I chose to add the ico file format to my options for export in Photo-Paint, but when I go to export, it is not in the drop-down menu. What I need to do?
View 3 RepliesI have created a Marketing presentation in corelDRAW now I want to export it in MS Word format with as it is look and feel and editable text.
View 2 Replies View RelatedWhen I try to export a bitmap to PSD format or import a PSD file, the filter list does not show any import or export for Photoshop...what gives?
Corel Draw X5 version 15.20.686
Corel Draw Sign Designer
Recurring problem i'm having with bitmaps im trying to export to our large format printer. Some bitmaps are coming up with a grey type filter or lens that corel is automatically putting over my photo.
When i export this' filter' remains on the picture.
If i hit 'edit bitmap' the photo comes up normal with all the colours as it should be. Hit 'save' and it goes straight back to having a grey filter over it? Its only with some photos and the other ones are the same profile on the same page? It seems to be always the physically largest one in size (not dpi) I have tried converting to a cmyk bitmap instead of RGB.
A client says she needs a graphic in EPG format, and the only thing I can find is related to electronic program guides.
View 7 Replies View RelatedHow to save as coreldraw file in .tiff format
View 6 Replies View RelatedA .cdr file from CDX6 when "Saved as" .cmx format can be opened in early version of CD?
Why .cdr when converted to .cmx format file is smaller (in KB)?
What are main differences cdr/cmx?
How do I go about converting my CDX5 file to EPS8 format so that I can start submitting some of my work as vector stock to canstockphoto website?
View 2 Replies View RelatedCorel draw X5 and X6 is not able to show me the preview of PSD file format.
View 9 Replies View RelatedI am drawing pictures for the Second life game. I need that the file I export to be exactly 512 X 512 pixel, and TGA format. Of course, the objects in the picture are small, and don't use al the 512X512 space.But even when objects don't use all the space, I need my "small objects within the 512X512 size file.
Although my picture is, in corel draw 512 X 512, when I export to TGA , I have no the good results.I use yhe File/export/menu and define TGA Bitmap for format.
On the following menu,
if I click on "Maintain original size", Objects remains with original size, but the file size is reduced to fit around the objects..
If I click on "Maintain aspect ratio",, I can fix the size file to 512X512, , but the objects are streched to fill the 512X512 file.
The only way I found to avoid resizing is adding a 512X512 transparent object on the background, but I wonder if there is a better way to do it.
having some nice flyers printed at Office Depot. They do not accept CDR files (practically nobody does),
so which format would be best? they take pdf, illustrator etc. the flyer is text plus high quality pictures of art.
I just upgraded from 12 to x5 and for some reason it looks like Corel has chosen to make the file default to only showing the page as the thumbnail. Whereas before the entire file was displayed in thumbnail. This would work fine as long as you only want to keep your design elements all within the page frame, but I don't know one Corel Designer that does that. (only Word and Publisher users do that because they have to)
View 3 Replies View RelatedI have just upgraded to X6 from X5.
When I export a PDF the dialog window no longer opens and offers me the choices for crop marks, bleeds and so on!
This all use to work fine in X5.
How can I get this to start working properly again.
After finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
I have upgraded to X5 from X3 , and now when i Export EPS files, they are MASSIVE, I work in a company that does signs, and car vinyls and other graphics /vector related work, and It is important that i use EPS as file format for out " plotter" but a size of 800 mb and 2,2 GB now when it used to be 10 mb is insane.
I also use POSTSCRIPT 2, as 3, makes the file over 2 GBs.
I try to export an illustration to eps with bounding box. When I import this e.g. with ghostscript, I get an error output like this:
GPL Ghostscript 9.05 (2012-02-08)Copyright (C) 2010 Artifex Software, Inc. All rights reserved.This software comes with NO WARRANTY: see the file PUBLIC for details.Displaying DSC file C:/Users/thomas/Documents/Konferenzen/ROSE2012/Grafiken/square.epsDisplaying page 1Error: /undefined in 1,00Operand stack:Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval.
[code]....
The problem seems to be at line "1,00 setflat".
I am using CSG X4 (SP2+hotfix) on a Win7 (32Bit) machine. I tried the following to figure out the problem:- varying export settings- using different programs to import (Ghostscript, Acrobat, CorelDraw)- trying complete re-install of CGS X4- changing the computer using the same version of CGS It seems that the eps export interferes with some system settings or installed printer drivers, but I am not able to isolate the problem. I would expect that the export filter is self-contained.
I tried to reproduce the problem with minimal content. The difference between the produced eps files may isolate the problem. A simple cdr-file, the produced eps-files and a snapshot of the used settings are in the zip-file located at URL....I assume that the eps files are built up from different resources but I cannot locate the involved files.
I prepared my drawing for size A0 (841 mm / 1189 mm) but when exporting it in Jpg or Tiff format for printing, it happens something very strange. In the dialogue window it doesn't allow a bigger size than A1 (594 mm / 841 mm). It shows me 74 % for width and height parameters. I try to change it to 100 % but it turns back to 74. Now I cannot print it because I need the bigger size.
View 9 Replies View Relateda tip for solving the problem of exporting an image as a tif led to another question. One solution to export as tif was to create a macro. See that solution post here: [URL] .......
It says : Step 1Run the built in macro. (Tools > Macros > Run Macro). In CorelDRAW versions prior to X4 (Tools > Visual Basic > Play). Select ‘File Converter’ macro from the ‘Macros in’ list and click ‘Run’
However in my macros drop down there are no macros. how can I get a file converter macro?
i make a design in coreldraw x5 and export to pdf but i don't know the seeting how i compress pdf file size...so then its size is too large.
View 1 Replies View RelatedI wish to use the Corel X5 program for all of my engraving and sign business. I've been using a program, sign lab, where I export graphics in the plotter format to my Xenetech system. I will continue to export into my Xenetech. I found that the X5, export PLT only allows an outline but no real fill capability. I need a better program and here I am. Is there a better file format within Corel X5 to fill a graphic or font to accomplish this task?
View 5 Replies View RelatedWhen I select "Save As" or "Export", the list of available file formats is only a fraction of what the help file shows as supported file formats. The help file instructs me to use the instructions in "To modify or repair a CorelDRAW Graphics Suite installation" but this does not work. How can I get or verify that all the file format filters listed in Supported file formats are installed in my CorelDraw 15?
Right now I am particularly interested in saving a CDR in the Visio (VSD) file format, but I would like to have of them available.
(CORELDRAW X6.3) Today I tried to export a .jpg file (text file) for a banner that was 6ft x 18ft. The export function wouldn't allow the 18ft, but changed it to like 9ft.
Tried in same in X3 and had the same result.
I could export the file as a .pdf and it worked just fine.
The question is, is there a maximum export size?
I've recently got a new computer, and after installing corel on it, I've found that I am unable to open files with corel, as soon as i press the open button corel crashes, but i am able to open the files when i goto the actual file in my documents and click open in there, and i am unable to save files any way whatsoever (due to crashing isues again) i am also unable to export my artwork to a jpeg, also an immediate crash.
View 8 Replies View RelatedI have artistic text on a simple schematic diagram that I am trying to export out as a .cgm file, but the lines convert from solid lines to dashes and the vertical text does not stay in place after the export.
View 1 Replies View RelatedThe file extension .sbj was used by Micrografix products, and Micrografix has since become a part of the Corel Corporation. I have thousands of these files. How can I use them in CorelDraw X5?
View 1 Replies View RelatedIs there an updated copy of the macro Paste from AI anywhere to be found?
The one at Oberon is only for X4 but seemed to work in X5 but not X6.
Will Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
I'm working on coreldraw x3 and when I try and use one of my installed fonts such as LHF Lincoln it's in the drop down menu but once I try and change text to the LHF lincoln font the sample text goes blank. When I find the LHF font in the drop down menu it doesn't show an example of the font style like the rest of the fonts I have installed. I tried to reinstall but no luck. Any font I have installed that doesn't show a preview of the font, I can't use. Most of them are OTF fonts but I have other OTF fonts that work fine. Why a font in my font list shows up but goes blank when I try and apply the font style to some text?
View 5 Replies View RelatedI am having problem in coreldraw x5....... OTF fonts are not showing in X5.
View 4 Replies View RelatedI have an image from a magazine that is 9" X 7.5" and want to scan it so that I can get the best resolution from it and be able to place it on a banner that will be 3ft X5ft.
In what format should I scan it ? JPEG, TIFF, or PDF
im using coreldraw x5 since last year but recently when ive tried to open uniform fill tool (***+f11) the separate window isnt showing up. is as if it is invisible because i would have to press esc to continue back to my work. the only pop up window that does work is fountain fill (f11) the rest such as option (ctrl+j) doesnt pop up
View 1 Replies View Related