnotativeDwg Dim btrId As ObjectId = destDb.Insert(destName, db, False) If isAnno Then [code]......
When I create a block reference the attribute collection count is zero. Is there something I need to do with the block definition to enable the attributes.
I am using AutoCAD 2010 64 bit. (I did think I had this working on my 32 bit computer but will check tomorrow). Running the AutoCAD function Battman - sync fixes the issue.
Wondering if there is a way to make a block that will embed itself into AutoCAD - so that when I open a new drawing or a drawing I've recieved from someone else, the block will always be there and ready to be used.
I have had this issue in 2013 and now after downloadign 2014 the same problem has come up. Drawing is fine other than every so often after you copy a group of items and try to paste it as a block it thinks for about 10-15 seconds then when you are prompted to enter a base point it doesnt show up. I can however select items, copy, and paste as long as it is not a block. I have tried to copy and paste a block that consists of just two polylines so I know it is not a size issue. To add more confusion if I shut down my computer and restart open the same file and try to copy and paste the same item as a block it will allow me to do it once and then it wont work again. I have attached a screenshot of the command history while trying to paste as block. I am not sure why it substitued all of these items? I dont need to shut down and restart everytime I need a new block inserted.
“Dynamic block” that contains an inserted “field”,
I’m now encountered into two problems with this regard:
Why sometimes we get the number sign “####”?How can the field automatically be updated in case a “stretch” is made without the need to go and click “update fields”?How to make the “precision” of the field value (which represent the length) to be 5 such that the 2568 will appear as 2570 and the 2563 will appear as 2565 I’m attaching the block in case your time permits to have a look
see attached block. I would like the current date be present, instead of typing in the date for this block. When I insert "IFC" block, I would like todays date to be inserted automatically. I guess I am asking if you can make smart blocks in autocad 2009? Let me know if I'm not asking this question correctly.
I created and saved a title block as a .dwt file, with no problems. When I open my title block, I cannot get a 3D assembly drawing to show as a 3D drawing in the title block on the layout tab. If I transfer the title block to the model space, it rotates to the same usc as the assembly drawing?
I have two dynamic blocks. One is the plan view of a cylinder and one is the elevation view of a cylinder. When I change the parameter of the OD on the elevation, I want the plan view to change. I'd like to keep them as blocks (they're a little more complicated than just cylinders), but when I try to use parametrics to tie these two dimensions together I get: "Constraints cannot be applied between nested objects in the same block or Xref."
I'm trying to edit an architectural Title Block. I've went into block editor and did attribute definitions. However, when I save it I can't insert it into a drawing. Is there anything I can do to prevent this from happening?
