Just got my new laptop and X4 to run. Now i have a problem, i can´t install Embroidery effects? It needs CDGS 12 or X3
Why why why, doesn´t it install over X4? Is there anyway that i could install it? My previous version was CDGS 12 and Embroidery + KPT installed and they worked well.
X4 seems to be much better than 12 at first test...
Scanned from a cap:
Let not the one who says it can't be done interrupt the one who is doing it.
I have used Corel X3 on a XP & Vista machine with the Draw stitch Embroidery Effect plug-in. However, when I install it on Windows 7, the Embroidery Effect is not showing up in Corel, even thought both programs seemed to install successfully.
View 14 Replies View Relatedfontnav_windows_fonts.png
BFN does not install again some fonts (font family) in windowsfonts folder. Please take a look attached screen capture. There is only Open command or windows context menu when click right mouse button.
I'm trying to install SP1 into corel draw x3 on vista. Installer screen says
"The upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exsists on your computer and that you have the correct upgrade patch.
Patch CGSX3SP1.msp
Coreldraw ver. 13.0.0.739
I recently installed Win7. I then downloaded the trial version of X5 from Corel's site and tried to install it. The splash screen I get has no caption on the "install" and "cancel" buttons. When I press the "install" button I get nothing, it goes nowhere. When I press the "cancel" button it cancels, moves to a cance screen from where I can only exit by clicking the top right close icon.
View 10 Replies View RelatedWhen I start CorelDraw x6 there cames a message that I must log in for installing the WebsiteCreator. But when i do this I am logged in but nothing more.
View 3 Replies View RelatedI must have tried installing CorelDRAW X5 a dozen times on Windows ultimate X64; but it wouldn't. I always get an "incomplete installation". At 58% and 62%, I get an "error 1721" message saying that there is a problem with the Windows installer package and it couldn't "register" or "unregister".
View 13 Replies View RelatedMy first post, but long time user of Corel starting V12
Current: corel Draw Graphics Suite X5 SP2OS Vista 64 bit SP2 one user. with admin privileges Updated X4 to X5 in May 2010 and then upgraded to SP2 when released
Occasional crash and slow to open all services. I use Corel every day, cannot live without it.Runs days with many files created with no restart.Then during day of 20/May/2011 A new file saved could not be opened. ( silent no warning ),
All Old files Open OK, templates open OKany new file made since cannot be opened. No Known install or updates on the day or days prior to issue.Ran repair. Issue continued unchanged.Eventually restated with F8. But new files again not opening.Updated user default settings no change with issue.I did notice long delay in saving new file longer than normal.
Restarted Corel Draw, which now Hangs on stat up ( Loading users settings stage )Restarted machine same problemUninstalled X5, Restarted, Re installed X5 Install OK. Open Corel Draw or Paint, both hang on start up as aboveUpdated with SP2 same hang on start up. The only working X5 items BitSteam font navigator and CONNECTGrouped all fonts with bitstream, set with minimal basic fonts installed. Restarted again hangs same on start up
Repeated Removal, Checked Regedit all entries gone for X5 ( previous X4 Removed but some entries exist in registry for X4 )Deleted all CorelDRAW Graphics Suite X5 folders in programs and User app folderRestarted and reinstalled. Again hang on start upTested in Safe mode again hang on start up.No other issues machine running well, No Registry errors (Uniblue), Use Kaspersky PURE for virus and security
Event report:-
The program CorelDRW.exe version 15.2.0.661 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Problem Reports and Solutions control panel. Process ID: 11c4 Start Time: 01cc176e05fac2c3 Termination Time: 21
I just got a new system installed corel draw fresh, loaded all my gms's , imported workspace , great all work as before all my menus are nice and active...,
However my custom gradients have disappeared..., it took me a while to set up certain gradients and I removed lots of the useless default ones that were there preset in the previously installed corel draw.
I accessed my old hard drive and found the gradient preset file however when I copied and replaced with the old gradient file the gradient data is not there....
location C:Program FilesCorelCorelDRAW Graphics Suite X6DrawPresetsStyles - FountainFills.cdss
is there another location where my old gradients would be saved?
After installing windows upgrades on win 7 (64-bit) my Corel X6 products have gone mad.When i try to open Draw or Paint the program loads to the splash screen and locks.the splash screen is black and the program does not respond anymore.I tried to uninstall the X6 Graphics suite but the uninstall screen is Black as well..I tried to uninstall every windows update to the date the problem started, but no luck.I have too much info on my computer to do a whole install of all programs.
View 12 Replies View RelatedI've always wondered, what does Bitstream Font Nav do, and why do I want to install it?
View 15 Replies View RelatedI removed Font Navigator before updating to version 16.4 because it didn't work well you know. But now I want to install it again.My system is 64 bit.
What if I install it from CD, because on CD there is the older not fixed version of FontNav and I don't know what to do next.How can I update it after installing it or I have to remove all Corel programs, reinstall them and update to 16.4?
i'm running on WIndows XP X64 SP3 AMD ATHLON II 64 - Mem 4Gb), i had install .net framework 4 and i've tried to install Corel Draw X6 64 bit on my system but the screen always shown the warning message "your system has been not modified, the processor in your computer does not meet the minimum system requirement". Is it because of Windows XP x64 or the processor?
View 7 Replies View Relatedhow or why I am getting this error code when I try to install my software. I bought Coreldraw Graphics Suite X5 from a seller on Ebay. It is supposed to be new but it was opened package.
View 1 Replies View Relatedi started with the trial of X6, then went on with one month subscription and now I have decided that I want it for real and got the upgrade Box.
The installed version is connected to the subscription and tells me that it will expire in a few days.
Can I unlock this with the serial no. I got from the box?
I've tried this on a windows 7 and Xp Sp 3 system without success. Is there something wrong with the setup file? here is the xp error info:
EventType : clr20r3 P1 : cdrtuning_1.4_en.exe P2 : 1.4.0.0 P3 : 50ab40b4 P4 : mscorlib P5 : 4.0.0.0 P6 : 4ba1da6f P7 : e21P8 : 5a P9 : system.windows.markup.xamlparse
I hate pressing F8 at startup!
Even though the trial installation has been removed, runs through the entire process and then reports that there is an existing installation.... What should I do?
View 4 Replies View RelatedI downloaded X6 patch #1 with no problem, but then I downloaded patch #3 and when I press Continue to install I get a notice: An Internet connection required. connect to the Internet and try again... But I AM connected to the Internet! I have no options how to proceed.
View 3 Replies View Relatedlaunch macros much faster than going through the tools menu.
cs_setInnerHtml('video_84cfecff-edd9-427c-acdf-ab8c387c2f0f','');
I have been using Coreldraw for several years now to create maps, but I am not good with the artistic tools, I need to create something like the attached "Back to Future" photo, specially the fire & lightning effects, I am planning to replace the car with another object.
View 3 Replies View RelatedI joined to seek out a solution to why my tools under Image or Effects don't bring up a tool dialog, ergo no adjustments can be made with these tools.
My configuration:
Corel Draw Suite 11 Build 11.633
O/S: Windows 7
Other S/W installed: Adobe Photoshop Elements 9
I have recently switched from a PC to Mac and reloaded my CorelDraw 11 software onto my Mac. I have been importing tiffs into my document but am unable to use any of effects tools. What I can do to get this software working on my laptop. I am running OSX Leopard.
View 4 Replies View Related I work in pre-press for a Label Printing company and we do Flexo and Screen printing. I get files from designers, most files have been created in Illustrator.
I use Corel Draw X5 to do my pre-press work and some of the files I get have Lens effect objects. When I apply the "No Lens Effect" the object changes to a Symbol and it has no fill and no outline, how do I convert the Symbol object to a "regular" object?
I want to know the best way to convert these Lens and Symbol objects to regular objects that are "flattened" or do not have transparency. I need to be able to work with these objects like they are a regular vector object that can be edited for pre-press to make files to send to have films output.
OR, will an object that has a Lens effect output normally if I make a Postscript file fro the Lens effect object? Do I even need to convert the Lens effect in order to get the image to output correctly?
I get the following error message when I attempt to update X6. Not sure what to do about it.
CRC error: The file C:ProgramDataCoralDRAW Graphics Suite X6.1CGS16w_cproc_p_11.1.048_redist_intel64.exe doesnt match the file in the setup's .cab File. The medium from which you are running the setup may be currupted; contact your software vender.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.