I must have tried installing CorelDRAW X5 a dozen times on Windows ultimate X64; but it wouldn't. I always get an "incomplete installation". At 58% and 62%, I get an "error 1721" message saying that there is a problem with the Windows installer package and it couldn't "register" or "unregister".
View 13 Replies
i'm running on WIndows XP X64 SP3 AMD ATHLON II 64 - Mem 4Gb), i had install .net framework 4 and i've tried to install Corel Draw X6 64 bit on my system but the screen always shown the warning message "your system has been not modified, the processor in your computer does not meet the minimum system requirement". Is it because of Windows XP x64 or the processor?
View 7 Replies View Relatedfontnav_windows_fonts.png
BFN does not install again some fonts (font family) in windowsfonts folder. Please take a look attached screen capture. There is only Open command or windows context menu when click right mouse button.
I'm trying to install SP1 into corel draw x3 on vista. Installer screen says
"The upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exsists on your computer and that you have the correct upgrade patch.
Patch CGSX3SP1.msp
Coreldraw ver. 13.0.0.739
I recently installed Win7. I then downloaded the trial version of X5 from Corel's site and tried to install it. The splash screen I get has no caption on the "install" and "cancel" buttons. When I press the "install" button I get nothing, it goes nowhere. When I press the "cancel" button it cancels, moves to a cance screen from where I can only exit by clicking the top right close icon.
View 10 Replies View RelatedJust got my new laptop and X4 to run. Now i have a problem, i can´t install Embroidery effects? It needs CDGS 12 or X3
Why why why, doesn´t it install over X4? Is there anyway that i could install it? My previous version was CDGS 12 and Embroidery + KPT installed and they worked well.
X4 seems to be much better than 12 at first test...
When I start CorelDraw x6 there cames a message that I must log in for installing the WebsiteCreator. But when i do this I am logged in but nothing more.
View 3 Replies View RelatedMy first post, but long time user of Corel starting V12
Current: corel Draw Graphics Suite X5 SP2OS Vista 64 bit SP2 one user. with admin privileges Updated X4 to X5 in May 2010 and then upgraded to SP2 when released
Occasional crash and slow to open all services. I use Corel every day, cannot live without it.Runs days with many files created with no restart.Then during day of 20/May/2011 A new file saved could not be opened. ( silent no warning ),
All Old files Open OK, templates open OKany new file made since cannot be opened. No Known install or updates on the day or days prior to issue.Ran repair. Issue continued unchanged.Eventually restated with F8. But new files again not opening.Updated user default settings no change with issue.I did notice long delay in saving new file longer than normal.
Restarted Corel Draw, which now Hangs on stat up ( Loading users settings stage )Restarted machine same problemUninstalled X5, Restarted, Re installed X5 Install OK. Open Corel Draw or Paint, both hang on start up as aboveUpdated with SP2 same hang on start up. The only working X5 items BitSteam font navigator and CONNECTGrouped all fonts with bitstream, set with minimal basic fonts installed. Restarted again hangs same on start up
Repeated Removal, Checked Regedit all entries gone for X5 ( previous X4 Removed but some entries exist in registry for X4 )Deleted all CorelDRAW Graphics Suite X5 folders in programs and User app folderRestarted and reinstalled. Again hang on start upTested in Safe mode again hang on start up.No other issues machine running well, No Registry errors (Uniblue), Use Kaspersky PURE for virus and security
Event report:-
The program CorelDRW.exe version 15.2.0.661 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Problem Reports and Solutions control panel. Process ID: 11c4 Start Time: 01cc176e05fac2c3 Termination Time: 21
I just got a new system installed corel draw fresh, loaded all my gms's , imported workspace , great all work as before all my menus are nice and active...,
However my custom gradients have disappeared..., it took me a while to set up certain gradients and I removed lots of the useless default ones that were there preset in the previously installed corel draw.
I accessed my old hard drive and found the gradient preset file however when I copied and replaced with the old gradient file the gradient data is not there....
location C:Program FilesCorelCorelDRAW Graphics Suite X6DrawPresetsStyles - FountainFills.cdss
is there another location where my old gradients would be saved?
After installing windows upgrades on win 7 (64-bit) my Corel X6 products have gone mad.When i try to open Draw or Paint the program loads to the splash screen and locks.the splash screen is black and the program does not respond anymore.I tried to uninstall the X6 Graphics suite but the uninstall screen is Black as well..I tried to uninstall every windows update to the date the problem started, but no luck.I have too much info on my computer to do a whole install of all programs.
View 12 Replies View RelatedI've always wondered, what does Bitstream Font Nav do, and why do I want to install it?
View 15 Replies View RelatedI removed Font Navigator before updating to version 16.4 because it didn't work well you know. But now I want to install it again.My system is 64 bit.
What if I install it from CD, because on CD there is the older not fixed version of FontNav and I don't know what to do next.How can I update it after installing it or I have to remove all Corel programs, reinstall them and update to 16.4?
how or why I am getting this error code when I try to install my software. I bought Coreldraw Graphics Suite X5 from a seller on Ebay. It is supposed to be new but it was opened package.
View 1 Replies View Relatedi started with the trial of X6, then went on with one month subscription and now I have decided that I want it for real and got the upgrade Box.
The installed version is connected to the subscription and tells me that it will expire in a few days.
Can I unlock this with the serial no. I got from the box?
I've tried this on a windows 7 and Xp Sp 3 system without success. Is there something wrong with the setup file? here is the xp error info:
EventType : clr20r3 P1 : cdrtuning_1.4_en.exe P2 : 1.4.0.0 P3 : 50ab40b4 P4 : mscorlib P5 : 4.0.0.0 P6 : 4ba1da6f P7 : e21P8 : 5a P9 : system.windows.markup.xamlparse
I hate pressing F8 at startup!
Even though the trial installation has been removed, runs through the entire process and then reports that there is an existing installation.... What should I do?
View 4 Replies View RelatedI downloaded X6 patch #1 with no problem, but then I downloaded patch #3 and when I press Continue to install I get a notice: An Internet connection required. connect to the Internet and try again... But I AM connected to the Internet! I have no options how to proceed.
View 3 Replies View Relatedlaunch macros much faster than going through the tools menu.
cs_setInnerHtml('video_84cfecff-edd9-427c-acdf-ab8c387c2f0f','');
I have three MAC's using Parallels with Windows 7 X64 on a domain. I cannot get Corel Draw x5 to launch on one. It just simply crashes and records Failed to Release Mutex Error ID = Returned Error 288 & 1 in the event log. I have tried removing Corel Draw from the workstation 3x in combination with manual and automatic. I have spent over 8 hours on this and cannot find a solution on line. I have removed user settings as well. I have the original media. I have tried downloading another copy from CNET but the key will not work.
View 14 Replies View RelatedSince I installed Windows 7 I have problems. Files that contain images to CMYK when exported to PDF images corrupted by distorting colors.
View 7 Replies View RelatedI have been having problems updating my Corel Draw 11 Graphics Suite for use on a computer running Windows 7 Pro, 64 bit. It worked fine on the previous computer I was using, which was running Windows XP Pro, 64 bit. I have been to the download site for all applicable patches and service packs for Corel 11, namely, SP1, SP2, Draw11SVGUpdate, and CGS11savefix.exe. When I run the SP1, I get an error message: "the file C:/Programfiles(x86)CorelCorelGraphics11FiltersCRLPDFImport110.dll is not a valid previous version and could not be upgraded" The only response choice I was offered was "OK" and this exits the setup.
When I try to open either Corel Draw 11 or Corel Photo Paint 11, I get the following message: "Corel PHOTO-PAINT(R) [or DRAW] has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." The only "option" I'm given is to push the "Close program" toggle and exit. Windows has never contacted me via email to tell me of any solutions.
I have been using the Corel Draw Graphics Suite for many years - first buying the Full Version of CD5, then upgrading to 8, then upgrading to 11. I have the original "upgrade" discs for 11 which have installed just fine up to now, and I really do not need the extensive features of CGS X5 (which, by the way, works perfectly in the "trial download" form I put onto the computer in question!). I was SO hoping to get the updates on 11 installed so it will work on Win 7 Pro, rather than have to pay $200 for the upgrade to X5 "just" to gain the ability to run Corel DRAW and Corel PHOTO PAINT on this new computer. (By the way, that "just" is a relative term - if it's the only way to get a functioning program, I will have to upgrade - Corel DRAW and Corel PHOTO PAINT are the bedrock of our private printing press work!) Is there any way I can proceed with Corel 11?
CorelDRAW 12 successfully installed on a new machine running Windows 7 Professional 64-bit; however, when attempting to run the SP1 patch (CGS12SP1EN.msp), I get the following message:
"The wizard was interrupted before CorelDRAW Graphics Suite 12 could be completely installed."
I have tried "Corel Draw 12 and vista" which attempted to run the Microsoft installer through the command prompt running under Administrator, but it doesn't work.
am using windows 7 without aero windows. Twice when using Corel draw and saving the program has crashed. I have then had to ctrl alt delete and shut the program down.
View 1 Replies View RelatedI'm having 2 seperate import problems in Coreldraw X5 in Windows 7. The first one, and the one I need to fix immediatly is, every time I try to import a dfx file, the program crashes. The other which is less important right now is, a lot of times when I try to import PDF's I get an error message that says the file is corrupt.
View 2 Replies View Relatedim using coreldraw x5 since last year but recently when ive tried to open uniform fill tool (***+f11) the separate window isnt showing up. is as if it is invisible because i would have to press esc to continue back to my work. the only pop up window that does work is fountain fill (f11) the rest such as option (ctrl+j) doesnt pop up
View 1 Replies View RelatedWhen using Windows 7 (32 bit) and Coreldraw X5, when I zoom up the page, with grid on, and start moving TIFFs around, the grid disappears in that local area. The only option is to refresh the page. So just recently upgraded to Windows 7 64 bit, but no change.
View 1 Replies View RelatedNot to sound entirely ignorant ... but, where is the Corel program folder in Window 7 x64? I went to drive C (no other drives) and then programs folder ... no Corel folder?
I'm trying to get to the GMS folder to install macros...
I want to install ColorDRAW graphics X6 on an Windows 64 BIT computer.
We know that is officially not supported. But is there a workarround available ?If already tried to run in it in compatibility mode on an account with admin rights.That doesn't work.I get an error during the installation:Microsoft Visual Basic for applications 7.1 is not supported.
In Windows 7 I used to be able to see thumbnails of the first page CDR files in Windows Explorer. Now in Windows 8 all I can see is a blank.
View 7 Replies View Relatedlooking for a hot key to step through all open documents, the way you can in windows with alt+tab and hot keys to go through each page in a document
View 2 Replies View RelatedWe purcased X6 and installed on 3 PC. two are Windows XP and one has Windows 8 operating system.
X6 work fine and fast on Windows 8 system.
But both X6 on both Windows XP are nightmare. Just creating new document can take up to 10 sec. Printing is also very slow, but exporting simple JPG file knock-me down. It take half minute or more...
Previous we worked many year's with X4 on same PC's, now we format PC's, Install Windows XP with all service pack's and updates, reboot machine and install X6.
It is not possible to install Windows 8 on those two PC's, because they drive two machines, that only support Windows XP...
Windows XP are 32 bit, Windows 8 is 64 bit
