Is there an easy way to switch a title block after a drawing has been made and without affection the part and dimensions within the drawing?
View 2 RepliesI do a lot of work where I start with a full assembly drawing, then make more drawings for the individual parts. Is there a way to link the title block parameters in the part drawings to the title block in the full assembly drawing? The only way I found was to link the parts together and then grab the info for the drawings off of the parts, but if I'm implementing this in a template used by others I want them to still be able to just fill in the blank on the assembly drawing to make it work.
I was able to get iProperties to show parameter buttons, but I haven't seen any way to link to other files or anything like that.
I would like to ask if its possible to extract part of the drawing from modelspace then add title block in lay-out and scale the extracted drawing...how will i do that?
View 9 Replies View RelatedI'm looking for a solution to place the overall model dimensions in the title block.
We have a box (Promted entry) in our company title block were we manually typ our overall dimension of a part (or in some cases assembly).
For our planning engineer this is easy because he can easy see the dimensions of the "base material" or the size of a container / box in case of an assembly.
The risk that sometimes people forget to change these dimension when the model is changes.
Now I'm looking for a solution (e.g. VBA / iLogic) to place the overall dimensions Automatically in the title block.
The overall dimensions are available in the "BIM Exchange" menu > Check Design. Maybe these dimensions can be used.
We're using Inventor 2014.
Is there an add in or something for faster type in the title block in a drawing? Name, title etc?
Right now the author and date are automatically but when i save the file to for example to "D1234 hammer" it becomes the part number.
I have to edit the title.
I want to save the file to "D1234 hammer" and the partnumber to be "D1234" and title "hammer".
IS there a add-in that I type the title and name and its auto fill the title block? Or do I have to create a custom title block so the drawing can understand to only to take the numbers from <part name> and the letters becomes <title>?
We are going to be making a new title block and I have been looking at ways to get the new title block into the old drawings. It looks like the Inventor Drawing and Resource Wizard is the way to go.
The steps seem pretty straight forward and simple but I am not getting the correct results. For the source drawing I select my new title block and leave the boxes for borders, my new title block name, and sketched symbols checked. I then pick my drawing I want to get the new title block in. On the last step I can select Yes or No and get the same results. When I reopen Inventor and the drawing it still has the old title block in it.
I am trying put drawing numbers on my drawings. The drawing number is "019-02-00038-x" where "x" is the page number in the set of drawings. How do I set this up? Every time I try to change "x" it changes it for the entire set of drawings.
I'm working with Inventor 2014.
Is it possible to set the drawing Scale to the Title Block? Seems like it is missing parameter...
View 8 Replies View RelatedI was curious, when creating multi sheet drawings, how can I place different information in the title block on each drawing?
Example, 2 pages, Description on page 1 = PAGE 1 DESC, by default this same description will show up on all subsequent pages. How do I get page 2 description to be different?
Inventor 2014 PDS
Can I pre-fill some of text in my drawing’s title block under the “Field Text” –“Edit Property Fields” ? Because some of the files I will use the same text again and again, if I can save the pre-fill text title block in the template, it will save me lots of time.
View 6 Replies View Relatedadding an unused template drawing title block resource.
'UPDATE TITLE BLOCK SHEET 1ThisDrawing.ResourceFileName="X:TemplatesStart Drawing.idw"
ThisDrawing.KeepExtraResources=False
DimoDrawingDocAsDocument=ThisApplication.ActiveDocument
'If iProperties.Value("Custom", "V1Scale") = NullString
oDrawingDoc.ActiveSheet.TitleBlock.Delete
[code]....
I want to add new properties so I can have new, custom rows when I go to Fields text in a drawing environment?
I can see how you add Prompted Entry ans so. Cant add anything to basic properties.
I am currently working with fx parameters and iLogic to drive a model and it's corresponding drawing to change based on a single user parameter.
I have managed to get the drawing to update both the scale of the views I need and the size of the sheet with the change in parameter using the following rule:
IfParameter("EB75551.ipt.Rise")<1801Then
ActiveSheet.ChangeSize("A1", MoveBorderItems :=True)
ElseIfParameter("EB75551.ipt.Rise")>1800Then
ActiveSheet.ChangeSize("A2", MoveBorderItems :=True)
EndIf
However when i attempt to use this with the title block using the function:
ActiveSheet.TitleBlock="My Title Block"
in place of the sheet change size it brings up the error message:
Error in rule: Drawing Title Block, in document: Drawing
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
I have read elsewhere that this is due to me having prompted entries for the scale and drawn by fields, however when i use the function designed for prompted entries: ActiveSheet.SetTitleBlock("Other Title Block", "promptedEntry1", "promptedEntry2")
It fills in the prompted entry fields from the code and if i change these entries in the "edit field" option they are overwritten when it is updated.
Is there a way have the prompted entries when you open the drawing fill in the "promptedEntry1" field in the rule so that I can use the rule? Or am I going about it the wrong way?
I should point out i'm new to iLogic and no-one in my workplace can use it so each person changing the "promptedEntry1" field to the scale they wish isn't a wise move.
I have some code to replace the current title block with a title block from a template file. I just don't like how it adds a new title block definition named "copy of titleblock". I'd like to delete or replace the current title block definition so only the newly added one is listed.
Sub test() Dim odrawdoc As DrawingDocument Set odrawdoc = ThisApplication.ActiveDocument If (odrawdoc.DocumentType <> kDrawingDocumentObject) Then Exit Sub Dim oTemplate As DrawingDocument Dim oSourceTitleBlockDef As TitleBlockDefinition Dim oNewTitleBlockDef As TitleBlockDefinition Dim oSheet As Sheet Set oTemplate = ThisApplication.Documents.Open(ThisApplication.FileOptions.TemplatesPath & "template.idw", False) Set oSourceTitleBlockDef = oTemplate.ActiveSheet.TitleBlock.Definition Set oNewTitleBlockDef = oSourceTitleBlockDef.CopyTo(odrawdoc) ' Iterate through the sheets. For Each oSheet In odrawdoc.Sheets oSheet.Activate oSheet.TitleBlock.Delete Call oSheet.AddTitleBlock(oNewTitleBlockDef) Next oTemplate.CloseEnd Sub
I'm just being picky at this point, but I don't want a buildup of title block definitions. We reuse drawings all the time which is why a simple method of updating a title block would be nice. I can just imagine in some years time after a title block update or two there are 20 "copy of copy of copy of .................. titleblock" listed in a drawing file.
I've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I’m trying to save myself a bit of time and was wondering if it is possible to have part of the file location displayed in the title block?
The current title block we are using shows the full file location of the drawing but I was wondering if it is possible to show only part of this?
The reason I am asking is that when a project progresses to the next stage we have to go through each drawing and change the status to warrant, tender, construction etc. so I am looking for a way that this can be done automatically and I was thinking if only part of the file location could be used this process could be done by simply moving the drawings to the next folder? Our projects folders are split down in to subfolders for planning, warrant, tender etc. which corresponds with the status field on your layout. So instead of having to update this status manually every time the project progresses this would update to the folder that the drawings are in.
Example:
I:Projects## - Project TitleDrawingsConstructionGround Floor Plan.dwg
Am trying to get the "Construction" folder to display in the status field on the layout.
I created a standard title block template drawing for my student classwork exercises, and when I constructed the title block I keyed in real dimensions to ensure the title block would completely print on a piece of 8.5 X 11 paper. Now whenever I attempt to draw a large scale drawing (say a 36" dia circle, it draws the circle well outside my title block. I know why this is happening, I just need some tips about how to allow a title block template to be constructed around my current drawing reguardless of the drawing scale.
View 5 Replies View RelatedHow do I insert a title block into my drawing?
View 9 Replies View RelatedI'm having trouble inserting my title block in a 3D drawing. I'm kind of new to 3D modelling but it's probably a small mistake i'm making.
I started with my view in SE Isometric, drawed something and then I copy/pasted my title block from another drawing, all in modelspace.
My drawing is 3D and my title block is 2D but in the wrong position.
i have a more then 10 folder with one common x-ref i want to attached that x-ref like title block in all folder drawing how i ll attached in easy way also i want multi printing folder how can i send print in one time all folder
View 6 Replies View RelatedIs there any command to fit or re-size a title block to A drawing in the layout?
View 4 Replies View Relatedfind a template with a title block that i can insert my information. I already have my project completed on a 24x36 sheet and would just like to copy it over.
View 3 Replies View RelatedI created a drawing in model space about 75' x 75'. Then created a title block drawing in paper space. Now would like to mesh the two so I can plot the drawing with title block. When I insert the title block drawing it is so tiny it can't be seen. What am I doing wrong?
View 3 Replies View RelatedI need to extract data from AutoCad Drawing using C# or VB.Net.
I have a Title Block which is not inserted using attributes. It has some horizontal & vertical lines drawn to look like a table and text added between them. See the attchment.
I need to extract data from that and display in Ms-Excel or in a datagridview.
I created and saved a title block as a .dwt file, with no problems. When I open my title block, I cannot get a 3D assembly drawing to show as a 3D drawing in the title block on the layout tab. If I transfer the title block to the model space, it rotates to the same usc as the assembly drawing?
View 6 Replies View RelatedI am about to recieve an order to provide drawings to a new client who has requested me to author an new blank drawing title block for the required drawings. The company does however have a Logo and other necessary details.
My question is: What format should the logo be in and how do I transfer this into the drawing title block, bearing in mind that I will most likely have to change the size to suite the various size drawings sheets, namely A0, A1, A2 etc?
I have attempted to search for this information on CT and having found the topic been denied request to open whatever. This is a copy of the notification receive when attempting to open a topic:
"Forbidden You don't have permission to access /forum/showthread.php on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request."
What I need to know is, will the drawing sheets/titleblocks attributes etc, I have created to insert in AutoCAD work in Civils 3d or will i need to create separate ones.
View 4 Replies View RelatedI have 4 layouts all from the same drawing that I need desperately to print now. But for some reason only the border and Title block will print for me. What have I done to cause this? And how can I rectify it? I need to print these tonight
View 3 Replies View RelatedI'm trying to edit an architectural Title Block. I've went into block editor and did attribute definitions. However, when I save it I can't insert it into a drawing. Is there anything I can do to prevent this from happening?
View 2 Replies View RelatedIs it possible to create a 'drawing scale' defined attribute inside my title block when brought into paper space? I tried setting it up using 'plotscale' fieldname with various formats and it keeps coming in as 1" = 1' or 1:1 rather than 1" = 20' because that's what my plot scale is inside paper space but my drawing scale is 20 scale. If I bring the title block in model space, it adjusts, but I don't plot from model space. Surely there's a way to make this automated inside paper space.
Also, I just setup a 'Date' attribute inside my title block today. What's the difference between Date, Saved Date and Plot Date? Will 'Date' update if its in a drawing and opened up a month from now and saved or do i need to take 'Date' out and replace with 'Saved Date' or Plot Date'?.