I have a problem with line type scale for hidden line it appears different line type scale in another drawing, al though the setting for line type scale & Global scale factor is same for both the drawings. Is there any other setting for the line type.
View 5 RepliesI have several .dwg files which I attach using XREF so that I can ensure I have the latest versions combined.
The problem is that the line types do not show up correctly. After looking up on google I have found that this is a problem due to it being a 3d model rather than it being flat.
I managed to half solve the issue by inserting each drawing into one, then exploding the whole image. Then changing the scale in the bottom right to around 1:200 to make the line types visible.
My problem is this ends up being a lot of work as the separate drawings can be updated daily. Is it possible to have all the drawings Xref'd in and to be able to have the scale changed to be able to read the line types? I tried to save the XREF setup as a template, then just bind all the drawings into one, explode and change the scale. But for some reason this doesnt work for me. I end up with just solid lines, rather than line types. I don't the drawings are made up of several lines, all of different length. (This I have been told is why the scales do not appear correctly)
I have been shown one method to work around this, which is to open the Xref drawings, explode them, then take each section of line and manually change each scale to the biggest that shows up.
I need to represent some lines, in model space, that alternate in color, yellow/red, that are "scalable" with respect to different scale view ports in paperspace.
my initial idea was to use two lines, each in which the dash and space between were the same distance, then just offset the yellow/red lines enough for each to fill the others gaps. But, wondering if it was possible to represent that in a single linetype?
I have tried to load a custom line type from Autocad 2013 to Inventor 2013, through Edit Laver-->Line type -->Other --> Load, but it doesn't appear in the drop-down list. I have read that previous Inventor releases coudn't work with autocad custom or complex line types. Is it still like that?
View 3 Replies View RelatedHow to find the hidden line type!!!!
View 6 Replies View RelatedI'm woring with 2D polylines as exported from another piece of software. The problem I have is that the LTGeneration resets to disabled evertime a polyline is edited, ie broken or trimmed. Plinegen is set to 1 as the system variable, but as far as I can tell every time a line is broken etc it creates a new entity that doesn't inherit the ltgen properties of the previous line or the system variables. I know i can convert to polylines, but is there a better way?
View 6 Replies View RelatedWhy when I choose a new layer (which happens to have a different colour association) the colour of the new drawn line stays the same?
[URL] .....
I understand there is some setting you type in the command line to solve this problem but I am unable to find what that is.
I'm trying to plot 3D objects with hidden lines. I've set the viewport SHADE PLOT property to "Legacy hidden" and set my visual style to 2D Wireframe with 2D Hide-Occluded Lines linetype set to "Dashed". The hidden lines do appear, but I don't like the size and spacing of the dashes. Is there a way to add "Hidden" linetype to the selected visual style? Or perhaps there's a way of adjusting the linetype scale for visual style occluded lines (similar to LTSCALE or PSLTSCALE command)?
View 2 Replies View RelatedI created some new custom line types using express tool featute in autocad and I saved it with a .lin extension. It is only available in that drawing itself. How I canget those line type in all my new drawings.
I tired to edit the default linetype file even it doesnot appear in the linetype manger windo.
*IRRIGATION,IRRIGATION LINE
A,1,-.066042,["IRR",Standard,y=-.104589,s=.25],-.493243,1
*SEWARAGE,SEWARAGE LINE
A,1,-.031293,["SEW",Standard,y=-.104589,s=.25],-.651197,1
I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
How to change the Color, line type and Line weight for the Line using .Net.
View 9 Replies View RelatedI have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies View RelatedI have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
I have been using AutoCAD for many many years and only recetnly discovered the "MEASUREMENT" command. This has allowed me to work out why some hatches are larger than others but I still don't understand hatches! I have a few questions,
Lets establish some things I know,.
1) MEASUREMENT 1 is for us metric people.
2) HPSCALE alters the hatch scale for all drawn hatches after
3) Default for HPSCALE is 1 (tiny in metric)
Now the questions:
1) Does the hatch scale relate to any type of distance variable? e.g. the gap between the lines in ANSI31 is say 5 times the hatch scale or is this totally and unterly random?
2) If there is a logic behind it, does this apply to all hatches in ACADISO.PAT? e.g. scale of 10 produces 10mm gaps in all hatches? (I know it doesn't but there must be some logic to it? Surely?)
2) If the hatch scale is not logical (see Q1) what is the point in the meaurement command and ACAD.PAT and ACADISO.PAT files?
When opening properties tab, I always trying to make my line scale value into decimal but i didn't know how to do with it.
View 6 Replies View RelatedMy units are set to decimal. In acad 2004, the dropdown list showed options like 1"=50' In 2013, it shows options like 1/32"=1'-0" How can I get it to display such as 1"=50' like before?
View 2 Replies View RelatedI'd like to have a linetype that is a solid polyline with open circles every so often indicating a proposed field tile line. I'd also like to have the same line filled in circles to indicate existing tile.
How do I go about creating each line?
I'm in 2010 C3D.
How can create in vba with line type ?
View 4 Replies View RelatedI want to create my choice line type so any lisp to create line type ok.
View 1 Replies View Relatedhow do you put a “>”. I’m trying to make a linetype that looks like -> -> -> i know 2,(but i don’t know what goes here),-2
View 7 Replies View Relatedhow can i create this line type which attached?
View 4 Replies View RelatedI'm using cs6 and I want to rotate and scale individual letters. Whenever I try to do it I am only altering the text box. Is there any way I can do the same thing with the text itself without rasterizing it?
View 4 Replies View RelatedI just installed CS6. I have found a resizing problem that seems to exist relating to both objecgts and type.
For example, I was changing the leading in some text. I typed in 11.8 and the next thing I know the leading is set as 2 pts. I have changed other thiings within the text window and had the type rescale its width. It is a bit like "whack-a-mole" in that you fix one thing and it resets something else.
When I have typed in numbers to proportionately resize an object, the next thing I know, the computer makes it much smaller. If I hit command-Z to try to get back to where I started, it resizes it in even increments (like .125" or something).
Is this some kind of maddening helper function (like the spelling correction in mail program) that can be turned off?
For example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies View Relatedif I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
My boss wants me to make the most outside line of a walltype to be the heaviest pen. If I go to the properties of the wall and changethe boundary it changes the boundary of the item in the wall, each boundary independentfrom the other. Such as a wall made of the following: BRICK, AIR SPACE, SHEATHING,STUD AND GYPSUM BOARD. In this wall theexterior face of the brick and gypsum board need to be heavy.
View 4 Replies View RelatedI am trying to create a new linetype. It is a simple linetype, made up of a continuous chain of capsules that I've attached here. I understand that linetypes require shape files and line definition files. However, AutoCAD isn't even telling me how to create the shape file(s) I need to begin making the linetype.
The capsule is .12 units long at its widest, and will need to connect end-to-end.
For years we've had a line type change toolbar that worked just fine. This years update may have changed something that the old macro is missing or doesn't need anymore because none of the commands work anymore. One of the macros reads:
^C^Cselect chprop;previous;;ltype;dashed;ltscale;4;;