I've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies1, the commands DO work if the text is confined to just ONE page, even if there are multiple linked text frames.
2, it's only the Copy command that doesn't work. Once copied, text does paste irrespective of the amount of text or linked pages.
And do I have to wait for 6.3 to get a resolution ? On Win 7, 64 bit
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedI've found a couple of discussions on creating reflections for vector objects, but what about bitmaps?
Whilst searching through stock photos, I started noticing some of those common isolated images on a "reflective" surface are rather lazily created resulting in just plain wrong reflections. I'm talking mostly about those "people standing around" images, but it could apply to anything.
Here's an example of what I mean:
Now if these folks were standing on a reflective surface, their reflections would meet where they touch. Note how some appear to be standing on one foot, because the reflection of the other foot doesn't meet. Or it looks like they're standing on their toes because the heel is off. Obviously this was done by simply flipping the image and fading it.
Here's a link to the stock photo if you want to see the whole thing. Here's another one where everyone appears to be standing on their toes.
A couple of times I've attempted to correct this by creating my own reflections. With some fudging and distortion of the reflected outline, I managed, but typically had to have a very fast fade. Easier to create a vector trace, then shade it grey and use that. It gets increasingly more difficult the more distinct and clear you want the reflection. Studying reality, if someone were standing on a mirror, their reflection would have the perspective of looking up at them from the bottom.
So how would you approach creating a reflection from a bitmap where there is no straight line defining the reflection line?
Is there a way to have Corel Draw re-import images I imported into Draw? I have a bunch of images I imported, power clipped, and did a few other things to but I did not edit the bitmap itself. I'm using CD to outline the bitmap to create a white back ground for the image. Now I adjusted the bitmaps in After Shot Pro so it looks better and now I want CD to use the new bitmap and not the one I imported but I dont want to go through all the power clipping ect ect again.
I named all the files the same so is there a way for CD to re-import all the bitmaps again?
If I import a custom bitmap into Coreldraw, as linked image, the resulting image is very coarse.
If I import all content, the resolution is preserved.
Is that possible to increase the preciousness of linked images to reflect original?
Is it possible the bitmaps get imported with their filenames? i.e. when we select the bitmap, the object manager should say like image - tree.jpg.
View 5 Replies View RelatedI am an Illustrator user but I am working with a company that uses CorelDraw. Recently I received several large files from them with bitmapped images within the CorelDraw files. I don't know how they are saving or exporting them, but when i receive them they look like standard Illustrator eps files. However, when I open them, the bitmapped files are embedded instead of linked, which is a no-no in Illustrator. These embedded files have a default resolution of 72 dpi no matter what the original resolution was. So, my question is, what is the standard way CorelDraw brings in bitmapped files and is there a way to export files so that bitmapped files retain their original resolution.
View 8 Replies View RelatedI have a problem printing bitmap images on CorelDRAW documents in my work computer (Windows Vista Home Premium 32 Bit). I have a HP 3535 inkjet printer, and It was prinitng normally for some time, but one day the printer suddenly stopped printing images from the CorelDRAW documents and only prints text and vector images. The same happens in Photo-Paint, it simply prints in blank.
I Tried to restore the program to default settings using the F8 command with no luck. This really annoying and I need to print bitmaps for my work. This happens in all my documents...
I have recently upgraded from X4 to X5 and while when I first installed it I was able to click on a bitmap and get CorelPhotoPaint to launch - it now says Failure to launch server application. I have tried the F8 tip while opening both Paint & Draw, repairing the installation (from both the hard drive and the disk), and removing and reinstalling. I used to have X4 and even X3 on my system but have removed both of those versions. And yes, I have associated the files although within Corel the ticked boxes do not seem to stay put.
View 9 Replies View RelatedWhat I want to do is something like the envelope tool, but actually stretch an image from the center-points (kind of like the old pincushion settings in a CRT monitor):
I played around with the mesh warp tool, but that thing seems nearly impossible to fine tune even when I use the magnifier.
The tool "Warp Brush" would probably work with some delicacy, but seems to be exclusive to Paint Shop Pro, and the smear tool obviously will not work...
Recurring problem i'm having with bitmaps im trying to export to our large format printer. Some bitmaps are coming up with a grey type filter or lens that corel is automatically putting over my photo.
When i export this' filter' remains on the picture.
If i hit 'edit bitmap' the photo comes up normal with all the colours as it should be. Hit 'save' and it goes straight back to having a grey filter over it? Its only with some photos and the other ones are the same profile on the same page? It seems to be always the physically largest one in size (not dpi) I have tried converting to a cmyk bitmap instead of RGB.
After the X6.2 service pack everything looked fine at first, but when dropping bitmaps, Draw now regularly complains about missing the color profile. Of course the bitmaps have profiles embedded, and Draw had never complained about those same bitmaps before. Well, I have everything in AdobeRGB or IsoCoated v2 CMYK, and these are also the standard settings in CorelDraw. So it didn't make a difference eventually, colors remained the same to the numbers.
However, I re-calibrated my display a little later, installed the new profile, opened Draw and was shocked: stridently over-saturated colors in bitmap images as well as in vector graphics, nowhere near their appearance in four-color print (they had been pretty close before). In other color-managed applications everything looks fine, only CorelDraw is concerned. It still does respond to display profile changes, it does adjust colors when a different profile is installed, but the over-saturation is always there. Color definitions are not changed and output is as ever, it is only Corel's rendering of display colors.
I believe that this reaction to a change of the system display profile and the ignorance of profiles embedded in bitmaps go back to the same problem with color management.
Is there a registry hack or something to make it recognize color profiles properly again, or do we have to wait for the next SP to fix a bug brought in by the last?
We have a new Roland printer, an LEJ-640, which prints in CMYK plus white and clear gloss.
In order to print a white bitmap, I must apply a spot color to the bitmap. I used the Bitmap|Mode|Dutone to apply the white spot color and it seems to work correctly--it shows up as a spot color when I use the print dialog to preview separations.
When I use either print to file with the RolandVW print driver or File|Publish to PDF, the spot color on the bitmap is not preserved, Versaworks does not recognize it as a spot color. Color output is set to "Native". However, a vector object on the same page with the same spot color applied is recognized as a spot color.
The pink part in the versaworks screenshot indicates white spot color, as you can see only the vector object is recognized.
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
Is there an updated copy of the macro Paste from AI anywhere to be found?
The one at Oberon is only for X4 but seemed to work in X5 but not X6.
I somehow lost the toolbar with the "copy to the clipboard" and "paste from the clipboard" icons.. which tool bar i need to turn back on?
View 2 Replies View RelatedFor some reason i can no longer copy and paste text from one page to another properly.
I write the text out as normal (not using a text box) but when i copy and then try to past to another page it then does several other things.
It changes the font and cap height, puts it onto a text box and centres it on the page?
If i copy and paste text along with an object (say a simple box) everything copies and pastes perfectly, just not text on its own
the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
View 2 Replies View RelatedI have drawings created in X5 taht i need to put into word documents, i have in the past done this many times with no issues, i now have a drawing that will paste in, but some objects are missing, and some text is missing.
I have tried all of the Paste special options, the only one that will put all objects in is bitmap, with all others objects are missing.
If i print as PDF all objects are there, if i Export the graphic for Office, using compatibility mode places all objects, but if i choose editable mode the same objects disappear
I have a problem in trying to copy text from an existing multi column text box and pasting it into another existing text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
How do you paste a website domain name without causing the underline for hyperlink?
When I copy and paste text which includes a website link [URL] how do I stop or prevent the underline? I have tried changing the options in the page setup for text for automatic Hyperlinks but that does not stop the underline when pasting text
For some time I was using CorelDraw 12 with Windows XP and Excel 2007.I normally make some tables in Excel which I copy and paste into Corel using "Paste special"/Picture/Enhanced Metafile. In Windows XP there was no problem. Since I switched to Windows 7, I have the following problems:
- The font Wingdings 3 comes out as Arial.
- The second problem is a very strange thing: Some characters, such as ,-"; , always at the END of the line, just dissapear. It happens sometimes, not always, and I can't see absolutely no logic in it: I copy the same thing, paste it several times, and sometimes the comma comes out, sometimes not. I remember that this happened to me ONCE, long time ago, when I was still using XP, but then I restarted Corel and it stopped making problems. But now, with Windows 7, it happens almost all the time. I tried it on a few different PCs and I even tried it with Corel X4. Always the same problem.
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies View RelatedIn my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View Relatedmacros are all disabled and i remembered there is a command to disable all the events but i could not figure out where exactly it is located and even i tried to reinstall the using modiy and repair twice times to install the software but still persists to activate the macros.
all the macros are grayed out and even Alt F11 also not working.
I have set the automatic backups to end up in a specific folder on an external hard drive, which is always on. However, none of the auto backups end up there. They end up in the same folder as the actual file on my regular HD - which absolutely defies the purpose of having a backup on a different medium. I wish I could attach a screenshot of the setting page to prove my point, but Corel has not advanced to that level yet as it seems. Not even in "Support", which, unless you own the latest version of a Corel software, is non-existing anyway.
View 3 Replies View RelatedEvery time I go into Corel Photo-Paint x5 and try to use Cutout lab, there's no pop up window with the lab, the program stops working until I hit escape. I have a lot of cutouts to do.
View 3 Replies View Related I'm assuming eye candy is not working in x6 because x6 is now true 64 bit.
how to install the 64bit eye candy so it works in Corel PP x6?
Win 7, 64 bit, 16G Ram
A graphic exported in Draw & PP in X4 as a .png works fine.
The same graphic copied & pasted into Draw or PP in X6 does not.Repeatable 100%...The eyedriopper selection of the transp[arent color seems to pick up the right color, but the output presents like a .jpg. Viewed in IE9, Firefox & Chrome with same results.
When I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057