Vista 32 bit SP2CorelDraw 6.2
How to reproduce the error:
Create a new document.Convert it to 48 Bit RGB mode.Fill the document with any colour.Create a new object and use a brush to apply some contrasting colour.Select the Blend tool and try to blend with it.On my machine the cursor will draw black instead of blending.
I am trying to use the break apart blend tool and every time it says corel has a problem & shuts down my X4?
View 5 Replies View RelatedEnter 2-3 lines of text either artistic text or paragraph text. Select and change the font for the first line only. Lets say you typed in the sample text using the Arial font and then changed the font for just the first line to Arial Black.
Now, how do you change the font for all the text to Arial Black?Now, try to change the font for all the text in the text object to Arial Black.
It is possible for me to change the font for the entire text to any other font, except the font that is used for the first line.
Even if just a single word is typed, and you change the font for just the first character in the word, you then cannot change the word's font, to the font which you used for just the first character.
I made an elipse and changed it to arc.
Than I used artistic media tool to bold it but the arc get broken.
The arc I am talking abouth is Yelow. Red circle is showing a plece where arc get broken.
how to apply color on a female or male face and body with blend tool
View 1 Replies View RelatedI just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
Previously I could choose a large paper size on my printer select fit to page and the document would scale up to printer out on paper large than than the design page. When I try this with X6 the image disappears. Is this a known bug?
View 4 Replies View RelatedI haven't used it since 6.0, but it isn't working for me now. I've noticed a myriad of problems/crashes since windows updated last night (not just corel products). I've got a simple 3000x4000 image I'm trying to grow. It locks up as soon as I change the height number.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I have a circle which is blended.
In the circle is some text, rounded - not circle text, it is placed on top rather than typed in the circle directly.
I need to edit the text and it won't let me select it! No matter how far I zoom in to make sure I'm clicking the text, the circle gets selected and the blend tool opens.
They are not grouped or anything. This has happened before many times and with much persistance I get there eventually - but is there a much faster way?
Which tool to use and how to use it for the effect below:
I am trying to simulate the radius edge along the curve such that it looks like it is a 3D object raised off the surface with drop-shadow (c). I want to retain the curved line (b) and the 90 degree corners (a) The object has a three-colour graduated fill.
CorelDraw X5.
EDIT: I am a bit closer using the contour tool but not quite right yet and I can't add a drop-shadow to a contour group and I want to make the 'white' section a bit wider.:
Waterton1.jpg
I want to learn how to blend these pictures together so that the colors flow more naturally. They were all taken with the same camera within about a minute of each other, but the difference if appearance is mind blowing. I goofed around a bit with the Equalization options, but didn't achieve satisfactory results.
blend.cdr
I have an arc shape that I'm trying to fill with a gradient-type blend where it will be 0% spot on the lower left side gradually going around to 100% spot on the lower right side. The example I have attached shows the shape on the left with a conical fountain just to give an idea of something close, but it won't actually work for my shape. I also attached a cdr X5 file which contains a blend I was working on, but can't seem to get it to work (that is the shape on the right). I tried cutting it in half which works, but I still can't get it.
My tool box specifically- the bar which lists commands like print or save--- is suddenly gone--- don't know how to get it back with no commands to call it up
View 3 Replies View RelatedWhen i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
I have been using CorelDraw X6 for a couple of days now (Trial version) on a Windows 7 v32 machine. I noticed a bug in the transformation tool (Alt F10). Every time that I input a number or value on the transformation box and then press enter on my keyboard it does not change the size of my object. The only way to make it work is inputting the value and then press the apply key (I had have no problems in the pass inputting values and then changing by pressing enter on my keyboard in CorelDraw X5 whatsoever.
View 3 Replies View Relatedwhen using contour tool (to inside of object) it defaults to the max allowed according to the setting, and grays out "number of steps", how do you change to say you want ONE contour at say .015"?...my X3 will allow this, but NOT the trial I am using of X5.
View 11 Replies View RelatedJust checking thru all the stuff that I never got around to using and stumbled across the Interactive Connector Tool (ICT). However, when I try to use it, I can only get one end of the connection to actually latch onto an object. To fix the other end to another object, I apparently would have to make it the active object so that I could connect to - or even see - the nodes. But when I tried selecting both objects, the 2nd (connect to) object lost focus on my selecting the node of the connect from object with the ICT. Each time I end up with a line that is fixed to a point on the background as the connect to point and the connect from object on the other end.
View 6 Replies View RelatedI'm using CD X5, (I own it, not the trial download) and the Effects/Add Perspective menu choice is greyed out. ! Not selectable. I select the photo I want to change persp but the option is not available. I did reset the interface by pressing F8 upon load and it did change to default but still no perspective option.
Win 7 home Premium 64bit
I should add that this is the Home - Student version. Should that be any different? Nothing else has been ... yet anyway!
OK Where is it? It is not in any of the tools listed, I have mine down the left side of the page. Do I need to go somewhere else and add the tool to the tool box?
View 8 Replies View RelatedThe brush tool is no longer working - when I select on any of the brush tools, spray, Art burhs, spray , line, marker etc, they will not work. When I select the drop down nothing is listed. Additionally, none of the other tools in the box, Effect Tool, Image Sprayer too ect, do not work as well. Did I select something to turn off the tool?
I've tried to uninstall and re-install and that did not work.
Turn off snap to objects.Now select a dimension tool and draw either a vertical or horizontal dimension line.Now notice the snapping to objects is re-enabled.How can I stop this from happening without having to keep turning of snapping while in dimensioning mode?This looks like a glitch in X4 because I don't see this problem in X5.
View 4 Replies View RelatedWhen I try to draw an ellipse (or circle) and drag it on to my sheet, nothing happens. All of my other shape tools work as they should. What has happened. It worked originally.
View 4 Replies View RelatedIs there anyway to change the Dimension tool pre sets?... i.e. color of line. type of arrow head, etc?
At the moment i have to change them every time i use the tool!
Level Equalization was a tool that I used constantly in PhotoPaint 8. By version 10, it had disappeared for no obvious reason. It was a really vauable tool. Fortunately, I still have PhotoPaint 8 on the system, but it tends to introduce other problems, so I rarely go back to it. It would be handy to have that tool back. X3 has something called Local Equalization and another option called Histogram Equalization, neither of which seems to do anything useful.
In fact, both Histogram Equalization and Local Equalization thoroughly screw up any image that I test on them. I don't have a clue as to why they are even there, since they absolutely don't work, whereas the original Level Equalization worked really well.
When I am using the eraser tool in correldraw x5, I get a crash from time to time.
This crash causes my correldraw to completely shutdown with a message that an unexpected error has occured and that the program had to be closed.
Working with important information, this is a big issue for me.
I work on CorelDraw X5, I have problems while printing an object with interactive transparent effect applied.I've converted the object to bitmap more times to apply different transparent effect in different direction.
Now when I print the file there are errors on the points highlighted by red circles. URL....I don't remember in the past to have had problems with CorelDraw 10 to use this effect.
I have been drawing the drafting lines and measurements manually and noticed the dimensions tool. Works great but when I shrink the layout for proofing the measurements change. Is there a setting that I can select that will keep the actual measurements of the drawing no matter how I resize it for proofing?
View 9 Replies View RelatedFor years I have used the clone tool happily which has been great for touching up photo's on Photo-paint 12
A few days ago - imported a jpg into Paint as usual, went to use the clone tool and it just doesn't work any more. I can select the icon and the little circles come up but it just doesn't 'clone' anything. Its as if there is mysterious setting that has been turned on that just makes nothing happen.
I have reinstalled the software: no luck - still the same.
how does the erase tool work in Corel Graphics X5? I click on it and drag it around the areas I want to erase, and all I get is a new line showing me where i've dragged the eraser around.
View 4 Replies View Relatedpiral tool doesn't look right? Or is it a math bug?
View 8 Replies View RelatedI know about all of the normal selection methods in CorelDraw, but is there a Macro or some way to do an irregular marquee selection?
View 3 Replies View Related