Illustrator :: CS6 Crashes Every Time When Try To Use Type Tool Over Image?
Jun 21, 2012
I've been working on several files for some package design. Every time I try to replace some text that happens to be sitting over a linked photo, illustrator freezes up and crashes. Every single time without fail, it fails.
I tried to move the same piece of text off the artboard, modify it, and move it back, but it crashed even while off the board (and not on top of an image).
I'm running Windows 7, up to date on all software (windows & adobe included). Using Illustrator cs6, 64bit. I'm running on a new machine as well - though I was having this issue on another computer as well.
View 1 Replies
ADVERTISEMENT
May 16, 2012
Photoshop CS6 crashes all the time and especially when using the type tool.
View 36 Replies
View Related
May 18, 2012
Photoshop crashes every time I try to use the Liquify tool. Fairly problematic. I should have the latest drivers, which eliminates what might otherwise be the most likely cause. This happened during beta as well, but I chalked it up to it being a beta version. Did not happen with CS5.5 or previous.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 3093 MHz
Built-in memory: 8175 MB
Free memory: 6282 MB
Memory available to Photoshop: 7227 MB
Memory used by Photoshop: 60 %
[code]....
View 9 Replies
View Related
May 9, 2012
I've been using PS 12.0 for a year without incident. Recently I installed Superstition beta and started experiencing crashes both in 13beta and 12. I can consistently reproduce a crash in CS5, Win7 SP1, x64, by opening an existing PSD and then switching to the Type tool. The crash occurs before I even get to see the type tool. I've replaced the prefs a million times using the CTRL+ALT+SHIFT on launch technique.
I have not change type management (not using any font managers at this time). My nVidia drivers are up-to-date (dual 9800m GTX), my RAM is good.
View 14 Replies
View Related
Aug 26, 2012
So i hit the little "T" text tool, and i get the generic Windows 7 "This program has encountered a program and needs to close" error. I click out of the error box, and all my work disappears as well as any changed preferences and recently opened files. The same happens when i try to use Image> Adjustments>HDR Toning. Yay. And what's funny is BOTH errors display a fault module of "CoolType.dll."
I have tried EVERYTHING that everyone has posted about on every computer-related forum that i could find. NOTHING has worked at all. I deleted every single font minus the system fonts, including anything mentioning them in the system registry. Tried new copy of the dll file, nothing. Reset Photoshop preferences, nothing. System restore failed. Uninstall/reinstall of entire Adobe Master Collection failed.
Oh, and in the 32-bit version, HDR Toning works but the text tool gives me an error message that "something prevented the text engine from being initialized." And, well, i just don't want to use the 32-bit version.
View 42 Replies
View Related
Feb 11, 2014
I'm using AI CC now, but I noticed this problem in earlier versions of AI: If I want to place a one-word label on an illustration I move the type insertion cursor to a speific point on the screen image and click, but then the flashing insertion point, where the label will actually start, pops up elsewhere, usually a line or two above where the cursor was, and a pica or two to the left, forcing me to type the label, then move it into position rather than simply typing it in the right place and moving on. The problem is merely annoying, but I'd like to fix it. It's probably a matter of ignorance-I simply haven't read the right documentation, but I don't know what to call the problem. Where can I find out how to change the position of the cursor relative to the insertion point?
View 2 Replies
View Related
Apr 29, 2013
I want to create text on a circle path, so drew the circle, went to the "type on a path tool" and clicked on the circle. I keep getting the message "can't create type". I have tried to use the direct selection tool to select the circle first and without the direct selection.
View 3 Replies
View Related
Mar 18, 2013
My Type Tool does not select type by double clicking or click and drag. (Windows CS 5 V15.1). This is what I have tried so far and the problem still exists.
Check preferences for "Text": "Select text-object by path only" should be off. Checked. It was off. Didn't fix it.
Check the toggle for Show/Hide Edges in the View menu. Cmd(Ctrl)-H. Checked. Edges Showing. Didn't fix it.
Trashed my Prefeerences. Didn't fix it.
View 6 Replies
View Related
Oct 12, 2012
I installed a bunch of fonts and ever since then Photoshop has been crashing when the font preview menu is accessed with the type tool. So I deleted all fonts except for the required system fonts I believe. But it still crashes when I access the font preview menu. I can't provide a crash log now.
View 13 Replies
View Related
Jul 2, 2012
Working on a poster in Illustrator. Have added area type, using the type tool. Now I'd like to increase the size of one line. I can't select or edit any of the type with the type tool. I moved the type to a new layer, saved, closed Illustrator, restarted my Mac (OS X 10.7.4). Looked in preferences, in case there's an issue there. No luck.
By the way, I also don't see handles when in the selection tool any more. Don't know if that's related.
View 2 Replies
View Related
Feb 12, 2013
Windows 7 SP1, Illustrator CS6.The end users spends 7 hours of their 8 hours in Illustrator. As part of the job, they have to have over 40 different files open at the same time because they are working on several jobs at the same time as well as working forward. So the answer is not "they have to close some files". This, unfortunately, is not an option. We recently upgraded them to CS6. They said that version CS5 was fine and didn't crash like this. But Illustrator CS6 crashes on them, closes itself, and obviously they lose all unsaved changes (saving the changes isn't a choice either, because the files are shared and have to stay original).The only modification we've done to the program is to UNcheck "Append" in the preferences.This happens on all 3 computers for all 3 users, so I don't believe it to be end-user related. Any way to get Illustrator to stop crashing?Is there a specific limit on the number of files that can be open?
View 4 Replies
View Related
Nov 12, 2013
Corel photopaint crashes each time you try to save an image with W 8.1
View 2 Replies
View Related
Aug 9, 2012
ive just got illustrator and it crashes everytime i click it?
View 3 Replies
View Related
Sep 18, 2013
Illustrator CC keeps crashing every time I try to save a file. My Creative Cloud is up to date, and I have a brand new iMac with 8GB Ram and the latest operating system. The average file size I've been working with is around 4MB, so not very big. I also make sure that I have as few programs opened as possible while I'm working in AI.
I've been talking to Apple Care every week, and even went back to the store to change my computer for a new one, but am still having problems.
View 6 Replies
View Related
Feb 12, 2011
I have been working in In-design for my classes and everything is working fine. But recently I needed to do some work in Illustrator but when I opened the program up, some of my tools seems to be slightly bugged or something.
The type tool will not make the anchor where I initially click. It creates the anchor around the center point of the type box. This is really annoying because if you have a specific grid, it will not line up to it. I have never adjusted this I don't think because now I have no clue on how to fix it!
Also, my pen tool seems to be messed up. I first create the starting point, but then when I make the second point and try to drag out the node arms to make a curve, it only has one arm! Thus, the curve never is created, so I can't draw with the pen tool, therefore I fail my classes..
View 11 Replies
View Related
Apr 15, 2013
I choose the vertical type tool or the vertical type on a path tool or the vertical area type tool...and all I get are letters that are rotated 90 degrees clockwise that go down in a vertical line. The effect is the same as if I took one of these lines that I am typeing here and rotated the entire line 90 degrees clockwise. That is not the effect I want. I am tying to get vertical letters stacked on top of one another in a line going vertical. I watched videos and they simply pick the tool and it functions this way, but when I pick the same tool I do not get this vertical orientation of the individual letters, but the 90 degree rotated letter.
View 5 Replies
View Related
Mar 29, 2012
when i bring a image in and use zoom tool i lose pic and have to zoom a few more times to get image back is their away to keep the image from disappearing every time u use the zoom tool?
View 1 Replies
View Related
Mar 9, 2014
I keep having issues with the text tool so here is what i did. I opened a new document, clicked the "Type tool", drew a box with it and starting typing, now everything was working as it should, while typing when i would get to the right side of the "Type tool" box i had drawn, the text would stay within the box and the next line would begin sorte of like this (asume the imaginary box is four spaces long):
aaaa
aaaa
aaaa
aaaa
aaaa
But then i started to do the same thing later in the project and the text would stay on one line and just disappear when it got to the end of the box, and i dont know how to get it working like it did before. When reshaping the box the text would stay the same size (was not a point type problem) but the text would basically just run off the end of the box and disappear, here is an example using the same text i showed above, but i'll use "b" to simulate the last four "a" lines which in this case the "b"'s will represent the invisible "a"'s. In this case the box is still four spaces wide and 5 spaces in height, but the text does not seem to acknowledge the box. And member i'm only using the "type tool", to draw these boxes, i'm not acutally drawing square shapes. Also i'm using Illustrator CC, and am using a mac.
View 3 Replies
View Related
Mar 20, 2014
I am using Illustrator CC under a subscription on windows 8. When I go to use the type tool it does not type. I will click on it, create a box or double click to have the horizontal blinking text line show up. When it shows up this time it is a dot and does not show type on screen. So for example I would be sitting here typing this message, but you would not be able to read it as it does not show up on screen.
View 1 Replies
View Related
Nov 17, 2013
Why does my image turn black when trying to use the type tool? It won't go away until I change to another tool.
View 3 Replies
View Related
Nov 27, 2012
When using the rotate tool, you used to be able to use the hand tool even when the Rotate dialogue box was up. Is there a way to get that back?
I make Mandalas [URL] and work from the center out. This poster is 18"x24" so once I start to get to the outer edge, I'm zoomed into the center at 6400% so I can get my crosshairs as precise as I can, then enter a number (45 degrees, 20 degrees, etc.). Clicking Preview works, but if you're zoomed in and the object is out of view, you have to guess where it's going. In CS5, you could press down the space bar and use the Hand Tool even while the dialog box was up.
View 8 Replies
View Related
Jul 27, 2013
This function was supposed to be available mid-June. Still, it isn't available or showing in my Illustrator CC, in the "T" type options.
View 3 Replies
View Related
Mar 13, 2013
I got CS6 Design Standard and the default type tool is "Right-To-Left Type Tool". I don't see the way how to change it. I managed to change the default type face and language for new documents but the type tool is switching back to RTL no matter what. How to change this?
View 6 Replies
View Related
Jun 18, 2013
Is there a way to constrain with new Touch Type Tool?
I'm looking to use it to kern by hand instead of click, click, clicking with the Option+Arrow keys. But there doesn't seem to be anything to constrain it. Shift doesn't work. I can't find the AI CC "Manual".
View 2 Replies
View Related
Feb 13, 2014
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies
View Related
Jul 17, 2013
When I create a text layer, the whole image turns black. If I enter the text blindly, I will see the expected results when I finish and click on another tool. If I try to edit the text layer, everything turns black again.
I am not using the type mask tool. I can select and move the layer and I can blend the layer; I just can't see what I am typing. Using Windows 8
View 1 Replies
View Related
Oct 3, 2013
I just started using illustrator CC and realize that when I clcik Transform tool button, the program crashes. It shappens even if no document is open.
I am using a mac with OS 10.7.
View 3 Replies
View Related
Feb 1, 2014
I need to know how to make the type tool take the shape of the ellipse I am typing in.
View 1 Replies
View Related
Mar 27, 2013
Is there a way to disable this function?
I regularly have to edit text within a grid of lines in illustrator. I can replace/edit text zoomed out, but when I try the cursor automatically changes to the type on a path tool. I then have to zoom in, edit text, zoom back out thousands of times a day. It would save me a bunch of time if I could set the type tool to ignore paths and only select text.
I could take the grid of lines on the files I'm working on and send them to back and lock them, but I am dealing with tens of thousands of files, and it's just not practical.
Any way to get rid of type on a path, or at least prevent Illustrator from automatically switching to that tool when I hover the type tool over a path?
View 4 Replies
View Related
May 6, 2013
Today Illustrator CS4 decided to start crashing on me when I try to paste text into the art board. It will also not allow me to type text into the artboard. Whenever I try to type, it just does all the tool shortcuts. I have alread tried deleting the preferences and that hasn't worked at all.
View 1 Replies
View Related
Feb 18, 2013
When i using a Type tool always showing a dark background so i can't see any text
View 3 Replies
View Related
