Illustrator :: CS5.5 Type Not Editable Not Selectable With Type Tool?
Jul 2, 2012
Working on a poster in Illustrator. Have added area type, using the type tool. Now I'd like to increase the size of one line. I can't select or edit any of the type with the type tool. I moved the type to a new layer, saved, closed Illustrator, restarted my Mac (OS X 10.7.4). Looked in preferences, in case there's an issue there. No luck.
Â
By the way, I also don't see handles when in the selection tool any more. Don't know if that's related.
I'm using AI CC now, but I noticed this problem in earlier versions of AI: If I want to place a one-word label on an illustration I move the type insertion cursor to a speific point on the screen image and click, but then the flashing insertion point, where the label will actually start, pops up elsewhere, usually a line or two above where the cursor was, and a pica or two to the left, forcing me to type the label, then move it into position rather than simply typing it in the right place and moving on. The problem is merely annoying, but I'd like to fix it. It's probably a matter of ignorance-I simply haven't read the right documentation, but I don't know what to call the problem. Where can I find out how to change the position of the cursor relative to the insertion point?
I want to create text on a circle path, so drew the circle, went to the "type on a path tool" and clicked on the circle. I keep getting the message "can't create type". I have tried to use the direct selection tool to select the circle first and without the direct selection.
My Type Tool does not select type by double clicking or click and drag. (Windows CS 5 V15.1). This is what I have tried so far and the problem still exists. Â Check preferences for "Text": "Select text-object by path only" should be off. Checked. It was off. Didn't fix it. Check the toggle for Show/Hide Edges in the View menu. Cmd(Ctrl)-H. Checked. Edges Showing. Didn't fix it. Trashed my Prefeerences. Didn't fix it.
I choose the vertical type tool or the vertical type on a path tool or the vertical area type tool...and all I get are letters that are rotated 90 degrees clockwise that go down in a vertical line. The effect is the same as if I took one of these lines that I am typeing here and rotated the entire line 90 degrees clockwise. That is not the effect I want. I am tying to get vertical letters stacked on top of one another in a line going vertical. I watched videos and they simply pick the tool and it functions this way, but when I pick the same tool I do not get this vertical orientation of the individual letters, but the 90 degree rotated letter.Â
the type tool won't let me insert any type whatsoever in JPG or PSD files. I click the type tool and then click somewhere on the image and all it gives me is a dot but no flashing cursor. As I said, resetting my prefs/settings while starting up Photoshop did not help. Another weird thing it does is that when I go to Canvas Size for a medium sized image, it says that the width is 588 inches and the height is 288 inches.
I keep having issues with the text tool so here is what i did. I opened a new document, clicked the "Type tool", drew a box with it and starting typing, now everything was working as it should, while typing when i would get to the right side of the "Type tool" box i had drawn, the text would stay within the box and the next line would begin sorte of like this (asume the imaginary box is four spaces long):  aaaa aaaa aaaa aaaa aaaa  But then i started to do the same thing later in the project and the text would stay on one line and just disappear when it got to the end of the box, and i dont know how to get it working like it did before. When reshaping the box the text would stay the same size (was not a point type problem) but the text would basically just run off the end of the box and disappear, here is an example using the same text i showed above, but i'll use "b" to simulate the last four "a" lines which in this case the "b"'s will represent the invisible "a"'s. In this case the box is still four spaces wide and 5 spaces in height, but the text does not seem to acknowledge the box. And member i'm only using the "type tool", to draw these boxes, i'm not acutally drawing square shapes. Also i'm using Illustrator CC, and am using a mac.
I am using Illustrator CC under a subscription on windows 8. When I go to use the type tool it does not type. I will click on it, create a box or double click to have the horizontal blinking text line show up. When it shows up this time it is a dot and does not show type on screen. So for example I would be sitting here typing this message, but you would not be able to read it as it does not show up on screen.
I got CS6 Design Standard and the default type tool is "Right-To-Left Type Tool". I don't see the way how to change it. I managed to change the default type face and language for new documents but the type tool is switching back to RTL no matter what. How to change this?
Is there a way to constrain with new Touch Type Tool? Â I'm looking to use it to kern by hand instead of click, click, clicking with the Option+Arrow keys. But there doesn't seem to be anything to constrain it. Shift doesn't work. I can't find the AI CC "Manual".
I have been working in In-design for my classes and everything is working fine. But recently I needed to do some work in Illustrator but when I opened the program up, some of my tools seems to be slightly bugged or something. Â The type tool will not make the anchor where I initially click. It creates the anchor around the center point of the type box. This is really annoying because if you have a specific grid, it will not line up to it. I have never adjusted this I don't think because now I have no clue on how to fix it! Â Also, my pen tool seems to be messed up. I first create the starting point, but then when I make the second point and try to drag out the node arms to make a curve, it only has one arm! Thus, the curve never is created, so I can't draw with the pen tool, therefore I fail my classes..
Is there a way to disable this function? Â I regularly have to edit text within a grid of lines in illustrator. I can replace/edit text zoomed out, but when I try the cursor automatically changes to the type on a path tool. I then have to zoom in, edit text, zoom back out thousands of times a day. It would save me a bunch of time if I could set the type tool to ignore paths and only select text. Â I could take the grid of lines on the files I'm working on and send them to back and lock them, but I am dealing with tens of thousands of files, and it's just not practical. Â Any way to get rid of type on a path, or at least prevent Illustrator from automatically switching to that tool when I hover the type tool over a path?
I've been working on several files for some package design. Every time I try to replace some text that happens to be sitting over a linked photo, illustrator freezes up and crashes. Every single time without fail, it fails. Â I tried to move the same piece of text off the artboard, modify it, and move it back, but it crashed even while off the board (and not on top of an image). Â I'm running Windows 7, up to date on all software (windows & adobe included). Using Illustrator cs6, 64bit. I'm running on a new machine as well - though I was having this issue on another computer as well.
Corel Draw 5 did this very nicely but it's obsolete and I can't load it onto this machine (HP all-in-one Pavilion desktop with Windows 8).  I am working with hand-drawn images but since I need to manipulate the outline/s with a 4 - 12 pixel tool, it would be great to just be editing nodes instead. Creating the image from scratch as a vector graphic would be a horrible large amount of work and is not feasible at this time. Is there any way other than Corel Draw 5 to make the conversion from bitmap-type images to editable vector graphics, ie: editable nodes?  PS - I don't have $700 - $1000 to spend on software at this point but do have Photoshop Elements 11, Premiere 11 and Lightroom, plus GIMP and the usual. Where should I start?
When I take the Type tool and draw a text box it simply draws a box with no fill or stroke and I can't type in it. When I simply click with the Type tool, a one-pixel dot appears and blinks like a input cursor, and when I type it blinks like it should be moving but it's not. I can't write any text whatsoever...
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
I want to put type on a perfect circular path.But first I need to stretch the type so it is longer vertically.Stretching type and using it as normal is easy.But how in the world do I use the stretched type on a path?
Illustrator CS4 Â I'm not exactly sure what happened, but suddenly my Type Tool can not select type by double clicking or click and drag any more. Â I'm using Illustrator CS4 (14.0.0) on a MacPro with OSX 10.6.8.
After selecting the area type tool, I try to click and drag but I get an error message: You must click on a non-compound, non-masking path to create text inside a path. This worked before but I must have screwed something up.Â
i used the word tool to type.. and then i saved my design in .psd format. Sometimes when i open that .psd file, i couldn't edit the word that i typed. y is that so? anywhere i go wrong?
I am working on a project which need a 200 points Type tool but when I hoppen the rol down arrow the maximum I have is 72pt. Is there a way to add points in this roll down arrow?
I hit 'F' twice to go 'Fullscreen'... then I hit 'Tab' to clear the palettes. From this point I decide to edit some text and hit the 'T' key to bring up the type tool..... with me so far?
I edit the text.... and then what??... how do I 'release' the type tool and allow others to be chosen?
there's no palettes to click because I've cleared them all.... All I have is the keyboard to tap on.
Currently I'm 'releasing' the type tool, by hitting 'Escape' ..... but then I lose all the new text I've produced....
I am having a very weird thing going on in Photoshop CS. Every time I turn on the type tool (horizontal) and try to use it, it won't type any letters, and instead when I strike the letter keys on my keyboard, it activates other tools based on their keyboard shortcut letters (such as L for lasso). I have tried resetting system defaults and still have this problem.
Another weird thing that happens is that when I try to type letters, the canvas turns pink, and the letters turn white (this might be connected to the keyboard shortcut for flood fill)
