I have recently switched from a PC to Mac and reloaded my CorelDraw 11 software onto my Mac. I have been importing tiffs into my document but am unable to use any of effects tools. What I can do to get this software working on my laptop. I am running OSX Leopard.
View 4 RepliesWhen importing a multi-page pdf or ps file into a multi-page document, sometimes the inserted pages will all have their Document Grid layer visibility turned on, even when the existing pages in the document all have it turned off.
If I bring up the object manager, I can go through the affected pages and 'un-eye' them one page at a time. But it's a blooming nuisance, especially when importing dozens of pages at once.
Resetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
View 14 Replies View RelatedI recently have installed Corel Draw x5 and everything was working perfectly fine when all of a sudden it stopped opening .cgm files. It will pop up the message of Corel Draw has stopped working and then I click OK and it closes the program. Every other file extension I have tried opens prefectly fine.
Here are a couple of things that I've done so far:
1. Reverted back to a Default Workspace.
2. Closed out all Dockers.
3. Reinstalled entire program and all features. Updated all patches and Clean booted the PC with only MS Services running. (As instructed by Corel Support)
Temp. Drive Full, File Copy Error?I got this error in CDR XIII. I have checked my Temp Drive Folder in C: I have sufficient space in hard drive but this error occuring again & again & I could not save my hard working graphic files.
View 9 Replies View RelatedI am fairly inexperienced using Corel. I work with Corel in a technical capacity for my job. We use it to transform DXF (AutoCAD) files into image files that can then be imported into another very specialized program for weaving.
The problem I am having is this. I would like to be able to export image files from corel that have a specified height, in pixels, larger than 10,000. In the woven program, the pixels of the incoming drawing have a real, physical representation. Namely, the number of pixels wide and high in the drawing translates directly into the number of yarns wide and high in a woven cloth repeat (weft (pick count) and warp (end count) for those who are familiar). We have some designs that require the length be longer than the 10,000 limit, and until recently we have been working around this by resizing ("scaling") the image without keeping the aspect ratio in the woven image editing program. This does ok, but when the lines and curves in the drawing get "stretched," they become very uneven and this is frustrating.
We cannot use jpg file formats because when the lines and curves of a dxf file are converted to an image and then exported from corel as a jpg, the lines do not remain smooth and complete. In other words, they become a series of standalone dots. This severely complicates working with the image in other steps. Currently, our standard is to use .tif files, and .bmp files also seem to work. However, neither seems to allow the exportation of images in excess of 10,000 pixels long.
Is there a different way we could be creating these images in order to get the type of accuracy we are looking for? DXF files have to be successfully made into image files that maintain the proportions set out in AutoCAD and which also are longer than 10,000 pixels.
Is there any way for CorelDraw X6 to export very large TIFF files? e.g. greater than 30,000 pixels in each dimension? I am currently running X5 on XP 32-bit and it cannot seem to handle it, even though Photo-Paint appears to have the ability.I finally manage to get our IT guys to give me a Win7 64-bit test machine for me to trial X6 64-bit, but seems to only do marginally better than my X5 installation. The test machine already has 7GB RAM installed plus a very, very large drive.I also had to run the same test on Adobe Illustrator and it was able to deal with this very quickly and smoothly, no troubles at all.You may find it hard to believe, but I actually like using CorelDraw :-), which is so far the standard package for our company, but if I cannot get X6 doing what we want, I'm afraid it's the end of the line.
View 14 Replies View RelatedI have a JPEG cartoon image (company logo) that I want to import. When I do the logo goes blurry. Not terrible, but when you zoom in, way more blurry than if you opened the picture in Microsoft Picture Manager.
View 6 Replies View RelatedI have imported a 2d drawing of a vehicle into coral draw x5 from auto cad. Problem is that when I zoom in all the lines do not seem to be joined especially curves, this in turn makes it a pain when filling with colour. I have recently traced one side manually using line and curve tools but my question is, is there s quicker way of tracing a dxf without manually doing it? And if so how to do it?
View 4 Replies View RelatedIf I import a custom bitmap into Coreldraw, as linked image, the resulting image is very coarse.
If I import all content, the resolution is preserved.
Is that possible to increase the preciousness of linked images to reflect original?
Marshall's Burger Logo (Red Background).pdf
I receive a PDF file from my client which is their logo.
The text is suppose to be vector, but they appear as bitmap and I cannot apply fill and outline to it.
I can edit the nodes with the Shape Tool after I converted it to AI or EPS format, but still cannot apply fill and outline.
I'm trying to add perspective to photos (JPEG files) imported into CorelDraw.
I want to change a photo so that, rather than facing 'head on', it looks as though it is facing away at an angle.
I can skew basic shapes to give the impression these have perspective but I can not do this with JPEG files. How to acheive this in CorelDraw or CorelPhoto.
The imported file is probably from Illustrator. The vector element in question is text converted to curves with a CMYK bit map fill. CorelDraw X5 seems unable to extract the bitmap fill from the vectors. What's up with this, is there anyway to extract the bitmap fill?
View 3 Replies View RelatedHow can I make an imported scan of a line drawing "transparent" and add color fills to various sections, using the freehand tool ? I have done this many times with an older version of CorelDraw, but in CorelDraw- x5 the
imported scan includes a white background (even when I select NO FILL), so that my freehand tool selections are either on top of, or hidden behind the white background.
Just got my new laptop and X4 to run. Now i have a problem, i can´t install Embroidery effects? It needs CDGS 12 or X3
Why why why, doesn´t it install over X4? Is there anyway that i could install it? My previous version was CDGS 12 and Embroidery + KPT installed and they worked well.
X4 seems to be much better than 12 at first test...
I have been using Coreldraw for several years now to create maps, but I am not good with the artistic tools, I need to create something like the attached "Back to Future" photo, specially the fire & lightning effects, I am planning to replace the car with another object.
View 3 Replies View RelatedI joined to seek out a solution to why my tools under Image or Effects don't bring up a tool dialog, ergo no adjustments can be made with these tools.
My configuration:
Corel Draw Suite 11 Build 11.633
O/S: Windows 7
Other S/W installed: Adobe Photoshop Elements 9
macros are all disabled and i remembered there is a command to disable all the events but i could not figure out where exactly it is located and even i tried to reinstall the using modiy and repair twice times to install the software but still persists to activate the macros.
all the macros are grayed out and even Alt F11 also not working.
I have set the automatic backups to end up in a specific folder on an external hard drive, which is always on. However, none of the auto backups end up there. They end up in the same folder as the actual file on my regular HD - which absolutely defies the purpose of having a backup on a different medium. I wish I could attach a screenshot of the setting page to prove my point, but Corel has not advanced to that level yet as it seems. Not even in "Support", which, unless you own the latest version of a Corel software, is non-existing anyway.
View 3 Replies View RelatedEvery time I go into Corel Photo-Paint x5 and try to use Cutout lab, there's no pop up window with the lab, the program stops working until I hit escape. I have a lot of cutouts to do.
View 3 Replies View Related I'm assuming eye candy is not working in x6 because x6 is now true 64 bit.
how to install the 64bit eye candy so it works in Corel PP x6?
Win 7, 64 bit, 16G Ram
A graphic exported in Draw & PP in X4 as a .png works fine.
The same graphic copied & pasted into Draw or PP in X6 does not.Repeatable 100%...The eyedriopper selection of the transp[arent color seems to pick up the right color, but the output presents like a .jpg. Viewed in IE9, Firefox & Chrome with same results.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
I work in pre-press for a Label Printing company and we do Flexo and Screen printing. I get files from designers, most files have been created in Illustrator.
I use Corel Draw X5 to do my pre-press work and some of the files I get have Lens effect objects. When I apply the "No Lens Effect" the object changes to a Symbol and it has no fill and no outline, how do I convert the Symbol object to a "regular" object?
I want to know the best way to convert these Lens and Symbol objects to regular objects that are "flattened" or do not have transparency. I need to be able to work with these objects like they are a regular vector object that can be edited for pre-press to make files to send to have films output.
OR, will an object that has a Lens effect output normally if I make a Postscript file fro the Lens effect object? Do I even need to convert the Lens effect in order to get the image to output correctly?
When I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
The scanner shortcut doesn't work unless you go to acquire first. It keeps working until you close CorelDraw. When you reopen Corel, you must then go to acquire first.
View 2 Replies View RelatedThe brush tool is no longer working - when I select on any of the brush tools, spray, Art burhs, spray , line, marker etc, they will not work. When I select the drop down nothing is listed. Additionally, none of the other tools in the box, Effect Tool, Image Sprayer too ect, do not work as well. Did I select something to turn off the tool?
I've tried to uninstall and re-install and that did not work.
When I try to draw an ellipse (or circle) and drag it on to my sheet, nothing happens. All of my other shape tools work as they should. What has happened. It worked originally.
View 4 Replies View RelatedI have uninstalled and reinstalled my x5 and while it fixed the error causing my default text cursor to start at 270 degrees for some reason instead of 0, I still cannot edit ANY font text as far as the kerning goes. When i drag it, it snaps right back everytime. This is extremely frustrating when aligning text to a curved path and all the letters are squished together.wth? This just happened in the last week randomly.
View 1 Replies View RelatedFor years I have used the clone tool happily which has been great for touching up photo's on Photo-paint 12
A few days ago - imported a jpg into Paint as usual, went to use the clone tool and it just doesn't work any more. I can select the icon and the little circles come up but it just doesn't 'clone' anything. Its as if there is mysterious setting that has been turned on that just makes nothing happen.
I have reinstalled the software: no luck - still the same.
I am working with some very large images in X5, ~ 2500 mm x 1200 mm at up to 600 DPI sometimes. (And before you say it, yes, I do need this. It is a very specific application that we work on daily and I do need the ability to basically control every single pixel at that size & that resolution). I'm using WinXP 32-bit (company mandate).
When I need precisely sized objects, I am using CorelDRAW and occasionally when I need pixel perfect placement, PhotoPaint gets the call. The images may go through both before it runs through a final backend processor (some specialized software) and then going to print.
The problem is that I am running into limits when I go beyond 300 DPI (depending on the image dimensions). For example, CorelDRAW often will fail to export a TIFF correctly when I try a 450 DPI image at that size (some TIF file comes up but nothing can load it, it's corrupted). Or for even smaller images, if I enable transparent background, I also get a similar problem. Sometimes, e.g. Photo Paint, just chokes up with out of memory problem and fails to load images at all.
Thing is, we actually have Photoshop CS5 available and while there are many things I don't like about it, it actually can handle stuff of this size. So there is also a push to get Illustrator as well under the same assumption that it will work. However, Adobe stuff is way more expensive, feels more bloated and slower and (for me at least) a pain to use compared to Corel, so I'd rather not.
Would moving to 64-bit WinXP work? Or would I need to go to CorelDRAW X6? This is already a quad-core machine with 4GB of RAM.