AutoCad :: Line Type Scale For 3D Polylines / Blocks Using XREF
Jan 20, 2012
I have several .dwg files which I attach using XREF so that I can ensure I have the latest versions combined.
The problem is that the line types do not show up correctly. After looking up on google I have found that this is a problem due to it being a 3d model rather than it being flat.
I managed to half solve the issue by inserting each drawing into one, then exploding the whole image. Then changing the scale in the bottom right to around 1:200 to make the line types visible.
My problem is this ends up being a lot of work as the separate drawings can be updated daily. Is it possible to have all the drawings Xref'd in and to be able to have the scale changed to be able to read the line types? I tried to save the XREF setup as a template, then just bind all the drawings into one, explode and change the scale. But for some reason this doesnt work for me. I end up with just solid lines, rather than line types. I don't the drawings are made up of several lines, all of different length. (This I have been told is why the scales do not appear correctly)
I have been shown one method to work around this, which is to open the Xref drawings, explode them, then take each section of line and manually change each scale to the biggest that shows up.
View 8 Replies
ADVERTISEMENT
Apr 17, 2013
I'm woring with 2D polylines as exported from another piece of software. The problem I have is that the LTGeneration resets to disabled evertime a polyline is edited, ie broken or trimmed. Plinegen is set to 1 as the system variable, but as far as I can tell every time a line is broken etc it creates a new entity that doesn't inherit the ltgen properties of the previous line or the system variables. I know i can convert to polylines, but is there a better way?
View 6 Replies
View Related
May 17, 2012
I have an xref file named Base.dwg. I need to replot a drawing (Overall_Road.dwg) which has Base.dwg as xref
I changed the line type of one layer in the Base.dwg file. Changed from DASHED2 to continuous line. Saved and closed Base.dwg
When I open Overall_Road.dwg, the line type doesn't update. I opened "Layer" window and under Linetype, it shows "Base|DASHED2".
How can I fix it to show the updated line type?
View 5 Replies
View Related
Jun 4, 2012
I have a problem with line type scale for hidden line it appears different line type scale in another drawing, al though the setting for line type scale & Global scale factor is same for both the drawings. Is there any other setting for the line type.
View 5 Replies
View Related
May 13, 2012
The 2D drawings I am working with were exported from 3D REVIT files to 2D AutoCAD files. There are several XREFed drawings that are both mechanical and architectural from the original REVIT files that for whatever reason, the block's line weights came over with line weights of 70 in those blocks.
When I plot, the objects are a blur with the line weight so high. I tried using the command "setbylayer" but that didn't work since nested blocks still had lineweights of 70. Is there a VBA or LISP routine to run through all the blocks (including nested) that can change the line weights to a given number?
View 3 Replies
View Related
Aug 15, 2011
I want to change the color, line type, width and layer of all my blocks in my drawing. is there a way to do this with out opening all the blocks for editing? I am using AutoCAD 2009.
View 1 Replies
View Related
Nov 22, 2013
I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
View 3 Replies
View Related
Dec 12, 2013
how can i separate same type of blocks in dynamic blocks? all layers are same..
View 9 Replies
View Related
Mar 17, 2011
I need to convert all polylines on layer to blocks. Each polyline gets replaced with a block that is near the approximate center of polyline. it can also be at the first or last node of pline. or just near the center. (polylines are rectangular).
View 6 Replies
View Related
Feb 7, 2013
Is there a way or a lisp to scale multiple 3d polylines, at same time, and the base point is the start point of each one?
View 4 Replies
View Related
Mar 9, 2012
Whenever I select a block or polyline in 2012, the program hangs for about 1 minute. This never happens when using 2010 on the same system. Obviously this can't continue.
View 3 Replies
View Related
Dec 9, 2013
I have drawn my blocks and text using annotation scale. When I xref the legend which has also been drawn using annotation scale, I cannot set the scales. That is annotation scale does not work when I use xrefs.
View 0 Replies
View Related
Apr 15, 2012
I have a file that is x-reffed into another file. In both instances the drawing has the same measurements, but when I make a viewport in the receiving file the drawing (in the viewport) is 1000x smaller than it should be. It should be noted that I am working in metric units AutoCAD 2011.
View 5 Replies
View Related
May 3, 2012
Is there anyway to line up the dashes of overlapping polylines so that when I have 2 or more dashed polylines on top of each other the polyline will still looks dashed. Because at the moment the dashes don't line up and the polyline appears as a solid line where they overlap.
View 1 Replies
View Related
Mar 27, 2012
I have used color to determine line widths. The plotter set-up recognizes color and assigns the appropriate line width. My new company is determining line width by using polylines. Am I behind the times? Or, is this a better way. Willing to change.
View 4 Replies
View Related
Aug 7, 2012
i have a structural xref drawing that has all the text 10"high. I xref (overlay) that drawing into another one, but that drawing is going to have a scale 1/4"=1'-0" is there a way to auto scale all the text in to xref to become 4" high?
a bit more information
the structural drawing that im xrefing in will be overlayed over my floorplans, then printed at the 1/4"=1'-0"
I need the structural base drawing to keep the 10" text height because some times i have to print off the entire structural plan separate.
View 4 Replies
View Related
Aug 2, 2011
I make a drawing1 with layers on it and then I made another drawing2. I Xref the drawing 1 as my reference , where I put the column of the building. When I open drawing 2 referencing drawing 1, my scale is different. my inches scale is becoming feet when referencing in drawing 2. I put the same LTscale and limits in both drawing
View 4 Replies
View Related
Aug 22, 2013
How does it work? I see in the properties after I high lite it. Annotative Scale no/yes. We xref one drawing into other drawing and the view scale changes. will my hatch look the same or will the smaller view scale look really big in the drawing.
View 1 Replies
View Related
Jun 14, 2012
I created some new custom line types using express tool featute in autocad and I saved it with a .lin extension. It is only available in that drawing itself. How I canget those line type in all my new drawings.
I tired to edit the default linetype file even it doesnot appear in the linetype manger windo.
*IRRIGATION,IRRIGATION LINE
A,1,-.066042,["IRR",Standard,y=-.104589,s=.25],-.493243,1
*SEWARAGE,SEWARAGE LINE
A,1,-.031293,["SEW",Standard,y=-.104589,s=.25],-.651197,1
View 4 Replies
View Related
Dec 8, 2005
Is there a way to turn off blocks in an xref? Example.I would like to xref a lighting plan, however the "Exit Sign" blocks are to large and cover up the sprinklers, tees, and piping in my fire protection plan. Additionally the “Exit Sign” blocks have been inserted on the same layer as the "lighting" blocks which are very important in laying out sprinkler heads so I don’t place a sprinkler in a light.
I know of ways to fix this problem by editing the electrical drawing but it might cause more problems for the electrical draftsman. Any way to turn off these blocks?
View 7 Replies
View Related
Feb 13, 2012
polylines in my current drawing have started to come out with a very fat line width. It doesnt matter what layer its on, even though previously they were drawn 'properly' i.e the thin line width that shows when you have show/hide lineweight on 'hide'. This doesnt happen on any other drawing tool (arc, circle, polygon etc). The lineweights in layer control are all 'default'. I can't explain this as it seems to have just happened. Is it a known bug or something?
View 2 Replies
View Related
Mar 8, 2012
How to change the Color, line type and Line weight for the Line using .Net.
View 9 Replies
View Related
Aug 29, 2012
How i can change, path type of xref file from fullpath to no path
View 1 Replies
View Related
Apr 8, 2011
I'm inserting an xref, and its coming in at a weird scale.... I noticed that in the 'external reference' dialog box the 'block unit' scale factor is set to a weird scale (.0394), but it will not let me edit it.
View 5 Replies
View Related
May 16, 2012
I have a file I received from a consultant that has an annotative block in it. I've been trying to xref (attachment, not overlay) it into our files, and it's not showing up. I've got the affected layers on, the block units for both files are identical..
This block has editable attributes in it. The attribute is what is not showing up...the point, which is the other block component, displays correctly in the xref.
View 2 Replies
View Related
Apr 4, 2012
Just wondering how I would return attributes of blocks in my drawing's XRefs?
I've come across one example that is in VB but no luck.
I currently have a list in a form that consists of all the XRefs in my drawing and I wish to return all blocks and attributes that are linked to the selected XRef.
View 7 Replies
View Related
Jul 30, 2013
I'm a document controller that is trying to ID the situation with 2600 drawings. Some files are so large - 250,000kb, they won't open. They have bound xref's in them. We want to ask the contractor to unbind them and attach them as normal xref's. I need to view if a drawing has bound xref's. I just want to see them as BLOCKS which I now understand they are. How do I do view the blocks that were once xref's?
View 9 Replies
View Related
Jan 25, 2013
Can I scale up a 100+ blocks at once and have each base point as the blocks insert point?
View 9 Replies
View Related
Nov 28, 2012
I am trying to xref a base drawing. But everytime I insert the drawing, the scale factor always comes up to be 12. I tried changing it, but it won't let me. I have attached an image of the problem I am getting.
View 1 Replies
View Related
May 7, 2013
I've got a drawing that contains an XREF. I've got a field reading the viewport object's Custom scale>Use scale name. However, whenever the drawing is loaded up all of the XREF's scales get imported. Since they contain the same scales, the field changes to read the XREF scale instead of the one it was set to. They are the same scale, but the field reads the XREF one first. Here is a screenshot showing what I'm talking about. Notice that the viewport's properties never show the scale as 1:20_XREF, but the field does.
I've been having to click "show all scales", do a SCALELISTEDIT, remove the XREFs, then do a UPDATEFIELD. I have to do this every time the drawing is open. It stays that way until C3D is closed. This becomes a problem when I go to PUBLISH a sheet set. If I haven't opened all the sheets in the sheet set and changed the scale list then they all get the wrong scale list shown.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
View 7 Replies
View Related
May 14, 2012
When I import shape files the polylines will not take the layer style I move them to. They stay a continuous linetype. Linetype and Lineweight is set to ByLayer. Only difference between the new lines and the lines drawing correctly is the lines that stay continuous are 3D polylines and the correct ones are normal polylines. What I need to do to make the imported lines accept my layer linetypes?
View 8 Replies
View Related
