CorelDRAW Graphics Suite X5 :: Not Printing Bitmaps On HP Inkjet Printer
Oct 23, 2011
I have a problem printing bitmap images on CorelDRAW documents in my work computer (Windows Vista Home Premium 32 Bit). I have a HP 3535 inkjet printer, and It was prinitng normally for some time, but one day the printer suddenly stopped printing images from the CorelDRAW documents and only prints text and vector images. The same happens in Photo-Paint, it simply prints in blank.
I Tried to restore the program to default settings using the F8 command with no luck. This really annoying and I need to print bitmaps for my work. This happens in all my documents...
View 4 Replies
ADVERTISEMENT
Sep 11, 2013
Recurring problem i'm having with bitmaps im trying to export to our large format printer. Some bitmaps are coming up with a grey type filter or lens that corel is automatically putting over my photo.
When i export this' filter' remains on the picture.
If i hit 'edit bitmap' the photo comes up normal with all the colours as it should be. Hit 'save' and it goes straight back to having a grey filter over it? Its only with some photos and the other ones are the same profile on the same page? It seems to be always the physically largest one in size (not dpi) I have tried converting to a cmyk bitmap instead of RGB.
View 1 Replies
View Related
May 16, 2012
I have a problem with CorelDraw X6.
When printing 100% black on laser printer the Black is all in raster. Very strange because the same file printed from X4 /same PC and same printer/ is OK and is not in raster.
Probably the problem is somewere in X6.
I don't belive that the problem is in the color management because it's the same as my X5 and there all is OK too.
View 3 Replies
View Related
Mar 6, 2013
Will Illustrator CS5 files print on a standard inkjet printer or is some sort of RIP software required? I'm considering an Epson WF-7520.
View 7 Replies
View Related
Mar 14, 2011
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies
View Related
May 4, 2010
As indicated by title I have just switched to a newer computer from a system using XP and corel draw 8 to a new system using Win7 and corel draw X3 and using the same printer (buisness inkjet 2230). I have never had any problems printing before but now every time i print my pages are offset to the right. The only solution I have found is that I can change the printer page (in print preview) to the left. But though my many attempts to do this works fine, saving it as a default just won't work. After saving as default next time I open a document it switches to old layout. I have even tried going to print defaults folder, deleting all corel's defaults, and then saving and somehow it just reverts back to regular settings. make life simpler than changing print area every time?
View 5 Replies
View Related
Jun 9, 2013
I've found a couple of discussions on creating reflections for vector objects, but what about bitmaps?
Whilst searching through stock photos, I started noticing some of those common isolated images on a "reflective" surface are rather lazily created resulting in just plain wrong reflections. I'm talking mostly about those "people standing around" images, but it could apply to anything.
Here's an example of what I mean:
Now if these folks were standing on a reflective surface, their reflections would meet where they touch. Note how some appear to be standing on one foot, because the reflection of the other foot doesn't meet. Or it looks like they're standing on their toes because the heel is off. Obviously this was done by simply flipping the image and fading it.
Here's a link to the stock photo if you want to see the whole thing. Here's another one where everyone appears to be standing on their toes.
A couple of times I've attempted to correct this by creating my own reflections. With some fudging and distortion of the reflected outline, I managed, but typically had to have a very fast fade. Easier to create a vector trace, then shade it grey and use that. It gets increasingly more difficult the more distinct and clear you want the reflection. Studying reality, if someone were standing on a mirror, their reflection would have the perspective of looking up at them from the bottom.
So how would you approach creating a reflection from a bitmap where there is no straight line defining the reflection line?
View 5 Replies
View Related
Jan 2, 2013
Is there a way to have Corel Draw re-import images I imported into Draw? I have a bunch of images I imported, power clipped, and did a few other things to but I did not edit the bitmap itself. I'm using CD to outline the bitmap to create a white back ground for the image. Now I adjusted the bitmaps in After Shot Pro so it looks better and now I want CD to use the new bitmap and not the one I imported but I dont want to go through all the power clipping ect ect again.
I named all the files the same so is there a way for CD to re-import all the bitmaps again?
View 1 Replies
View Related
Jan 17, 2012
If I import a custom bitmap into Coreldraw, as linked image, the resulting image is very coarse.
If I import all content, the resolution is preserved.
Is that possible to increase the preciousness of linked images to reflect original?
View 14 Replies
View Related
Apr 13, 2012
Is it possible the bitmaps get imported with their filenames? i.e. when we select the bitmap, the object manager should say like image - tree.jpg.
View 5 Replies
View Related
Oct 5, 2012
I am an Illustrator user but I am working with a company that uses CorelDraw. Recently I received several large files from them with bitmapped images within the CorelDraw files. I don't know how they are saving or exporting them, but when i receive them they look like standard Illustrator eps files. However, when I open them, the bitmapped files are embedded instead of linked, which is a no-no in Illustrator. These embedded files have a default resolution of 72 dpi no matter what the original resolution was. So, my question is, what is the standard way CorelDraw brings in bitmapped files and is there a way to export files so that bitmapped files retain their original resolution.
View 8 Replies
View Related
Dec 20, 2012
I've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies
View Related
Jan 27, 2012
I have recently upgraded from X4 to X5 and while when I first installed it I was able to click on a bitmap and get CorelPhotoPaint to launch - it now says Failure to launch server application. I have tried the F8 tip while opening both Paint & Draw, repairing the installation (from both the hard drive and the disk), and removing and reinstalling. I used to have X4 and even X3 on my system but have removed both of those versions. And yes, I have associated the files although within Corel the ticked boxes do not seem to stay put.
View 9 Replies
View Related
Sep 16, 2013
What I want to do is something like the envelope tool, but actually stretch an image from the center-points (kind of like the old pincushion settings in a CRT monitor):
I played around with the mesh warp tool, but that thing seems nearly impossible to fine tune even when I use the magnifier.
The tool "Warp Brush" would probably work with some delicacy, but seems to be exclusive to Paint Shop Pro, and the smear tool obviously will not work...
View 2 Replies
View Related
Dec 1, 2012
After the X6.2 service pack everything looked fine at first, but when dropping bitmaps, Draw now regularly complains about missing the color profile. Of course the bitmaps have profiles embedded, and Draw had never complained about those same bitmaps before. Well, I have everything in AdobeRGB or IsoCoated v2 CMYK, and these are also the standard settings in CorelDraw. So it didn't make a difference eventually, colors remained the same to the numbers.
However, I re-calibrated my display a little later, installed the new profile, opened Draw and was shocked: stridently over-saturated colors in bitmap images as well as in vector graphics, nowhere near their appearance in four-color print (they had been pretty close before). In other color-managed applications everything looks fine, only CorelDraw is concerned. It still does respond to display profile changes, it does adjust colors when a different profile is installed, but the over-saturation is always there. Color definitions are not changed and output is as ever, it is only Corel's rendering of display colors.
I believe that this reaction to a change of the system display profile and the ignorance of profiles embedded in bitmaps go back to the same problem with color management.
Is there a registry hack or something to make it recognize color profiles properly again, or do we have to wait for the next SP to fix a bug brought in by the last?
View 14 Replies
View Related
Jul 14, 2011
We have a new Roland printer, an LEJ-640, which prints in CMYK plus white and clear gloss.
In order to print a white bitmap, I must apply a spot color to the bitmap. I used the Bitmap|Mode|Dutone to apply the white spot color and it seems to work correctly--it shows up as a spot color when I use the print dialog to preview separations.
When I use either print to file with the RolandVW print driver or File|Publish to PDF, the spot color on the bitmap is not preserved, Versaworks does not recognize it as a spot color. Color output is set to "Native". However, a vector object on the same page with the same spot color applied is recognized as a spot color.
The pink part in the versaworks screenshot indicates white spot color, as you can see only the vector object is recognized.
View 1 Replies
View Related
Jun 13, 2012
printing corel draw to a cutter plotter that does not register as a printer Eh720
View 2 Replies
View Related
Jan 20, 2012
Is there a good (better?) way to find a local printer? I am just starting a desktop publishing business, part time, out of my home and I would like to find a good local printer in the Calgary, Alberta area. Do I just go thru the yellow pages and try my luck?
View 2 Replies
View Related
May 22, 2012
how can I set the "color management" to the printer to print exactly colors as on the monitor?
View 4 Replies
View Related
Aug 18, 2011
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
View 14 Replies
View Related
May 28, 2011
I have noticed that when i make changes to line widths in a drawing using the outline pen, the printed output does not change until i make at least a change of .005". changing it by less than this only changes it on the display.
View 2 Replies
View Related
Oct 3, 2011
I was working on an order form design the other day and my boss said we need to fill in some of the empty space, so I suggested we use a dot pattern-esque type watermark of the organization's logo that the order form was for.
For some reason when I sleceted the logo I couldnt access the change brightness contrast option in effects. So I simply made a light gray rectangle, placed it over the logo, clicked on the rectangle with the transparency tool, changed it to uniform, and changed the mode to mulitply or add or something like that. It looked great on screen, but when i sent it to the laser printer with some post script LPI or dot pattern options for the lighter grays, nothing printed out at all from underneath the rectangle.
I tried it through our copying machine, and it worked, but the copying machine has no built in halftone effects for grayscale.
View 3 Replies
View Related
Aug 16, 2013
When i set more than 1 copy in my print window my HP ColorlaserJet 5550 printer output 1 OK and status side saying: Cannot save job in printer.
Printdriver new updated (PCL6 );
firmware new updated:
View 2 Replies
View Related
Apr 17, 2010
I just upgraded to X5 and now suddenly I am having difficulty printing to my dell 3110cn laser printer. I get the error, "Unable to access printer driver. Try removing and reinstalling this printer driver". If I click OK I get the error a couple of more times followed by "Internal application error." Then Corel Draw crashes. My PC is running Windows 7 64 bit.
I have tried re-installing the printer driver with the latest from dell and uninstalling and re-installing corel draw, but nothing has worked. I am about ready to go back to X4.
View 2 Replies
View Related
Mar 8, 2012
I cannot get Coreldraw X5 to to print in landscape. I am using a GCC postscript printer and Windows XP.
View 1 Replies
View Related
Nov 4, 2013
Which folder contains the printers that CorelDraw X6 recognizes? I'm trying to install Epilog Laser drivers on a new Win8 laptop, and somehow I have duplicate copies of the same "printer/laser engraver." I'm starting the driver instalation over, and want to remove the duplicate printers in CorelDraw. I've cleaned out all printers in control panel/devices and printers, as well as print drivers. But the duplicate printers remain in Corel X6. I've looked in each Corel folder on my computer it seems, and can't locate it. Would it by chance be a registy file I need to edit
Run msinfo32, summary > components > printing select the
printer to be deleted then file > print, select printer >
right click > delete
View 4 Replies
View Related
Feb 28, 2013
having some nice flyers printed at Office Depot. They do not accept CDR files (practically nobody does),
so which format would be best? they take pdf, illustrator etc. the flyer is text plus high quality pictures of art.
View 4 Replies
View Related
Sep 16, 2013
I am new to Corel 12, I am a little behind the times. I need setting up my margins and putting in my printer marks.
View 1 Replies
View Related
Aug 28, 2012
New to CDR X6 just having upgraded from CDR 8.
Printing a black and white layout to my HP LaserJet 4000 produces an image that appears to be grayscale instead of solid black. In other words, my text, line border I've put around the layout and graphics (for the most part), all appear about 70-80% black instead of SOLID black. Small text doesn't appear to be nearly as sharp because it looks like a halftone instead solid black. On one layout I just printed, the entire thing appears halftoned except for one vector graphic that did print in solid black. Strange. I figured I have something set incorrectly in the software or printer. Has to be the CDR X6 software though because all other programs output just fine.
View 5 Replies
View Related
May 9, 2011
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
View 14 Replies
View Related
Jun 4, 2013
I have been printing half tones for quite some years now with no troubles, all of a sudden my post script printer wont print half tones, I must have changed an option somewhere, and dont know what I did whether I have changed something in corel or on the printer itself but I dont think it is the printer .
View 2 Replies
View Related
