I have been working in In-design for my classes and everything is working fine. But recently I needed to do some work in Illustrator but when I opened the program up, some of my tools seems to be slightly bugged or something.
The type tool will not make the anchor where I initially click. It creates the anchor around the center point of the type box. This is really annoying because if you have a specific grid, it will not line up to it. I have never adjusted this I don't think because now I have no clue on how to fix it!
Also, my pen tool seems to be messed up. I first create the starting point, but then when I make the second point and try to drag out the node arms to make a curve, it only has one arm! Thus, the curve never is created, so I can't draw with the pen tool, therefore I fail my classes..
I have a shape in illustrator CS6 that I'm trying to edit. When I try to click on a point with the Delete Anchor Point Tool nothing happens however I am able to select the point using the Direct Selection Tool and then remove it using the "Remove selected anchor points" option in the Control palette. Same issue with trying to use the Convert Anchor Point Tool.
I wonder if there's an easy way to have the result just as if I used scissors tool on every anchor of a path. Clicking on every anchor is a tiresome labor.
I'm using AI CC now, but I noticed this problem in earlier versions of AI: If I want to place a one-word label on an illustration I move the type insertion cursor to a speific point on the screen image and click, but then the flashing insertion point, where the label will actually start, pops up elsewhere, usually a line or two above where the cursor was, and a pica or two to the left, forcing me to type the label, then move it into position rather than simply typing it in the right place and moving on. The problem is merely annoying, but I'd like to fix it. It's probably a matter of ignorance-I simply haven't read the right documentation, but I don't know what to call the problem. Where can I find out how to change the position of the cursor relative to the insertion point?
I want to create text on a circle path, so drew the circle, went to the "type on a path tool" and clicked on the circle. I keep getting the message "can't create type". I have tried to use the direct selection tool to select the circle first and without the direct selection.
My Type Tool does not select type by double clicking or click and drag. (Windows CS 5 V15.1). This is what I have tried so far and the problem still exists.
Check preferences for "Text": "Select text-object by path only" should be off. Checked. It was off. Didn't fix it. Check the toggle for Show/Hide Edges in the View menu. Cmd(Ctrl)-H. Checked. Edges Showing. Didn't fix it. Trashed my Prefeerences. Didn't fix it.
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
I have read several Pen tool tutorials but haven't found anything about this:
If I draw a path with the pen tool and later want to reactivate it, clicking the last anchro point to make the path active severs one of its control handles. Specifically the handle that is for the curve that is yet to be drawn. And after that I have to use the Convert Anchor Point tool to recreate both control handles and try to math the already existing one to its former place.
Working on a poster in Illustrator. Have added area type, using the type tool. Now I'd like to increase the size of one line. I can't select or edit any of the type with the type tool. I moved the type to a new layer, saved, closed Illustrator, restarted my Mac (OS X 10.7.4). Looked in preferences, in case there's an issue there. No luck.
By the way, I also don't see handles when in the selection tool any more. Don't know if that's related.
I keep having issues with the text tool so here is what i did. I opened a new document, clicked the "Type tool", drew a box with it and starting typing, now everything was working as it should, while typing when i would get to the right side of the "Type tool" box i had drawn, the text would stay within the box and the next line would begin sorte of like this (asume the imaginary box is four spaces long):
aaaa aaaa aaaa aaaa aaaa
But then i started to do the same thing later in the project and the text would stay on one line and just disappear when it got to the end of the box, and i dont know how to get it working like it did before. When reshaping the box the text would stay the same size (was not a point type problem) but the text would basically just run off the end of the box and disappear, here is an example using the same text i showed above, but i'll use "b" to simulate the last four "a" lines which in this case the "b"'s will represent the invisible "a"'s. In this case the box is still four spaces wide and 5 spaces in height, but the text does not seem to acknowledge the box. And member i'm only using the "type tool", to draw these boxes, i'm not acutally drawing square shapes. Also i'm using Illustrator CC, and am using a mac.
I am using Illustrator CC under a subscription on windows 8. When I go to use the type tool it does not type. I will click on it, create a box or double click to have the horizontal blinking text line show up. When it shows up this time it is a dot and does not show type on screen. So for example I would be sitting here typing this message, but you would not be able to read it as it does not show up on screen.
I got CS6 Design Standard and the default type tool is "Right-To-Left Type Tool". I don't see the way how to change it. I managed to change the default type face and language for new documents but the type tool is switching back to RTL no matter what. How to change this?
Is there a way to constrain with new Touch Type Tool?
I'm looking to use it to kern by hand instead of click, click, clicking with the Option+Arrow keys. But there doesn't seem to be anything to constrain it. Shift doesn't work. I can't find the AI CC "Manual".
When using the blend tool to blend colour between two objects is there a way to see the anchor points so I know where to click the blend tool. I realise the cursor changes when over one but its seems very cumbersome to have to move it around until it changes rather than click directly on one which I could do if I could see it.
I regularly have to edit text within a grid of lines in illustrator. I can replace/edit text zoomed out, but when I try the cursor automatically changes to the type on a path tool. I then have to zoom in, edit text, zoom back out thousands of times a day. It would save me a bunch of time if I could set the type tool to ignore paths and only select text.
I could take the grid of lines on the files I'm working on and send them to back and lock them, but I am dealing with tens of thousands of files, and it's just not practical.
Any way to get rid of type on a path, or at least prevent Illustrator from automatically switching to that tool when I hover the type tool over a path?
I've been working on several files for some package design. Every time I try to replace some text that happens to be sitting over a linked photo, illustrator freezes up and crashes. Every single time without fail, it fails.
I tried to move the same piece of text off the artboard, modify it, and move it back, but it crashed even while off the board (and not on top of an image).
I'm running Windows 7, up to date on all software (windows & adobe included). Using Illustrator cs6, 64bit. I'm running on a new machine as well - though I was having this issue on another computer as well.
I choose the vertical type tool or the vertical type on a path tool or the vertical area type tool...and all I get are letters that are rotated 90 degrees clockwise that go down in a vertical line. The effect is the same as if I took one of these lines that I am typeing here and rotated the entire line 90 degrees clockwise. That is not the effect I want. I am tying to get vertical letters stacked on top of one another in a line going vertical. I watched videos and they simply pick the tool and it functions this way, but when I pick the same tool I do not get this vertical orientation of the individual letters, but the 90 degree rotated letter.
When I take the Type tool and draw a text box it simply draws a box with no fill or stroke and I can't type in it. When I simply click with the Type tool, a one-pixel dot appears and blinks like a input cursor, and when I type it blinks like it should be moving but it's not. I can't write any text whatsoever...
I was just working with the pen tool in Photoshop CS6, and unexplainable the anchor points changed from being circles to being squares. How I did it or how to reverse it. What with all the keyboard shortcuts it's possible that I accidentally hit the keystrokes to change it (as I have done it in the past), however I have been unable to find exactly why or how I made this change.
Screenshot for visualization of the issue: [URL].......
how to do selection with the pen tool. I have made my anchor points and connected the path. But, I need to go back and move the anchor points and mess with the angels a bit. I know I need to push CTRL and the anchor points and handle bar to make these changes , but not sure how to make the points and handle bars show up again,
I've been using the pen tool for almost a month now… I'm actually getting pretty good with it now, mainly using it to make my selections more precise… I haven't even bothered to try to draw with it, yet…
Anyway, I was already kind of sleepy when I started to outline the chopper with the pen tool… I got pretty tired & saved what I have done into a PSD. In Illustrator I know it would probably save my anchor points…
When I click on my Path palette, I can see some of my outline… But, the rest of it is filled in with white as a shape…With all of that said, in Photoshop… Is there anyway I can pick up where I left off tracing the nice Harley-Davidson?
Or… Do I have to start all over?
I already tried to use the Direct Path tool & Direct Selection Tool… My anchor points remain hidden.
I don't understand if the problem is the same of this: [URL]
Any way i do not understand with after using -convert point tool- the tool -Direction tool- (2) do not leave me to manage both the direction handles (3). I try to upload a screenshot:
(1): how work Direction tool (it moves both the direction handles).
I have drawn a shape using the Paintbrush tool's new smooth fidelity with a 3 pt stroke. But when I go to use the Varible Width tool it want allow me to modify the line.
