When I try to draw an ellipse (or circle) and drag it on to my sheet, nothing happens. All of my other shape tools work as they should. What has happened. It worked originally.
View 4 RepliesEvery time I use the ellipse tool to draw a shape, a portion of the ellipse is missing. The missing portion is always on the lower right hand side of the ellipse. I am using CorelDraw Graphics Suite X4. I have attached a graphic showing what I mean.
View 3 Replies View RelatedI am having trouble getting the erase tool to erase part of an elipse shape in Corel Draw. I select the erase tool and click and drag across the part of an elipse that I want to get rid of (so far so good), then I release the mouse and an outline of the nib tool is left behind.
View 5 Replies View RelatedThe brush tool is no longer working - when I select on any of the brush tools, spray, Art burhs, spray , line, marker etc, they will not work. When I select the drop down nothing is listed. Additionally, none of the other tools in the box, Effect Tool, Image Sprayer too ect, do not work as well. Did I select something to turn off the tool?
I've tried to uninstall and re-install and that did not work.
For years I have used the clone tool happily which has been great for touching up photo's on Photo-paint 12
A few days ago - imported a jpg into Paint as usual, went to use the clone tool and it just doesn't work any more. I can select the icon and the little circles come up but it just doesn't 'clone' anything. Its as if there is mysterious setting that has been turned on that just makes nothing happen.
I have reinstalled the software: no luck - still the same.
I would like to erase part of an ellipse without it being automatically closed. for some reason i am not allowed to choose the "keep as one object" option which i assume would stop the closing from occurring.
View 12 Replies View Relatedwhy my ellipse tool doesnt work. I used it the other day ( to draw a cirlce, obviously!). I had set the shape to be a fixed size (675 by 700 pixels) and clicked on the canvas to create the shape. This worked fine but when i went to use it again it wouldnt work. It allows me to select the tool and when i click and drag on the canvas a new layer is created but no image appears. I've tried the obviuos; putting the layer on top of all the others, checking the settings (opacity etc) but nothing seems to work.
View 2 Replies View Relatedmacros are all disabled and i remembered there is a command to disable all the events but i could not figure out where exactly it is located and even i tried to reinstall the using modiy and repair twice times to install the software but still persists to activate the macros.
all the macros are grayed out and even Alt F11 also not working.
I have set the automatic backups to end up in a specific folder on an external hard drive, which is always on. However, none of the auto backups end up there. They end up in the same folder as the actual file on my regular HD - which absolutely defies the purpose of having a backup on a different medium. I wish I could attach a screenshot of the setting page to prove my point, but Corel has not advanced to that level yet as it seems. Not even in "Support", which, unless you own the latest version of a Corel software, is non-existing anyway.
View 3 Replies View RelatedEvery time I go into Corel Photo-Paint x5 and try to use Cutout lab, there's no pop up window with the lab, the program stops working until I hit escape. I have a lot of cutouts to do.
View 3 Replies View Related I'm assuming eye candy is not working in x6 because x6 is now true 64 bit.
how to install the 64bit eye candy so it works in Corel PP x6?
Win 7, 64 bit, 16G Ram
A graphic exported in Draw & PP in X4 as a .png works fine.
The same graphic copied & pasted into Draw or PP in X6 does not.Repeatable 100%...The eyedriopper selection of the transp[arent color seems to pick up the right color, but the output presents like a .jpg. Viewed in IE9, Firefox & Chrome with same results.
When I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
The scanner shortcut doesn't work unless you go to acquire first. It keeps working until you close CorelDraw. When you reopen Corel, you must then go to acquire first.
View 2 Replies View RelatedI have uninstalled and reinstalled my x5 and while it fixed the error causing my default text cursor to start at 270 degrees for some reason instead of 0, I still cannot edit ANY font text as far as the kerning goes. When i drag it, it snaps right back everytime. This is extremely frustrating when aligning text to a curved path and all the letters are squished together.wth? This just happened in the last week randomly.
View 1 Replies View RelatedI am working with some very large images in X5, ~ 2500 mm x 1200 mm at up to 600 DPI sometimes. (And before you say it, yes, I do need this. It is a very specific application that we work on daily and I do need the ability to basically control every single pixel at that size & that resolution). I'm using WinXP 32-bit (company mandate).
When I need precisely sized objects, I am using CorelDRAW and occasionally when I need pixel perfect placement, PhotoPaint gets the call. The images may go through both before it runs through a final backend processor (some specialized software) and then going to print.
The problem is that I am running into limits when I go beyond 300 DPI (depending on the image dimensions). For example, CorelDRAW often will fail to export a TIFF correctly when I try a 450 DPI image at that size (some TIF file comes up but nothing can load it, it's corrupted). Or for even smaller images, if I enable transparent background, I also get a similar problem. Sometimes, e.g. Photo Paint, just chokes up with out of memory problem and fails to load images at all.
Thing is, we actually have Photoshop CS5 available and while there are many things I don't like about it, it actually can handle stuff of this size. So there is also a push to get Illustrator as well under the same assumption that it will work. However, Adobe stuff is way more expensive, feels more bloated and slower and (for me at least) a pain to use compared to Corel, so I'd rather not.
Would moving to 64-bit WinXP work? Or would I need to go to CorelDRAW X6? This is already a quad-core machine with 4GB of RAM.
I upgraded my Corel Draw to X6 version about 3 months ago. It worked perfect until a few days ago, since in started to freeze when doing simple operations as copying a vector image or a text or exporting a document (for example a vector image to .png or .pdf)
The funny part is that we have two computers in our office with Corel installed, and both of them have the same problem. We checked with our IT department, did all the upgrades to Corel and Windows, did a repair to Corel, and still, same problem.
We purcased X6 and installed on 3 PC. two are Windows XP and one has Windows 8 operating system.
X6 work fine and fast on Windows 8 system.
But both X6 on both Windows XP are nightmare. Just creating new document can take up to 10 sec. Printing is also very slow, but exporting simple JPG file knock-me down. It take half minute or more...
Previous we worked many year's with X4 on same PC's, now we format PC's, Install Windows XP with all service pack's and updates, reboot machine and install X6.
It is not possible to install Windows 8 on those two PC's, because they drive two machines, that only support Windows XP...
Windows XP are 32 bit, Windows 8 is 64 bit
I've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies View RelatedThere were some patches available at one time but I'm not able to find them anymore. I have recently installed X3 on a W7 machine and have so far found everything to work fine except for an issue of half of my fonts being blank when trying to choose one from the drop down menu. Existing files with these blank fonts also come up with the fonts completely missing as if the entire set of words was deleted. Here is the list of patches that I've heard is necessary for X3 to be compatible with W7...
Below is a message from an older post:
I too have CorelDraw X3 on a Windows 7 machine, in order to get the best from it you will need to visit Corel's website [URL] and install the following patches Service Packs and patches in this order, re-start after each:1. CGSX3 Hot Patch1.exe2. CGSX3SP1.msp3. CGSX3SP2.msp4. Font Nav Fix.msp .. which will fix the problem with the Fontsand then run the program in Compatibility Mode with Windows XP+SP2
Effects->Adjust->Brightness/Contrast/Intensity
Effects->Adjust->Color Balance
Effects->Adjust->Gamma
Effects->Adjust->Hue/Saturation/Lightness
None of the above work [as expected] any more. I think this happened after the 6.3 Update.To replicate the problem:
1. Fire up CorelDRAW
2. Draw a closed shape and fill it with a color of your choice.
3. Open any of the above effects mentioned in the first post.
4. Try moving any of the sliders and see what happens. (Try with both the preview button locked and unlocked.)
I am sure you will notice what I mean. Surprisingly, they all work as usual, once you convert the vector object to a bitmap!
I recently have installed Corel Draw x5 and everything was working perfectly fine when all of a sudden it stopped opening .cgm files. It will pop up the message of Corel Draw has stopped working and then I click OK and it closes the program. Every other file extension I have tried opens prefectly fine.
Here are a couple of things that I've done so far:
1. Reverted back to a Default Workspace.
2. Closed out all Dockers.
3. Reinstalled entire program and all features. Updated all patches and Clean booted the PC with only MS Services running. (As instructed by Corel Support)
problem with (times roman open font) in x5 CDR, not working,
View 1 Replies View RelatedMost of my Command Line Commands have stopped working !!! I noticed when I wanted to mirror/flip an object, I could not get those Command Line commands to "expand". When I tried other Command Line commands under "Image", "Effects", etc, most of these would not work either.
View 12 Replies View RelatedAll of a sudden my Copy Function quit working in Corel x5.
I can copy from other programs and paste into Corel, but I cannot copy from one file to another file (or the same file even) within Corel.
I was told it could be a possible update from Windows 7 causing it and that I need to reinstall my software.
my find and replace is working for current page only. even if i use replace all command. what should i do to make it work for the whole document?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
My tool box specifically- the bar which lists commands like print or save--- is suddenly gone--- don't know how to get it back with no commands to call it up
View 3 Replies View RelatedWhen i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
I have been using CorelDraw X6 for a couple of days now (Trial version) on a Windows 7 v32 machine. I noticed a bug in the transformation tool (Alt F10). Every time that I input a number or value on the transformation box and then press enter on my keyboard it does not change the size of my object. The only way to make it work is inputting the value and then press the apply key (I had have no problems in the pass inputting values and then changing by pressing enter on my keyboard in CorelDraw X5 whatsoever.
View 3 Replies View Relatedwhen using contour tool (to inside of object) it defaults to the max allowed according to the setting, and grays out "number of steps", how do you change to say you want ONE contour at say .015"?...my X3 will allow this, but NOT the trial I am using of X5.
View 11 Replies View RelatedCopy drop shadow properties is not working for me. When I click on the object to copy to, it tells me, "you did not click on an object." What do I need to do?
Edit: actually, I'm seeing that this is not working in Contour, either. And it may not be working in other effects as well, although I haven't tested those.