I have an image from a magazine that is 9" X 7.5" and want to scan it so that I can get the best resolution from it and be able to place it on a banner that will be 3ft X5ft.
In what format should I scan it ? JPEG, TIFF, or PDF
I would like to scan some original pen and ink drawings I do and I'd like to remove the background once they are on the page so I can manipulate the art. I work in Corelx4. Will this same technique work with book pages scanned in?
View 1 Replies View Relatedgood procedure to scan pages from a book on a flatbed scanner and edit the resulting file in Corel Photopaint (PP).
My situation is the following: The book contains text as well as images. The final image, after scanning and editing in PP should look good when printed on my simple desktop B&W laser printer but also look well when placed in a document for viewing on the computerscreen. The latter require colors.
My experiences so far: Usually I scan from PP using 600 dpi, to make the text look good on print. Often I get text prints which are not that nice, because in the rasterization which is taking place when my image is printed on my laserprinter in B&W it contains white pixels in the text sections. I can see them when using my 8x Horizon magnifying glass. I guess it is because I need to use pure black in RGB. What are the optimal color settings for my document? (Color Management setting ...). What I usually do when editing the images in PP is that I want to remove the often greyish areas around the corner of the page and make the text stand more black and crisp. To do so, I out-mask the images to not destroy them. Then in the Image Adjustment Lab window I use the "Select White Point" and "Select Black Point" to make the background behind the text white and to make the text more black. Sometimes I also use "Contrast Enhancement". Afterwards I sometimes use the "Invert Mask" tool to improve the images a little.
I am interested in the best settings for my document (Color Management) and a working process which means my scannings and editing can be accomplished in a decent time with a relative high degree of quality.
I want to get a version of coreldraw, but can't afford x6, I need to be able to create high resolution pdfs and pngs and also to create stuff in CMYK. Can I do this in x3 or do I need to splash out on a newer version.
View 3 Replies View RelatedIf I import a custom bitmap into Coreldraw, as linked image, the resulting image is very coarse.
If I import all content, the resolution is preserved.
Is that possible to increase the preciousness of linked images to reflect original?
Is there a way to export at a lower resolution or to change the resolution in some way so the resulting PDF isn't so large?
View 5 Replies View RelatedI create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
what the resolution is on the screen in Pixels mode? Where Corel finds the value of resolution?
View 11 Replies View RelatedI am producing an 10 x 5 foot trade show display for a client. Even though the image they chose is relatively large (18.7" x 12.5" at 300 dpi), when scaled up it will be about 64 dpi at final size.
I've read that such displays typically use 75-100 dpi images. Where do you find ultra high res stock images? The one we are using is from Istockphoto.
I am playing with this at the minute but thought I would upload an image I am having trouble with. Learned 'flattening' with effects on top of other images - my problem this time is that we need a ghosted part of an image - my boss has done a 'glow' rectangle but i cannot 'flatten' it as it is sitting on top of a vector image!
I am going to try and split the vector image and fill it with a fountain fill but unsure if this can be done.
Been a CorelDraw user for a long time. Just installed x6 (previous X4), and tried to export an image to jpg. X6 seems to have this dialog box with all these presets. How do I manually set my resolution, pixels, etc. as in the previous versions?
View 4 Replies View RelatedI have artistic text on a simple schematic diagram that I am trying to export out as a .cgm file, but the lines convert from solid lines to dashes and the vertical text does not stay in place after the export.
View 1 Replies View RelatedA client says she needs a graphic in EPG format, and the only thing I can find is related to electronic program guides.
View 7 Replies View RelatedThe file extension .sbj was used by Micrografix products, and Micrografix has since become a part of the Corel Corporation. I have thousands of these files. How can I use them in CorelDraw X5?
View 1 Replies View RelatedIs there an updated copy of the macro Paste from AI anywhere to be found?
The one at Oberon is only for X4 but seemed to work in X5 but not X6.
I have to design a billboard that needs to be 8ft by 20ft. What size layout should I design it in? I know I need to make sure my pictures are high resolution so it can be blown up to the proper size, correct?
View 5 Replies View RelatedI have a question about using the outline trace function and resolution of images.
Say for instance, I am trying to create an existing logo for a customer in which I have to pull the image off the internet. I am unable to find an image that is high resolution, so I pick one with a lower resolution, because after all, I am going to trace the logo to cut out on my cutter with a heat transfer application. It is a simple design, a heart for instance. So when I use Corel Trace, no matter how small beforehand I make said heart, when it traces it comes out jagged, like the pixelation you see on a low res image. Is there any way to smooth this out? Or do I just need to look harder for a higher res image?
When I try to convert any object to a bitmap, the resolution is highlighted but doesn't workif I want to change the existing resolution. I have to RESELECT the numbers to export to another resolution as if the resoltion WASN'T highlighted.
View 8 Replies View RelatedI chose to add the ico file format to my options for export in Photo-Paint, but when I go to export, it is not in the drop-down menu. What I need to do?
View 3 Replies View RelatedHave text that has markers - need to write a macro to pick up the markers and make that text bold or that text italic etc...
ie #Arana Hills# 'Heidke Dance Studio' Joanne Wilson.: 5923.1111, Ramon 0444.220.567
Need the text between the # to be bold and remove the # markers
Need the text between the ' to be italic and keep the data marker '
How to save as coreldraw file in .tiff format
View 6 Replies View RelatedI have created a Marketing presentation in corelDRAW now I want to export it in MS Word format with as it is look and feel and editable text.
View 2 Replies View Relatedpureblack.jpg
Is it possible to get pure black when exporting in RGB to .jpg format?
Example01.jpg
I have used Coreldraw X5 using braille text. When I opened the files using Coreldraw X6 and exported to .SVG output. The text appears to be showing improper alignment.I want the text to be intact and letters should not break.
I have a problem with Corel Draw x4 .eps exporting.When i exported graphic elements what contains gradient or transparency effect in eps format these elements appears broken or destroyed. how can i export this graphics correctly with CDRx4.
View 1 Replies View RelatedA .cdr file from CDX6 when "Saved as" .cmx format can be opened in early version of CD?
Why .cdr when converted to .cmx format file is smaller (in KB)?
What are main differences cdr/cmx?
How do I go about converting my CDX5 file to EPS8 format so that I can start submitting some of my work as vector stock to canstockphoto website?
View 2 Replies View RelatedCorel draw X5 and X6 is not able to show me the preview of PSD file format.
View 9 Replies View RelatedI am adjusting colours on photos with Photo Paint X6. When I try to save with original settings the OK button in the "Export to JPEG" dialog box is grayed out. There are no error messages or hints on the screen as to what to do to proceed with the save JPEG with orginal settings.
View 7 Replies View RelatedI am drawing pictures for the Second life game. I need that the file I export to be exactly 512 X 512 pixel, and TGA format. Of course, the objects in the picture are small, and don't use al the 512X512 space.But even when objects don't use all the space, I need my "small objects within the 512X512 size file.
Although my picture is, in corel draw 512 X 512, when I export to TGA , I have no the good results.I use yhe File/export/menu and define TGA Bitmap for format.
On the following menu,
if I click on "Maintain original size", Objects remains with original size, but the file size is reduced to fit around the objects..
If I click on "Maintain aspect ratio",, I can fix the size file to 512X512, , but the objects are streched to fill the 512X512 file.
The only way I found to avoid resizing is adding a 512X512 transparent object on the background, but I wonder if there is a better way to do it.
Recurring problem i'm having with bitmaps im trying to export to our large format printer. Some bitmaps are coming up with a grey type filter or lens that corel is automatically putting over my photo.
When i export this' filter' remains on the picture.
If i hit 'edit bitmap' the photo comes up normal with all the colours as it should be. Hit 'save' and it goes straight back to having a grey filter over it? Its only with some photos and the other ones are the same profile on the same page? It seems to be always the physically largest one in size (not dpi) I have tried converting to a cmyk bitmap instead of RGB.