I am trying to acheive the same angle gradient effect that can be done in Photoshop but in Illustrator. The actual thing I want to be able to create as a vector is the graphic attached...
Can this be done by somehow using the blend tool and replacing the spline with a circle?
I've tried replacing a blend spline with a circle in order to get an easily editable "flowering effect" but it's not working out.
The blend does accept the circle as its new spline, but the start object and end object aren't distributed along the circle equally. The Blend only travels around the circle 270 degrees.
Is there a trick to making this work?
About a year ago I created this picture using gimp (ignore the text) .
My problem is that I have completely forgotten how I did it and now I need to know how.
So how to create the blend effect in the upper right of the circle (again don't worry about the text)?
When using the blend tool to blend colour between two objects is there a way to see the anchor points so I know where to click the blend tool. I realise the cursor changes when over one but its seems very cumbersome to have to move it around until it changes rather than click directly on one which I could do if I could see it.
View 2 Replies View RelatedI was making a website and I wanted to make a pattern that looks like one color turning into another color by way of small circles increasing in size. I've created a small mock-up of the type of effect that I want to make, and what is the name of the effect, or how to do it. But for some reason it doesn't let me post the image.
View 2 Replies View RelatedI'm using Illustrator CC (on a Win7 Pro machine) at a beginner level, probably halfway to intermediate. I'm trying to learn how to blend colors together for highlights of various types (skin tones, clothing, light on objects, etc.) so that when I'm making a graphic for a project I'll have a decent idea of which tool/technique is best for the specific effect I need.
I'm trying to use the Smooth Color option in the blend tool. Late yesterday afternoon I recall creating two ellipses (one of which was a solid fill and one of which was a gradient going from black to transparent) and getting a smooth color transition between the two. It was a much harsher effect than I was looking for so I didn't keep it. This morning, while trying to replicate the same thing, I seem to be unable to use smooth color between two objects if one or more of them has a gradient applied. I only get what you see below, which is a step between the two objects.
I've done searches and found multiple references to blending gradients in this way and have followed those instructions (create the shapes, fill with the gradients, then either click on the Blend tool and click on the center of each shape, or click on Object -> Blend -> Make) but I can't seem to get a Smooth Color blend if either object has a gradient applied. Am I missing an important step somewhere? I'm 95% sure I accomplished it yesterday and nothing has been changed since then.
I want to take a photograph and have it go from transparent to solid opacity. I believe the gradient tool can do that (maybe) but I don't want any color, just have the transparent blend to solid.
View 3 Replies View RelatedI'm trying to blend a couple of images together using the gradient tool.
I moved one image to the other using the move tool, I then added Layer Mask (in the layers palette), i then got my gradient tool and selected black,white.....I used the gradient tool on the left side of the image and it blended beautifully.
So, now that the left side is blended nicely, I attempt to blend the right side. The right side blends very nice.....but my left side went back to where it was originally.
How do I blend multiple sides of the image?
I am trying to blend two different art brushes with different colors using the blend tool. I'm trying to use two fixed-size line segments of the same length and then applying the two different brushes to those segments ( each art brush is a different color). Then I want to blend them the regular way so their colors transition. However, when I do this, the first shape is a different color, but all subsequent blend steps are the color of the second blended shape. Why is this? It doesn't blend the colors for some reason.
View 4 Replies View RelatedIf I copy/paste a gradient filled object between two Illustrator CS6 documents, the gradient becomes a blend. This doesn't happen however if just drag the object from one open document to another.
Is there a way to correct this copy/paste behaviour?
I am creating a shape that looks like a pill a rectangle with two circles on the ends, if you will. But it's all one shape. I want a gradient or blend (what exactly is the differnce?) that has a white middle and dark gray edges. The white goes along the pill horizontally but the dark gray is above and below this white "line" but the rounded edges of the pill shape are the dark gray. I'm using CS6.
View 3 Replies View RelatedI want to rotate object along circle with special step angle. If i choose TRANSFORM i don't type special angle, but i can choose pivot point. I don't know how name this point, i name this pivot point, the point concerning which object rotates. And if i choose TRANSFORM OPTION i can type special angle, but i can't choose pivot point. More precisely, i don't know how do that. I choose object, then transform, set pivot and then open pivot option, type angle but object rotate around own pivot!!!
View 2 Replies View RelatedSuppose I have an object filled with a linear gradient. This object is the only selected. I just would like to change the angle of the gradient to 25 degrees. So I think I could do:
var doc = app.activeDocument
alert(doc.selection[0].fillColor.angle) // the result is the exact angle of the gradient fill of the selected object. Suppose 12 degrees.
//now the try to change:
doc.selection[0].fillColor.angle = 25.0
No errors are found by the Extended Script Toolkit..BUT...it does not change anything. As Illustrator reference manual does not say this property is read only, I think I could write.
Almost every time I add a linear gradient to an object I want to change the angle from 0 to 90 degrees.
Is there a script that I could use for this, so that I could assign a keyboard shortcut and press that instead of clicking the box & typing 90 all the time? (i.e. select an object, run a script & it would apply the standard black to white linear gradient at 90 degrees instead of 0.)
The depth of field tool is not working in my copy of Elements 12. Trying to use "Simple" mode after having sucess using this on a friends computor. I can add blur but the gradient tool has no effect??
View 4 Replies View RelatedI have been having issues with using the blend tool on my object. If you look at the picture, I had one outer shape that was what I wanted shaded and a thinner shape that runs inside the other. It blends perfectly fine everywhere except at the bottom. I don't know how to explain it or what went wrong but I can't figure out how to make the blend fit inside the shape.
View 7 Replies View RelatedI am having diffuculty with the blend tool! I tried to upload the image but it said it was't allowed. Not sure how to correctly explain the problem but I'll do my best. I am have trouble getting the blend tool to recognize the images. I can only select the very edge of the images and then it doesn't look like it should when it does blend. How I can upload the file to show what I am trying to say?
View 3 Replies View RelatedWhen I try to copy an object in illustrator which has gradient effect in it, gradient changes in the next copied object. how to overcome this issue.
View 6 Replies View RelatedI am using CS and the “blend” tool to create a train track but I cannot seem to get the spacing to look right. I tried adding a 3rd railroad tie in the middle but that didn’t work either. How I can get more spacing in the foreground and less in the distance?
View 8 Replies View RelatedI would like to animate a serie of objects I made with the blend tool in Illustrator. It is an object that transforms into another one, I am trying to put this into a small animation like a gif.
I have also Photshop but I know better Illustrator, so I tried to export each of these objects in separate jpg files
but couldnt find a way.
When I use the blend tool for a smooth blend, the blends comes out jagged and horrible, as if it is doing a step blend rather than a smooth blend. I have used the tool before by either using the shortcut (Alt+Ctrl+B) or using it via the Object>Blend pathway and it worked out fine, but now Illustrator doesn't want to create a smooth blend.
What I'm trying to say is; is there an option that is causing this to happen that I may have accidently turned on, or has my copy of Illustrator gone into stupidity mode and I need to reinstall it?
I've attached pictures of what I mean with the settings I'm using and outputs. I hope your collective minds can smack this one in the face. I'm sure I'm doing something ridiculously simple to cause this.
I'm using CS5 Illustrator and my relevant PC hardware is listed below. - Intel i5-2500 3.30Ghz
- nVidia GeForce GTX 560
I am trying to make a shape made from the blob tool made into hafltones. I do not want it as a gradient, just equal sized halftones throughout the shape. Is this possible?
When I do it using Effects/pixilate/color haltone it makes multiple colored halftones, whereas I just want one color. And when I change the channel's it comes up with similar results.
The rectangle tool is drawing at 90 degrees. I tried to fix it with the preferences>general>constrain angle, but I see that is ALREADY set to 0 degrees, yet the rectangle is 90 degrees! Is there another setting I should be aware of?
View 25 Replies View Relatedi am colourwashing a site plan for presentation purposes.
how can i blend within the green circles, as shown on the trees on the attached part site plan?
I am a graphic designer I like to work hand and not numbers. The new version of Ai CS6 gradients can be given for strokes. Great!
How exactly I can do it with a convenient tool 'Gradient Tool'?
Does not respond to changes in drag when I try to use the mouse to outline?
In advertising and instructions CS6 somehow strange is described ... I do not understand. [URL]
I have a series of colored rectangles I'd like to blend into a single rectangle with a smooth blend of the colors, like a rainbow or spectrum.
View 1 Replies View RelatedMy Gradient Tool no longer shows the Gradient Tool Annotator over a selected object. Did I turn something off that I don't know about? Recently updated my CS5 version to try and fix but no luck.
View 2 Replies View RelatedRecently, I started using Adobe Illustrator and watched many tutorials for the basics of it (coming from Photoshop) but one thing that I'm not too comfortable with is the gradient tool in Illustrator compared to the one in Photoshop.
I keep reading that the only way to adjust the colours is to either use the colours in the swatches or the mini colour slider but is there a way to choose the colours like you can in Photoshop?
I am trying to sample color of a photo on a lower layer in a gradient mesh layer above. It doesn't work in Illustrator CS6, but it works in CS4.
mac pro 3.2 xeon/6gig/1T/os10.8.4
1) how to import editable(or live) gradient meshes into After Effects or any other software?,(blend objects now import!)
2) How to Blend between gradient meshes?
I'm trying to snap a circle created with the Ellipse tool to the grid. However, the center of the circle won't snap to the grid, it's always the edges.
My circle is 4.7mm and my grid is 10mm with 2 subdivisions. How to get the center of a circle to snap to the grid?