Illustrator :: Type And Objects Re-scale Erratically?
Feb 7, 2014
I just installed CS6. I have found a resizing problem that seems to exist relating to both objecgts and type.
For example, I was changing the leading in some text. I typed in 11.8 and the next thing I know the leading is set as 2 pts. I have changed other thiings within the text window and had the type rescale its width. It is a bit like "whack-a-mole" in that you fix one thing and it resets something else.
When I have typed in numbers to proportionately resize an object, the next thing I know, the computer makes it much smaller. If I hit command-Z to try to get back to where I started, it resizes it in even increments (like .125" or something).
Is this some kind of maddening helper function (like the spelling correction in mail program) that can be turned off?
View 1 Replies
ADVERTISEMENT
Jul 26, 2012
How does one remedy this Adobe error message? "Can't scale the objects. The requested transformation would make some objects too small to use." This one always gets me. I'll spend more time trying to find the object in question. This has happened in almost al versions, but this time it's CS5.
View 3 Replies
View Related
Jan 17, 2013
Since installing Illustrator CS6 I am finding that my mouse jumps around the screen erratically while trying to draw making it almost impossible to use the program. It is particularly bad when I connect to a projector for training purposes. This doesn't happen with any previous version of Illustrator (or any other program for that matter). I know it isn't something as simple as my mouse because I tried several different ones but to no avail.
I am using Illustrator CS6 for Windows on Windows 7 and my problem is mainly on my laptop which is a Dell Vostro 1520.
View 5 Replies
View Related
May 12, 2007
Illustrator has been having a problem where anytime that I click the mouse down, it starts jumping around the screen, usually to about 2" down and 3" from the left of the screen. This is only in Illustrator though, Photoshop, and any other programs work fine.
I've tried disabling the Logitech driver too,
Running:
Pentium D 840 3.2 GHz
3 GB DDR2 667
120 GB SATA
Windows Vista Business
Adobe Creative Suite CS2
View 5 Replies
View Related
Aug 6, 2013
I'm using cs6 and I want to rotate and scale individual letters. Whenever I try to do it I am only altering the text box. Is there any way I can do the same thing with the text itself without rasterizing it?
View 4 Replies
View Related
Aug 7, 2012
I have a series of triangles along a curved path in Illustrator CS6 (mac, if that makes a difference). I want to make the triangles large as the approach the middle of the path, and smaller towards the ends. The triangles' lower-most corner must remain locked to the path. I've tried pattern brushes, but not only do they distort the triangles, but there's also no way to scale the triangles reliably (to my knowledge).
View 5 Replies
View Related
Aug 12, 2013
Scale Stroke and Effects Option Odd Behaviours. If multiple objects selected and they're scaled in only one dimension, Illustrator assumes this to be a scale in 2 dimensions.
Is there a work around for this?
View 14 Replies
View Related
Sep 14, 2012
Normally I'd use ArtDirector Toolkit, but I can't install it or oter software right now (too long to explain why).
Anyway I have several elements to scale, and I'm trying to find a formula/calculation to determine scale.
Example - 1 object is 3.7486" and I want to make it 5.3231" - how do I calculate the scale percentage to enlarge it?
View 7 Replies
View Related
Jan 19, 2014
How do I fix this? I've gone through view settings so far, without success.
View 1 Replies
View Related
Nov 5, 2012
I have multiple icons placed in a document, from several different sources (all are vector objects) -- see the included image. They vary in size and what I would like to do is find a less onerous method of resizing all the heights to a specific size, while scaling the width proportionately. I have found several scripts that come close to a solution (see links below), but none that allow me to input a height (or width) in inches and have all the objects resize to that height proportionately.
Change Width to the Width of the narrowest object --> Script01
Change Height to the Height of the shortest object --> Script02
Change Multiple Attributes (JohnWundes) --> Script03
icon image (couldn't place via Adobe Forum) --> click
View 2 Replies
View Related
Jul 9, 2012
I have lost the ability to free scale objects/text boxes etc. in Illustrator CS5. I have to use the scale tool every time I need to adjust the size of something and it is not a sustainable technique in terms of time/productivity/function.
View 5 Replies
View Related
Oct 3, 2012
CS6 keeps crashing and doing crazy things on me while working on my 2D/3D composite digital room setting. It seems to me like what's causing most of the crashing is the materials. Here's the problems:
- Crashes constantly while simply trying to select a material from the 3D panel
- Sometimes places meshes in a totally different spot in the scene and dissallows me to move them elsewhere
- Meshes are gone when opening the file, and I can't get them to reappear
I'm trying to stay composed at this point. My artwork would look great if, well, 3D in CS6 would simply WORK. But I'm remaining calm, and consulting you all..
I'm modeling, texturing, and UV mapping the 3D room objects (such as tables, chairs, hutches, etc.) in Maya 7, exporting as .obj files and placing into PS, and merging them with the scene layer in order for everything to have consistent lighting.I've also tried taking the 3D settings to Basic and the shadow quality to low, in case the crashes are due to cpu performance. I've also went and got the latest update for PS CS6
Here's some system specs:
Win7 Home Premim, 64 bit
2.8ghz Intel Core i7
8gb ram ddr3
NVidia GeForce 310 512 mb
View 3 Replies
View Related
Feb 11, 2014
I'm using AI CC now, but I noticed this problem in earlier versions of AI: If I want to place a one-word label on an illustration I move the type insertion cursor to a speific point on the screen image and click, but then the flashing insertion point, where the label will actually start, pops up elsewhere, usually a line or two above where the cursor was, and a pica or two to the left, forcing me to type the label, then move it into position rather than simply typing it in the right place and moving on. The problem is merely annoying, but I'd like to fix it. It's probably a matter of ignorance-I simply haven't read the right documentation, but I don't know what to call the problem. Where can I find out how to change the position of the cursor relative to the insertion point?
View 2 Replies
View Related
Apr 29, 2013
I want to create text on a circle path, so drew the circle, went to the "type on a path tool" and clicked on the circle. I keep getting the message "can't create type". I have tried to use the direct selection tool to select the circle first and without the direct selection.
View 3 Replies
View Related
Mar 18, 2013
My Type Tool does not select type by double clicking or click and drag. (Windows CS 5 V15.1). This is what I have tried so far and the problem still exists.
Check preferences for "Text": "Select text-object by path only" should be off. Checked. It was off. Didn't fix it.
Check the toggle for Show/Hide Edges in the View menu. Cmd(Ctrl)-H. Checked. Edges Showing. Didn't fix it.
Trashed my Prefeerences. Didn't fix it.
View 6 Replies
View Related
Jul 2, 2012
Working on a poster in Illustrator. Have added area type, using the type tool. Now I'd like to increase the size of one line. I can't select or edit any of the type with the type tool. I moved the type to a new layer, saved, closed Illustrator, restarted my Mac (OS X 10.7.4). Looked in preferences, in case there's an issue there. No luck.
By the way, I also don't see handles when in the selection tool any more. Don't know if that's related.
View 2 Replies
View Related
Jun 4, 2012
I have a problem with line type scale for hidden line it appears different line type scale in another drawing, al though the setting for line type scale & Global scale factor is same for both the drawings. Is there any other setting for the line type.
View 5 Replies
View Related
Jan 20, 2012
I have several .dwg files which I attach using XREF so that I can ensure I have the latest versions combined.
The problem is that the line types do not show up correctly. After looking up on google I have found that this is a problem due to it being a 3d model rather than it being flat.
I managed to half solve the issue by inserting each drawing into one, then exploding the whole image. Then changing the scale in the bottom right to around 1:200 to make the line types visible.
My problem is this ends up being a lot of work as the separate drawings can be updated daily. Is it possible to have all the drawings Xref'd in and to be able to have the scale changed to be able to read the line types? I tried to save the XREF setup as a template, then just bind all the drawings into one, explode and change the scale. But for some reason this doesnt work for me. I end up with just solid lines, rather than line types. I don't the drawings are made up of several lines, all of different length. (This I have been told is why the scales do not appear correctly)
I have been shown one method to work around this, which is to open the Xref drawings, explode them, then take each section of line and manually change each scale to the biggest that shows up.
View 8 Replies
View Related
Apr 13, 2011
I have been using AutoCAD for many many years and only recetnly discovered the "MEASUREMENT" command. This has allowed me to work out why some hatches are larger than others but I still don't understand hatches! I have a few questions,
Lets establish some things I know,.
1) MEASUREMENT 1 is for us metric people.
2) HPSCALE alters the hatch scale for all drawn hatches after
3) Default for HPSCALE is 1 (tiny in metric)
Now the questions:
1) Does the hatch scale relate to any type of distance variable? e.g. the gap between the lines in ANSI31 is say 5 times the hatch scale or is this totally and unterly random?
2) If there is a logic behind it, does this apply to all hatches in ACADISO.PAT? e.g. scale of 10 produces 10mm gaps in all hatches? (I know it doesn't but there must be some logic to it? Surely?)
2) If the hatch scale is not logical (see Q1) what is the point in the meaurement command and ACAD.PAT and ACADISO.PAT files?
View 3 Replies
View Related
May 16, 2012
I notice with GIMP 2.8 that I can't type in numeric values if I want to scale/rotate/etc. a selection. I can use the mouse to manipulate my selection freely, but I'm pretty out of luck if I want an exact value (though I know that I can hold Ctrl for certain snapping, which is extremely useful).
View 1 Replies
View Related
Feb 4, 2013
When opening properties tab, I always trying to make my line scale value into decimal but i didn't know how to do with it.
View 6 Replies
View Related
Oct 24, 2011
I'm doing a 3ds max 2012 project and it has several text objects, I'd like to know if there is way to change their font type in one move, instead of changing one by one.
View 1 Replies
View Related
Apr 11, 2013
I have a problem with an old item I made in Max. In my newbishness I made an item that when exported (to OBJ) scales up to 10 times its original size.
Example: its 24cm in MAX
In VUE its 2.4 meters.
How do I 'reset' the scale, so that when it reads 2 meters in Max, it's 2 meters when I export it.
Obviously I made it incorectly in the first place, but dont want to remake it... There must be a way to sort this out no?
Hardware:
Intel Core i7-2600K @ 3.4GHz
16 GB Ram - ATI Radeon 6800
Software:
Windows 7 64bit
3DMax 2012
View 2 Replies
View Related
Jul 1, 2012
using ACADLT 2008
I wanted to use annotation scale objects long time ago, but I was scared…why?In the office no one knows what annotative objects are.
I already start to imagine the "curses" I'll get when they open my drawings in their computers and see that the dimensionin the drawing are not scaled the way they used to.
I was thinking about telling them a command that will do the magic.
View 5 Replies
View Related
May 9, 2013
I recall a scale command where you could SSX a set of objects and you could scale all of them at once and they were able to keep thier insertion point and all obects were scaled up or down, recall the command inside scale command?
View 2 Replies
View Related
Apr 18, 2011
I've just started creating my own dynamic blocks and if you could scale objects in one direction i.e. along X axis.
View 3 Replies
View Related
May 11, 2012
My question is, if there any tool /command, utility in autocad to select all objects of one type at one time : for example all text objects or all dimention objects if these objects on different layers and have different properties. in my work I have to insert many blocks(not annotative) or parts of drawings which were created by other people and have different from mine settings and properties of text and dimention objects. the insertions add so many layers and objects that I spend lots of time to correct them and to figure it out.
is there any way( command, utility) to select and manage all of these objects at one time?
P.S.i think it is very unconvenient that the plain autocad does not have dimentions and text as families or some sort of groups that s easy to manage.
View 1 Replies
View Related
Apr 9, 2012
Smart Objects previously created no longer scale properly. These objects have live type and vector shapes in them, but they behave just like raster elements. These objects scaled properly in the past, and I can only think a setting has broken somewhere.
I've tried restarting, trashing the prefs and creating a new object just to see what would happen, but to no avail...
View 1 Replies
View Related
Oct 7, 2010
I have a function that uses AcadApplication.ActiveDocument.SendCommand to allow the user to scale the inserted lines and text before the next step of the process, but AutoCAD does not display the scale prompt until after the entire program finishes. The prompt works well, but needs to be displayed before I end the sub.
How do I get the command to be sent immediately? Is there another way to allow users to scale the items I insert? The screen needs to be refreshed before the scale command is called, so that the lines and text I just added shows up. I have attached the code for the Send Command call and for the function that calls it.
View 5 Replies
View Related
Apr 15, 2013
I choose the vertical type tool or the vertical type on a path tool or the vertical area type tool...and all I get are letters that are rotated 90 degrees clockwise that go down in a vertical line. The effect is the same as if I took one of these lines that I am typeing here and rotated the entire line 90 degrees clockwise. That is not the effect I want. I am tying to get vertical letters stacked on top of one another in a line going vertical. I watched videos and they simply pick the tool and it functions this way, but when I pick the same tool I do not get this vertical orientation of the individual letters, but the 90 degree rotated letter.
View 5 Replies
View Related
Oct 9, 2013
I'm creating a large scale banner (12' by 8') which includes a photographic background image with vector based logo elements and typography on top of it.
I am creating the document in photoshop, and wanted to know if using Smart Objects is the best solution for placing the logo elements and typography, but I don't know how they will be affected when the image is scaled for printing.
View 4 Replies
View Related
