If I import a custom bitmap into Coreldraw, as linked image, the resulting image is very coarse.
If I import all content, the resolution is preserved.
Is that possible to increase the preciousness of linked images to reflect original?
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedI've found a couple of discussions on creating reflections for vector objects, but what about bitmaps?
Whilst searching through stock photos, I started noticing some of those common isolated images on a "reflective" surface are rather lazily created resulting in just plain wrong reflections. I'm talking mostly about those "people standing around" images, but it could apply to anything.
Here's an example of what I mean:
Now if these folks were standing on a reflective surface, their reflections would meet where they touch. Note how some appear to be standing on one foot, because the reflection of the other foot doesn't meet. Or it looks like they're standing on their toes because the heel is off. Obviously this was done by simply flipping the image and fading it.
Here's a link to the stock photo if you want to see the whole thing. Here's another one where everyone appears to be standing on their toes.
A couple of times I've attempted to correct this by creating my own reflections. With some fudging and distortion of the reflected outline, I managed, but typically had to have a very fast fade. Easier to create a vector trace, then shade it grey and use that. It gets increasingly more difficult the more distinct and clear you want the reflection. Studying reality, if someone were standing on a mirror, their reflection would have the perspective of looking up at them from the bottom.
So how would you approach creating a reflection from a bitmap where there is no straight line defining the reflection line?
Is there a way to have Corel Draw re-import images I imported into Draw? I have a bunch of images I imported, power clipped, and did a few other things to but I did not edit the bitmap itself. I'm using CD to outline the bitmap to create a white back ground for the image. Now I adjusted the bitmaps in After Shot Pro so it looks better and now I want CD to use the new bitmap and not the one I imported but I dont want to go through all the power clipping ect ect again.
I named all the files the same so is there a way for CD to re-import all the bitmaps again?
Is it possible the bitmaps get imported with their filenames? i.e. when we select the bitmap, the object manager should say like image - tree.jpg.
View 5 Replies View RelatedI am an Illustrator user but I am working with a company that uses CorelDraw. Recently I received several large files from them with bitmapped images within the CorelDraw files. I don't know how they are saving or exporting them, but when i receive them they look like standard Illustrator eps files. However, when I open them, the bitmapped files are embedded instead of linked, which is a no-no in Illustrator. These embedded files have a default resolution of 72 dpi no matter what the original resolution was. So, my question is, what is the standard way CorelDraw brings in bitmapped files and is there a way to export files so that bitmapped files retain their original resolution.
View 8 Replies View RelatedI've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies View RelatedI have a problem printing bitmap images on CorelDRAW documents in my work computer (Windows Vista Home Premium 32 Bit). I have a HP 3535 inkjet printer, and It was prinitng normally for some time, but one day the printer suddenly stopped printing images from the CorelDRAW documents and only prints text and vector images. The same happens in Photo-Paint, it simply prints in blank.
I Tried to restore the program to default settings using the F8 command with no luck. This really annoying and I need to print bitmaps for my work. This happens in all my documents...
I have recently upgraded from X4 to X5 and while when I first installed it I was able to click on a bitmap and get CorelPhotoPaint to launch - it now says Failure to launch server application. I have tried the F8 tip while opening both Paint & Draw, repairing the installation (from both the hard drive and the disk), and removing and reinstalling. I used to have X4 and even X3 on my system but have removed both of those versions. And yes, I have associated the files although within Corel the ticked boxes do not seem to stay put.
View 9 Replies View RelatedWhat I want to do is something like the envelope tool, but actually stretch an image from the center-points (kind of like the old pincushion settings in a CRT monitor):
I played around with the mesh warp tool, but that thing seems nearly impossible to fine tune even when I use the magnifier.
The tool "Warp Brush" would probably work with some delicacy, but seems to be exclusive to Paint Shop Pro, and the smear tool obviously will not work...
Recurring problem i'm having with bitmaps im trying to export to our large format printer. Some bitmaps are coming up with a grey type filter or lens that corel is automatically putting over my photo.
When i export this' filter' remains on the picture.
If i hit 'edit bitmap' the photo comes up normal with all the colours as it should be. Hit 'save' and it goes straight back to having a grey filter over it? Its only with some photos and the other ones are the same profile on the same page? It seems to be always the physically largest one in size (not dpi) I have tried converting to a cmyk bitmap instead of RGB.
After the X6.2 service pack everything looked fine at first, but when dropping bitmaps, Draw now regularly complains about missing the color profile. Of course the bitmaps have profiles embedded, and Draw had never complained about those same bitmaps before. Well, I have everything in AdobeRGB or IsoCoated v2 CMYK, and these are also the standard settings in CorelDraw. So it didn't make a difference eventually, colors remained the same to the numbers.
However, I re-calibrated my display a little later, installed the new profile, opened Draw and was shocked: stridently over-saturated colors in bitmap images as well as in vector graphics, nowhere near their appearance in four-color print (they had been pretty close before). In other color-managed applications everything looks fine, only CorelDraw is concerned. It still does respond to display profile changes, it does adjust colors when a different profile is installed, but the over-saturation is always there. Color definitions are not changed and output is as ever, it is only Corel's rendering of display colors.
I believe that this reaction to a change of the system display profile and the ignorance of profiles embedded in bitmaps go back to the same problem with color management.
Is there a registry hack or something to make it recognize color profiles properly again, or do we have to wait for the next SP to fix a bug brought in by the last?
We have a new Roland printer, an LEJ-640, which prints in CMYK plus white and clear gloss.
In order to print a white bitmap, I must apply a spot color to the bitmap. I used the Bitmap|Mode|Dutone to apply the white spot color and it seems to work correctly--it shows up as a spot color when I use the print dialog to preview separations.
When I use either print to file with the RolandVW print driver or File|Publish to PDF, the spot color on the bitmap is not preserved, Versaworks does not recognize it as a spot color. Color output is set to "Native". However, a vector object on the same page with the same spot color applied is recognized as a spot color.
The pink part in the versaworks screenshot indicates white spot color, as you can see only the vector object is recognized.
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
I have a JPEG cartoon image (company logo) that I want to import. When I do the logo goes blurry. Not terrible, but when you zoom in, way more blurry than if you opened the picture in Microsoft Picture Manager.
View 6 Replies View RelatedI have imported a 2d drawing of a vehicle into coral draw x5 from auto cad. Problem is that when I zoom in all the lines do not seem to be joined especially curves, this in turn makes it a pain when filling with colour. I have recently traced one side manually using line and curve tools but my question is, is there s quicker way of tracing a dxf without manually doing it? And if so how to do it?
View 4 Replies View RelatedMarshall's Burger Logo (Red Background).pdf
I receive a PDF file from my client which is their logo.
The text is suppose to be vector, but they appear as bitmap and I cannot apply fill and outline to it.
I can edit the nodes with the Shape Tool after I converted it to AI or EPS format, but still cannot apply fill and outline.
I'm trying to add perspective to photos (JPEG files) imported into CorelDraw.
I want to change a photo so that, rather than facing 'head on', it looks as though it is facing away at an angle.
I can skew basic shapes to give the impression these have perspective but I can not do this with JPEG files. How to acheive this in CorelDraw or CorelPhoto.
I want to get a version of coreldraw, but can't afford x6, I need to be able to create high resolution pdfs and pngs and also to create stuff in CMYK. Can I do this in x3 or do I need to splash out on a newer version.
View 3 Replies View RelatedI have an image from a magazine that is 9" X 7.5" and want to scan it so that I can get the best resolution from it and be able to place it on a banner that will be 3ft X5ft.
In what format should I scan it ? JPEG, TIFF, or PDF
Is there a way to export at a lower resolution or to change the resolution in some way so the resulting PDF isn't so large?
View 5 Replies View RelatedI have recently switched from a PC to Mac and reloaded my CorelDraw 11 software onto my Mac. I have been importing tiffs into my document but am unable to use any of effects tools. What I can do to get this software working on my laptop. I am running OSX Leopard.
View 4 Replies View RelatedI create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
what the resolution is on the screen in Pixels mode? Where Corel finds the value of resolution?
View 11 Replies View RelatedI am producing an 10 x 5 foot trade show display for a client. Even though the image they chose is relatively large (18.7" x 12.5" at 300 dpi), when scaled up it will be about 64 dpi at final size.
I've read that such displays typically use 75-100 dpi images. Where do you find ultra high res stock images? The one we are using is from Istockphoto.
I am playing with this at the minute but thought I would upload an image I am having trouble with. Learned 'flattening' with effects on top of other images - my problem this time is that we need a ghosted part of an image - my boss has done a 'glow' rectangle but i cannot 'flatten' it as it is sitting on top of a vector image!
I am going to try and split the vector image and fill it with a fountain fill but unsure if this can be done.
Been a CorelDraw user for a long time. Just installed x6 (previous X4), and tried to export an image to jpg. X6 seems to have this dialog box with all these presets. How do I manually set my resolution, pixels, etc. as in the previous versions?
View 4 Replies View RelatedThe imported file is probably from Illustrator. The vector element in question is text converted to curves with a CMYK bit map fill. CorelDraw X5 seems unable to extract the bitmap fill from the vectors. What's up with this, is there anyway to extract the bitmap fill?
View 3 Replies View RelatedWhen importing a multi-page pdf or ps file into a multi-page document, sometimes the inserted pages will all have their Document Grid layer visibility turned on, even when the existing pages in the document all have it turned off.
If I bring up the object manager, I can go through the affected pages and 'un-eye' them one page at a time. But it's a blooming nuisance, especially when importing dozens of pages at once.
How can I make an imported scan of a line drawing "transparent" and add color fills to various sections, using the freehand tool ? I have done this many times with an older version of CorelDraw, but in CorelDraw- x5 the
imported scan includes a white background (even when I select NO FILL), so that my freehand tool selections are either on top of, or hidden behind the white background.
I have to design a billboard that needs to be 8ft by 20ft. What size layout should I design it in? I know I need to make sure my pictures are high resolution so it can be blown up to the proper size, correct?
View 5 Replies View Related