When using the blend tool to blend colour between two objects is there a way to see the anchor points so I know where to click the blend tool. I realise the cursor changes when over one but its seems very cumbersome to have to move it around until it changes rather than click directly on one which I could do if I could see it.
View 2 RepliesI'm using Illustrator CC (on a Win7 Pro machine) at a beginner level, probably halfway to intermediate. I'm trying to learn how to blend colors together for highlights of various types (skin tones, clothing, light on objects, etc.) so that when I'm making a graphic for a project I'll have a decent idea of which tool/technique is best for the specific effect I need.
I'm trying to use the Smooth Color option in the blend tool. Late yesterday afternoon I recall creating two ellipses (one of which was a solid fill and one of which was a gradient going from black to transparent) and getting a smooth color transition between the two. It was a much harsher effect than I was looking for so I didn't keep it. This morning, while trying to replicate the same thing, I seem to be unable to use smooth color between two objects if one or more of them has a gradient applied. I only get what you see below, which is a step between the two objects.
I've done searches and found multiple references to blending gradients in this way and have followed those instructions (create the shapes, fill with the gradients, then either click on the Blend tool and click on the center of each shape, or click on Object -> Blend -> Make) but I can't seem to get a Smooth Color blend if either object has a gradient applied. Am I missing an important step somewhere? I'm 95% sure I accomplished it yesterday and nothing has been changed since then.
I am trying to blend two different art brushes with different colors using the blend tool. I'm trying to use two fixed-size line segments of the same length and then applying the two different brushes to those segments ( each art brush is a different color). Then I want to blend them the regular way so their colors transition. However, when I do this, the first shape is a different color, but all subsequent blend steps are the color of the second blended shape. Why is this? It doesn't blend the colors for some reason.
View 4 Replies View RelatedI would like to animate a serie of objects I made with the blend tool in Illustrator. It is an object that transforms into another one, I am trying to put this into a small animation like a gif.
I have also Photshop but I know better Illustrator, so I tried to export each of these objects in separate jpg files
but couldnt find a way.
I have a series of colored rectangles I'd like to blend into a single rectangle with a smooth blend of the colors, like a rainbow or spectrum.
View 1 Replies View RelatedI am trying to blend two AIArt objects (two rectangles created using kPathArt type), but obviously I am not able to identify appropriate SDK functions. I need to accomplish the same result with SDK as I would with manually selecting these two rectangles and applying Object -> Blend -> Make.
View 4 Replies View RelatedI have been having issues with using the blend tool on my object. If you look at the picture, I had one outer shape that was what I wanted shaded and a thinner shape that runs inside the other. It blends perfectly fine everywhere except at the bottom. I don't know how to explain it or what went wrong but I can't figure out how to make the blend fit inside the shape.
View 7 Replies View Relatedim having trouble getting the fillet edge command to work. Ive never had a problem with it before but now i get <Modeling Operation Error:
geometry or topology at end of blend too complex Failed to perform blend.Failure while filleting.>
why its not working.
I am having diffuculty with the blend tool! I tried to upload the image but it said it was't allowed. Not sure how to correctly explain the problem but I'll do my best. I am have trouble getting the blend tool to recognize the images. I can only select the very edge of the images and then it doesn't look like it should when it does blend. How I can upload the file to show what I am trying to say?
View 3 Replies View RelatedHere's a screen shot to show what I mean. I tried to create this smaller box off of the anchor point of the larger box.
Currently usuing AI CS6 on a mac running osx 10.6.8
I am using CS and the “blend” tool to create a train track but I cannot seem to get the spacing to look right. I tried adding a 3rd railroad tie in the middle but that didn’t work either. How I can get more spacing in the foreground and less in the distance?
View 8 Replies View RelatedWhen I use the blend tool for a smooth blend, the blends comes out jagged and horrible, as if it is doing a step blend rather than a smooth blend. I have used the tool before by either using the shortcut (Alt+Ctrl+B) or using it via the Object>Blend pathway and it worked out fine, but now Illustrator doesn't want to create a smooth blend.
What I'm trying to say is; is there an option that is causing this to happen that I may have accidently turned on, or has my copy of Illustrator gone into stupidity mode and I need to reinstall it?
I've attached pictures of what I mean with the settings I'm using and outputs. I hope your collective minds can smack this one in the face. I'm sure I'm doing something ridiculously simple to cause this.
I'm using CS5 Illustrator and my relevant PC hardware is listed below. - Intel i5-2500 3.30Ghz
- nVidia GeForce GTX 560
I have a shape in illustrator CS6 that I'm trying to edit. When I try to click on a point with the Delete Anchor Point Tool nothing happens however I am able to select the point using the Direct Selection Tool and then remove it using the "Remove selected anchor points" option in the Control palette. Same issue with trying to use the Convert Anchor Point Tool.
View 7 Replies View RelatedHow do I fix this? I've gone through view settings so far, without success.
View 1 Replies View RelatedI have "group1" and inside that group, only one layer: "layer1". The blending mode for "group1" is vivid light and for "layer1" it's "normal".
Now, if I change "group1" to "pass through" and "layer1" to "vivid light" ... the result is completely different, while it should be the same, shouldn't it?
I am trying to acheive the same angle gradient effect that can be done in Photoshop but in Illustrator. The actual thing I want to be able to create as a vector is the graphic attached...
Can this be done by somehow using the blend tool and replacing the spline with a circle?
I have 10 layers and I want to blend them such that the resultant flattened image represents the average colour. i.e. If layer 1 has a white pixel and layers 2-10 have black pixels the result will be 90% black.
View 9 Replies View RelatedWhen I try to interactively blend two objects i don't get any step objects. Shouldn't there be repetition of objects between the two that I want to blend? Am I making any sense?
View 2 Replies View RelatedI'm just wondering if there's some function to add an anchor point on a path between (exactly in the middle) two anchor points. Like Object > Path > Add Anchor Points, except only between two selected anchor points.
I'm using Illustrator CC (17.1) on a Mac.
I'm rigging a character for use in Maya 2011, which I'm not all too familiar with - How would I link the blend shape states for 2 objects, so when I increase the value of one blend shape for one object, it increases the value for another blend shape for another object?
I have a blend shape for the mouth open position & I need the teeth & tongue open blends to match as the value increases.
In 3DS Max I'd use the reaction manager - is there something similar for Maya?
I'm learning to use Coreldraw for artistic metal cutting using a plasma cutter, so the file itself is important and not just what appears on the screen (or what prints out).
I've used the blend tool to draw some circles along a wavy path. I want the circles but I don't want the path. I remove the outline and the path dissappears on the screen but it's still in the file and when I export as a dxf file there is the path cutting right through the circles.
If I use Detach from Path then the circles simple come of my wavy path and end up in a straight line.
Are there any other techniques to give the same result but one where I can keep the circles/objects in their locations while removing the path at file level.
I know of a plugin available for Coreldraw that can take a bunch of dissimilar objects and place them on a path but at this point don't know if it can do what I need and delete the path afterwards.
Or is there any way I can copy the circles without copying the path.
I have Xara Web Designer 6 currently at work.
I know where to get the button palette and how to add items to the control bars.
But, I cannot find the Blend tool, was this tool removed? Where can i find and add it?
I am trying to use the break apart blend tool and every time it says corel has a problem & shuts down my X4?
View 5 Replies View RelatedI want to take a photograph and have it go from transparent to solid opacity. I believe the gradient tool can do that (maybe) but I don't want any color, just have the transparent blend to solid.
View 3 Replies View RelatedI'm trying to blend a couple of images together using the gradient tool.
I moved one image to the other using the move tool, I then added Layer Mask (in the layers palette), i then got my gradient tool and selected black,white.....I used the gradient tool on the left side of the image and it blended beautifully.
So, now that the left side is blended nicely, I attempt to blend the right side. The right side blends very nice.....but my left side went back to where it was originally.
How do I blend multiple sides of the image?
For example take this tutorial and look at step 2:
[URL].....
I tried view snap to grid, but this only affects the end selection of blend tool and not the start.
Vista 32 bit SP2CorelDraw 6.2
How to reproduce the error:
Create a new document.Convert it to 48 Bit RGB mode.Fill the document with any colour.Create a new object and use a brush to apply some contrasting colour.Select the Blend tool and try to blend with it.On my machine the cursor will draw black instead of blending.
When I copy a selection from one image to another, I can't select the feather tool to blend it in the new image (it's greyed out). I have to first anchor the layer, then use the paths tool to re-select the pasted portion again, then feather. Is there another way?
Update: Looks like I can feather before copying/pasting the selection.
I was just working with the pen tool in Photoshop CS6, and unexplainable the anchor points changed from being circles to being squares. How I did it or how to reverse it. What with all the keyboard shortcuts it's possible that I accidentally hit the keystrokes to change it (as I have done it in the past), however I have been unable to find exactly why or how I made this change.
Screenshot for visualization of the issue: [URL].......
how to do selection with the pen tool. I have made my anchor points and connected the path. But, I need to go back and move the anchor points and mess with the angels a bit. I know I need to push CTRL and the anchor points and handle bar to make these changes , but not sure how to make the points and handle bars show up again,
View 4 Replies View RelatedI would like to add my bottom logo (in black) to the curve I have drawn (in black).
ignore the yellow lines and existing chrome 'precise formwork ltd'.
I will need to resize the logo 'precise formwork ltd' (in black) to match similar size to the chrome photo behind with opacity turned down.
How can I align the top of my ruler markings to the black path? I have tried object > blend > replace spine but the option is not selectable.
I tried object > make with warp which is working well, however I will have to guess co-ordinates all night and will never be perfect;