I want to get a version of coreldraw, but can't afford x6, I need to be able to create high resolution pdfs and pngs and also to create stuff in CMYK. Can I do this in x3 or do I need to splash out on a newer version.
View 3 Replies
I have to design a billboard that needs to be 8ft by 20ft. What size layout should I design it in? I know I need to make sure my pictures are high resolution so it can be blown up to the proper size, correct?
View 5 Replies View RelatedOK, I'm creating a tradeshow graphic for a client. I designed the whole thing in Illlustrator CS6. But for the proof, I used a low res image of the sky (before we purchased it). Everyone was happy. It was a low-res RGB image imported into Illustrator, then the whole thing was exported as a pdf.
Once they approved it, I purchased the high res image. RGB. Same image... just high res. I popped it into the Illustrator file and exported it in exactly the same way. But now, the image looks much more purple. The low res pdf showed it as much brighter, lighter blue.
My client prefers the lighter blue. When I look at the two images in Photoshop, they look the same (in terms of color). should I be worred? Why is there such a color difference?
I need to make PDFs in PageMaker 6.5 that I can import into CorelDraw12. When making the PDF I have selected "embed all fonts" (I do not have the "convert to curves" option.) but the fonts are not being converted to curves. When imported all fonts display in Corel as artistic type or are substituted. Is there a way to convert fonts to curves in Pagemaker?
View 2 Replies View RelatedWe have not been able to work out why hot-linked URLs saved in a document refuse to come across to the exported or printed and distilled PDFs in any multipage documents with facing pages set to on.
It will work with facing pages off. This looks to be an issue that requires a fix.
I have a question about exporting pdfs from coral (X3) with hyperlinks / bookmarks. I'm trying to prepare a presentation which has to be in pdf. In that presentation I want To attach a menu with links to chapters and basic 'next page', 'prev
page' buttons. As for now I did not succeed to do this in coral : When I export to pdf with applied internet hyperlinks to pages, my pdf reader (acrobat reader) is trying to find an external file rather than skip to a desired page in that pdf. To make this clear enough i attach a simple version of what i want to achieve.
If I open a 4-page PDF in CorelDraw, I can edit anything in it. But if I save my changes, it saves as a 4-page cdr file. But I want to save the changes to the PDF. Is the only way to save the changes to the pdf file to re-publish the whole 4 pages to PDF again and have it replace the old one when asked? Wouldn't this further compress any jpgs?
Re-publishing the whole thing and changing the settings to no compression (and remembering to reset them back again later!) seems very inefficient......The question, of course applies to single page pdf's as well, but I'm thinking of deleting or adding a page or changing page order.
I like my coreldraw x4. This sign shop actually has a copy of x5 but it was so so so so awful that we had to take it off of the computer.
I am having more and more problems opening pdf's. I end up with a rectangle with a line across the corner. I'm assuming the people sending have newer adobe than what x4 can handle? I can open the pdf;s in adobe reader but only give option to save as pdf. I just looked and it says PDF VISTA . Is there a way to save them as an older one? Kind of how corel draw can be saved as an older version?
And for some odd reason, on one of the computers (the one that has the email that these pdf's come from) doesn't show them with the pdf icon on the desktop. It has the green corel draw icon instead.
Photo paint uses an absurd amount of CPU when drawing a line; the brush "lags" and stutters about the screen, too. My system CPU is a Core i7-2600k, and all 8 threads are maxed during the drawing of the line. Why would this be?
Screenshot: [URL]......
exporting my CorelDrawX6 files as a high quality jpg for large scale printing purposes. In X4 it was very easy - just export as usual to the highest quality cmyk jpg and open in Photo Paint... now when I export this way it takes forever to bring up the preview page and most of the time it ends up being blank. Sometimes even crashes. I have played with all options in the filter dialog menu that I can find but nothing works. Thought it might be a file size problem but never had that problem in X4 and anything under 200dpi will not be high enough quality.
View 11 Replies View RelatedI am trying to do a bitmap trace of an image. The resulting vector is OK, except that, between every shape of a single color, there is a line, and that line is made a color, either transparent, or a specified color - and thickness.
The preview creates a desired result, but the end product is the problem. When I click on the vector, I can change the color of the lines between the colors in the vector, and in the dockers, I can change the thickness to "none" but a line still exists between the shapes. The previews are just fine, what can I do to make this guy not look like a puzzle? Its as if the shapes in the vector do not touch each other. The previews show no lines between the shapes/colors, except in the final output.
If I import a custom bitmap into Coreldraw, as linked image, the resulting image is very coarse.
If I import all content, the resolution is preserved.
Is that possible to increase the preciousness of linked images to reflect original?
I have an image from a magazine that is 9" X 7.5" and want to scan it so that I can get the best resolution from it and be able to place it on a banner that will be 3ft X5ft.
In what format should I scan it ? JPEG, TIFF, or PDF
Is there a way to export at a lower resolution or to change the resolution in some way so the resulting PDF isn't so large?
View 5 Replies View RelatedI create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
what the resolution is on the screen in Pixels mode? Where Corel finds the value of resolution?
View 11 Replies View RelatedI am producing an 10 x 5 foot trade show display for a client. Even though the image they chose is relatively large (18.7" x 12.5" at 300 dpi), when scaled up it will be about 64 dpi at final size.
I've read that such displays typically use 75-100 dpi images. Where do you find ultra high res stock images? The one we are using is from Istockphoto.
I am playing with this at the minute but thought I would upload an image I am having trouble with. Learned 'flattening' with effects on top of other images - my problem this time is that we need a ghosted part of an image - my boss has done a 'glow' rectangle but i cannot 'flatten' it as it is sitting on top of a vector image!
I am going to try and split the vector image and fill it with a fountain fill but unsure if this can be done.
Been a CorelDraw user for a long time. Just installed x6 (previous X4), and tried to export an image to jpg. X6 seems to have this dialog box with all these presets. How do I manually set my resolution, pixels, etc. as in the previous versions?
View 4 Replies View RelatedI have a question about using the outline trace function and resolution of images.
Say for instance, I am trying to create an existing logo for a customer in which I have to pull the image off the internet. I am unable to find an image that is high resolution, so I pick one with a lower resolution, because after all, I am going to trace the logo to cut out on my cutter with a heat transfer application. It is a simple design, a heart for instance. So when I use Corel Trace, no matter how small beforehand I make said heart, when it traces it comes out jagged, like the pixelation you see on a low res image. Is there any way to smooth this out? Or do I just need to look harder for a higher res image?
When I try to convert any object to a bitmap, the resolution is highlighted but doesn't workif I want to change the existing resolution. I have to RESELECT the numbers to export to another resolution as if the resoltion WASN'T highlighted.
View 8 Replies View RelatedI'm working on a graphic image, but I'm using a bit of photography in it. My problem is that the .jpg I get from the Save as, is not large enough. If I had to start all over, should I create a larger document or is it alright to enlarge the image size and the graphical element itself?
View 1 Replies View RelatedI do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
I have copy AI objec to coreldraw using paste. The resolution is very low. How do I copy it in high resolution?
View 2 Replies View RelatedI'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...
Original texture:
[URL]
The image to be colorized:
[URL]
I am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?
View 1 Replies View Relatedi have some big .jpgs with low resolution say 10x10 inch at 72dpi.
is it possible for me to convert it to 2x2 inch at 300dpi?
I use PhotoShop 7.0 and PageMaker 7.0 to do graphics (I'm old).
I need to buy software that will create high-quality pdfs from my PageMaker files.
Publishing to PDF as single sheets for insertion into other documents or page managers (such as Indesign) works fine, apart from the fact that it makes crappy work of JPGs should any be embedded in the CAD file. Plotting individually using high quality PDF settings also works but it's difficult with large sets.
Therefore, I would like to publish a tab set to PDF using the plotter named in page setup. However, what this does, is it forces me to pick the file name and locaiton each time, rather than using the one specified in the publish dialog. Is there a way around this? That is, can I make the named plotter behave like the "DWG to PDF" one (that is, name the files automatically)?
If not, can I make the "DWG to PDF" one not compress JPGS?
As to why - I work in a mac environment and everyone draws in Illustrator. I use CAD and many times, for large projects, need this sort of page management. And every once in a while, I need to insert a rendering into a CAD document and then publish.
When I save a PDF file in Photoshop CC in CMYK color with JPEG compression (quality = high), it will save without any errors. However, when I open the file in Acrobat, I get an "Out of Memory" pop up error. I press Ok, and the document is just displayed as a blank white image.
I'm using Win7 64-bit, Photoshop CC 64-bit. Plenty of memory (24GB) and allocated RAM in preferences, and I've done some troubleshooting that leads me to believe the error is not due to system memory, but rather a specific bug in the software. I have Photoshop CS6 on the same machine, and if I open the PSD, save as PDF with the above settings, everything is fine when I open it using Acrobat. This seems to just be for Photoshop CC, not CS6.
Here is the troubleshooting I've done so far:
PDF format, RGB color, any other settings --> Acrobat can open the file.
PDF format, CMYK, no compression --> Acrobat can open the file.
PDF format, CMYK, JPEG compression [medium] --> Acrobat can open the file.
PDF format, CMYK, JPEG compression [high] --> Acrobat can NOT open the file because it encounters the "out of memory" error.
PDF format, CMYK, JPEG compression [maximum] --> Acrobat can open the file.
I created a graphic to use on the web (72 dpi), client called and now they want to print it postcard size so they can mail it out. The Original image is 480 x 611.
Most of it is just text and a few rectangle marquee boxes to give color. There are three pictures used. What's the quickest way to replicate this? can I just create a new document at 300dpi and drag all my layers(except the pictures) into it from the low res one or do I have to recreate everything?
