I'm trying to associate a material with a sheet metal rule, however, in the Styles Editor, it won't let me save a material to any sheet metal rule other than Default. If I set a material, then switch to a different rule, then switch back, it sets the material to blank.
View 6 RepliesI open my assembly and get this prompt."The material referenced in the sheet metal rule could not be located....."
There are several sheet metal parts in this assembly, so I am not really sure which part it is talking about. Would be good if it listed the part number so I could correct it. So I am off to find the one that is causing the trouble. I close my iam and open the first sheet metal part, no dialog box, so I assume its not this one. Close it, and open the next one. No dialog box, so I open the next one..... I continue this until I have opened all the sheet metal parts in this assembly and NONE show me the dialog again.... huh!! That was yesterday.
I come in this morning, start Inventor and open one of the sheet metal parts from yesterday and immediately get the dialog again. The problem is that this dialog will only appear ONCE per Inventor session.
Once I nailed down the offending part, I then tried to find the offending material. I dont really know what this dialog is telling me cause the materials for the rules are stored locally in the part. Why is it even trying to reference a material in the library?
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 2.80ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, Update2
Vault 2013
I want to change the material of a sheet metal part using inventor api.I tried something like code
Dim partDoc As PartDocument partDoc = inventorApp.Documents.Open(FilePath & filename, False) If partDoc.SubType = "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}" Then Dim smDef As SheetMetalComponentDefinition smDef = partDoc.ComponentDefinition Dim style As SheetMetalStyle style = smDef.SheetMetalStyles.Item("sheetMetalRule")
But I can't get the code for material change.
I have setup all our Sheet Metal Rules to be all of our stocked in house sheet metals. The sheet metal rules are named like:
ALUM 5052 H32 1/2" (Part Number)
ST STEEL T304 3/8" (Part Number)
STEEL 44W 1/8" (Part Number)
etc.
And each rule has the proper thickness, material, and some standardized bend radius's. I've done this to introduce more uniformity in our designs, and to also allow the designer to put as much information into the model as possible, so that if someone else does the drawings, there is no question as to which material is used.
I now want to bring in the Sheet Metal Rule name into the drawing automatically. I can't seem to find a way to reference the Sheet Metal Rule directly from the drawing. What I need to do is pick a standard field in the i Properties (I used Stock Number), and put in =<Sheet Metal Rule> so that now the Stock Number references the Sheet Metal Rule, and then in the drawing I can just reference the Stock Number, and it will come in.
I don't like having to use the Stock Number as a middle man though, as none of our existing models are setup like this. Is it possible to reference Sheet Metal Rule in the drawing without having to use another field as a placeholder for the information?
In versions prior to Inv. 2009 the sheet metal rules were contained in the template and in 2009 they are in the styles library. In the past year we have changed some of our material and I would like to be able to look for certain sheet metal rules on legacy drawing and change them to a new one. Both styles are fairly close but I want to keep things consistant going forward. This way I can purge the style if it is not in the style library. Just can't figure out the code for changing the active style.
View 3 Replies View RelatedWhen our VAR initally setup our system for us he made it so the material selected in with the sheet metal rule would appear as the stock number in the ipropertys. I then set the sheet metal rule so the sheet metal rule material also had our material stock number for each different thickness. This gave me a value that was automatically loaded for drawings.
Now we have migrated to 2013 and in the migration things got mixed up so this no longer happens. I am assuming that when the SM Rule is set it creates a named parameter somewhere. What that parameter is? I am thinking if I go into the parameters of the template and set stock number = to SM Rule parameter I will regain this functionallity.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
Is this possible in ilogits? Imports sheet metall rule from ilogic
View 1 Replies View RelatedI have not found a way to remove a sheet metal rule from appearing in the list of available options when making a sheet metal part. Is there a way to manually remove the incorrect rule?
I tried opening the sheet metal rule xml file and deleting out the section that codes the rule I want to remove, but after opening inventor and checking the xml file again, it has returned.
What is the iLogic rule for identifying if a part is in a "modeling" state or "sheet metal" state?
View 5 Replies View Relatedknow a rule to check if this dialog box sheet metal defaults "Use Thickness from Rule" is checked, and checked a rule to automatically clear since using a rule amending the plate thickness but if the box is checked catastrophic error occurs, and unchecking the rule works as expected.
View 2 Replies View RelatedSo I'm in the midst of redoing my Sheet Metal Rules, and custom materials, since the update to 2013 kind of destroyed that. I created a new material library, to house all of my custom Materials in. I set it to be the only Material Library in the project, so now when I open up a file in that project, I only see my Custom material list, and that works fine when I go into the iProperties as well, the material list shows up correctly.
But when I go into the Styles Editor, and go to add my new custom Materials to my Sheet Metal Rules, the list of materials is shown in duplicate. I have attached a couple of screenshots of me opening the iProperties, and the Sheet Metal Rules in the same file.
In my title block I have a material section that pulls to iProperties from the model
One is material, which displays the material used in the model
and the other is manually input by me in the comments section of the model, I typically only use this field for sheet metal description, example, .125 Sheet Metal, this saves me from a drawing view to show thickness only.
In my sheet metal template I have checked the little box for the thickness model parameter so it will show up as a custom property - model.
So i can display the thickness parameter anytime the sheet metal base view is placed.
My issue is I want the thickness property to have the following with it "Sheet Metal"
But I only want this to appear if the base view is in fact sheet metal, all other parts and assemblies, this field would be blank,
So this is what I want when a sheet metal part is placed:
This is what I want to display when a part is placed:
This is what I get when anything is placed:
Sheet Metal shows up because:
I am looking for a Rule that will only apply <Thickness> Sheet Metal to my title block only if the base view is in fact a sheet metal part. Is this possible??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I have a template that I have created, in it I have a rule that changes the stock number and description based on which sheet metal rule is selected. The weird thing is it works correctly if the first sketch is a rectangle. If you sketch a circular shape and make that the face it will not work. It blanks out the values for the stock number and description.
I'm running Inventor 2014 update 2.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 33212 StartFragment: 314 EndFragment: 33180 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimiPropValAsString=""
DimiPropDesAsString=""
SelectCaseSheetMetal.GetActiveStyle()
[code]...
I'm using Inventor 2013. For some reason the material in a sheet metal part is not linked to the Sheet Metal Rule.
In the attachment you see on the left side that the material TRPL5-7 (that's a material I created) is linked to the Sheet Metal Rule TRAANPLAAT_5_7. But if I select TRAANPLAAT_5_7 as Sheet Metal Rule in Sheet Metal Defaults (see right picture in attachment) the Material doesn't change to TRPL5-7.
I am attempting to model an existing part as it is currently being manufactured a simple hopper, and am having an issue with a corner.
Look at the converging corner of the attached file.
How could this be done to avoid the problem? Or can it? 2010 Suite-SP4 64bit
We use different types of sheet metals, from stainless to bronze, and different thicknesses.
Currently, in order to show the correct material on a parts list, I have to duplicate the material Stainless Steel, and rename it to say 20 Gauge Stainless Steel. Then again for 16 Ga, 14Ga, 12 Ga, etc...
I'd like to have the parts list show the common material such as "Stainless Steel", with another column for the sheet metal style such as "20 Gauge."
We also use items such as Plastic Laminate. I'd like to create a generic material for the physical properties of "Plastic Laminate", and then change the material appearance to say "Formica #1234 Walnut". Again, i'd like to be able to put this in (2) columns on the parts list.
How do we change sheet metal parts material, thickness Bend Radii from an assembly in groups.
View 3 Replies View RelatedA collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
View 4 Replies View RelatedI have created a rule that will replace the border sheet when the sheet size will be changed, so users won't have to do it manually.
The problem is that the rule won't run when the sheet size is changed. I find that events for triggering the rules are rather few under drawing enviroment.
I thought to use "iProperty Change" event, providing I assign the SheetSize to a Custom iProperty, but the iProperty won't update automatically as well.
AIP 2014
Windows 7 x64
Dell Precision T7400 Intel(R) Xeon(R) CPU X5472 @ 3.00GHz (4 CPU's), 8Gb RAM, NVIDIA Quadro FX 5600 1536MB GDDR3
I created the following user parameters:
-Thickness
-Width
-Length
-Dia
I then created a Custom iProperty which consisted of the following "formula": Finished Material Size = <Thickness> x <Width> x <Length> Lg.
eg. of Finished Material Result : Finished Material Size = 6 x 25 x 300 Lg.
The problem comes up when dealing with diametrical components as the above formula will only populate for square or rectangular parts. Which would work if I could use iLogic code to populate the Finished Material Size iProperty. I have tried but failed.
First I created another user parameter called "Geometry Type" which has a drop down selection of either "DIA" or "SQUARE, RECTANGULAR".I then created the following iLogic code to set 0 as the value for the "unused" size parameters
If PART_GEOMETRY = "DIA" Then WIDTH = "0"If PART_GEOMETRY = "DIA" Then THICKNESS = "0"If PART_GEOMETRY = "SQUARE, RECTANGULAR" Then DIA = "0"
The part I just can't get to work is as follows.
I need some iLogic code which will populate the "FINISHED MATERIAL SIZE" custom iproperty with one of the following based on my "GEOMETRY TYPE" selection. "DIA" would return the following to "FINISHED MATERIAL SIZE": = Ø <Dia> x <Length> Lg.
While "SQUARE, RECTANGULAR" would return the following to "FINISHED MATERIAL SIZE": = <THICKNESS> x <WIDTH> x <LENGTH> Lg.I tried the following code but it does not work:
If PART_GEOMETRY = "DIA" Then iProperties.Value("Custom", "FINISHED MATERIAL SIZE")= "Ø"DIA "x" LENGTH "Lg."If PART_GEOMETRY = "SQUARE, RECTANGULAR" Then iProperties.Value("Custom", "FINISHED MATERIAL SIZE")= THICKNESS "x" WIDTH "x" LENGTH "Lg."
I just what to cut a sheet metal,
and I don't know how (see in Capture.JPG where i what to cut, and test.iam what I what to cut).
Where is the icon "project the geometry" ?
I need a flat pattern for this part but it seems impossible. STEP 2 illustrate the desirable result.
View 7 Replies View RelatedWorking with sheet metal and laying out a pattern for the cnc and was wondering if there is a way to imprint an extrusion onto the surface instead of cutting it. Mainly this will be used for a marking tool so the line type or layer would need to be different.
View 5 Replies View RelatedI am working on a bin type unit, and am having trouble creating a flange, I am creating the bin in the final product stage, then I will separate into manufacturer components. I am having trouble adding this flange around the top 4 edges of the bin. I need the four corners to meet on a miter 45. I will then rip down each seam and have 4 separate panels.
Is this a bad workflow? Is there a better route? I attached the part in Inventor 2013 format,
Attached are two sheet metal parts that we need to unfold and make them flat for a drawing. We cannot seem to capture the reference A or reference B planes asked for by the unfold command.
View 3 Replies View RelatedIs there a way to get the appearance of perforation on a sheet metal tube without having to create each and every hole? Looking for an appearance to drag onto the surface. Kind of like when you make a part look like it is made of brick. It being just an image on the model surface.
View 9 Replies View RelatedVery thin gauge aluminum sheets with a composite sandwiched between them.
The challenge is, the panels are relatively thick, 3mm or 4mm, but a router is used on the fold lines before bending to cut through all but the outer aluminum. This makes for a very tight bend radius.
So, thick 3 layer material, tight bend with mitered corners. Can Inventor's sheet metal tools handle this?
Can this part be made with sheet metal tools...it will be made from aluminum. I attach the shape made with standard tools and the sheet metal attempt.......how do add the sides in sheet metal.
View 4 Replies View Relatedhow incredible it is that Inventor still does not have a functional normal cut option for sheet metal like Solidworks and Solidedge have long had and I agree. I realize that there are the standard workflows like using derive and thicken to get around this problem. However, for those interested, there is a way to make a normal cut (for laser/cnc) directly in the sheet metal part in many cases. It involves using a sketch to split a face and then using the resulting profile for a thicker/cut feature. I'm always interested in any other methods out there for obtaining normal cuts in complex sheet metal (for a clean dxf export). By the way, Autodesk, do you actually not have any plans of ever adding functionality in this area?
View 4 Replies View Relatedwhat's the best way to make tabs on a rolled round ring. I got it done using unfold/refold option but I can not get sheet metal flat.
View 4 Replies View RelatedI am using IV ultimate 2013
just found about this add-in:[URL]
But its not working for me:
I ran the installer, created a sheet metal part and hit rebuild all, it did not create any proeprties, also tried to manually create the properteis then hit rebuild, no go.
I also did a search on my hardrive for the ApplicationPlugins, and placed the sheet metal folder in all of them(there were 3) tried again noto.
The add-in also does not appear in the add-in manager.
Or is there different what to get the flat pattern dimensions in 2013