CorelDRAW Graphics Suite 11 :: Get To Work On Windows 7 Pro 64 Bit?
Aug 7, 2010
I have been having problems updating my Corel Draw 11 Graphics Suite for use on a computer running Windows 7 Pro, 64 bit. It worked fine on the previous computer I was using, which was running Windows XP Pro, 64 bit. I have been to the download site for all applicable patches and service packs for Corel 11, namely, SP1, SP2, Draw11SVGUpdate, and CGS11savefix.exe. When I run the SP1, I get an error message: "the file C:/Programfiles(x86)CorelCorelGraphics11FiltersCRLPDFImport110.dll is not a valid previous version and could not be upgraded" The only response choice I was offered was "OK" and this exits the setup.
When I try to open either Corel Draw 11 or Corel Photo Paint 11, I get the following message: "Corel PHOTO-PAINT(R) [or DRAW] has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." The only "option" I'm given is to push the "Close program" toggle and exit. Windows has never contacted me via email to tell me of any solutions.
I have been using the Corel Draw Graphics Suite for many years - first buying the Full Version of CD5, then upgrading to 8, then upgrading to 11. I have the original "upgrade" discs for 11 which have installed just fine up to now, and I really do not need the extensive features of CGS X5 (which, by the way, works perfectly in the "trial download" form I put onto the computer in question!). I was SO hoping to get the updates on 11 installed so it will work on Win 7 Pro, rather than have to pay $200 for the upgrade to X5 "just" to gain the ability to run Corel DRAW and Corel PHOTO PAINT on this new computer. (By the way, that "just" is a relative term - if it's the only way to get a functioning program, I will have to upgrade - Corel DRAW and Corel PHOTO PAINT are the bedrock of our private printing press work!) Is there any way I can proceed with Corel 11?
View 5 Replies
ADVERTISEMENT
Mar 8, 2012
getting my custom font to work in Corel Draw 11 using Windows 7 OS.
How to get this font to work in their Corel Draw programs. I use this font for 90% of my business so you can see why it's so important that I get it to work with Corel Draw 11 & Windows 7.
View 1 Replies
View Related
Feb 1, 2011
I have three MAC's using Parallels with Windows 7 X64 on a domain. I cannot get Corel Draw x5 to launch on one. It just simply crashes and records Failed to Release Mutex Error ID = Returned Error 288 & 1 in the event log. I have tried removing Corel Draw from the workstation 3x in combination with manual and automatic. I have spent over 8 hours on this and cannot find a solution on line. I have removed user settings as well. I have the original media. I have tried downloading another copy from CNET but the key will not work.
View 14 Replies
View Related
Jan 9, 2012
Since I installed Windows 7 I have problems. Files that contain images to CMYK when exported to PDF images corrupted by distorting colors.
View 7 Replies
View Related
Mar 1, 2011
CorelDRAW 12 successfully installed on a new machine running Windows 7 Professional 64-bit; however, when attempting to run the SP1 patch (CGS12SP1EN.msp), I get the following message:
"The wizard was interrupted before CorelDRAW Graphics Suite 12 could be completely installed."
I have tried "Corel Draw 12 and vista" which attempted to run the Microsoft installer through the command prompt running under Administrator, but it doesn't work.
View 5 Replies
View Related
Jun 23, 2012
am using windows 7 without aero windows. Twice when using Corel draw and saving the program has crashed. I have then had to ctrl alt delete and shut the program down.
View 1 Replies
View Related
Mar 29, 2013
I am new here and I have a problem with the nik filter. I get the NIK Collection by Google with color Efex Pro 4. After installing I can open the filter and work. Everything is ok, but I can not save the picture.
View 10 Replies
View Related
Jun 19, 2012
I'm having 2 seperate import problems in Coreldraw X5 in Windows 7. The first one, and the one I need to fix immediatly is, every time I try to import a dfx file, the program crashes. The other which is less important right now is, a lot of times when I try to import PDF's I get an error message that says the file is corrupt.
View 2 Replies
View Related
Mar 17, 2011
im using coreldraw x5 since last year but recently when ive tried to open uniform fill tool (***+f11) the separate window isnt showing up. is as if it is invisible because i would have to press esc to continue back to my work. the only pop up window that does work is fountain fill (f11) the rest such as option (ctrl+j) doesnt pop up
View 1 Replies
View Related
Jun 9, 2011
When using Windows 7 (32 bit) and Coreldraw X5, when I zoom up the page, with grid on, and start moving TIFFs around, the grid disappears in that local area. The only option is to refresh the page. So just recently upgraded to Windows 7 64 bit, but no change.
View 1 Replies
View Related
Jan 12, 2012
Not to sound entirely ignorant ... but, where is the Corel program folder in Window 7 x64? I went to drive C (no other drives) and then programs folder ... no Corel folder?
I'm trying to get to the GMS folder to install macros...
View 11 Replies
View Related
Dec 14, 2012
I want to install ColorDRAW graphics X6 on an Windows 64 BIT computer.
We know that is officially not supported. But is there a workarround available ?If already tried to run in it in compatibility mode on an account with admin rights.That doesn't work.I get an error during the installation:Microsoft Visual Basic for applications 7.1 is not supported.
View 3 Replies
View Related
Aug 5, 2013
In Windows 7 I used to be able to see thumbnails of the first page CDR files in Windows Explorer. Now in Windows 8 all I can see is a blank.
View 7 Replies
View Related
Oct 16, 2011
looking for a hot key to step through all open documents, the way you can in windows with alt+tab and hot keys to go through each page in a document
View 2 Replies
View Related
Nov 11, 2013
We purcased X6 and installed on 3 PC. two are Windows XP and one has Windows 8 operating system.
X6 work fine and fast on Windows 8 system.
But both X6 on both Windows XP are nightmare. Just creating new document can take up to 10 sec. Printing is also very slow, but exporting simple JPG file knock-me down. It take half minute or more...
Previous we worked many year's with X4 on same PC's, now we format PC's, Install Windows XP with all service pack's and updates, reboot machine and install X6.
It is not possible to install Windows 8 on those two PC's, because they drive two machines, that only support Windows XP...
Windows XP are 32 bit, Windows 8 is 64 bit
View 5 Replies
View Related
Aug 14, 2011
The license agreement is blank. I'm stuck. Been fighting it for a couple of days and I've hit a wall.
View 5 Replies
View Related
Feb 17, 2011
I have used Corel X3 on a XP & Vista machine with the Draw stitch Embroidery Effect plug-in. However, when I install it on Windows 7, the Embroidery Effect is not showing up in Corel, even thought both programs seemed to install successfully.
View 14 Replies
View Related
Mar 9, 2010
I must have tried installing CorelDRAW X5 a dozen times on Windows ultimate X64; but it wouldn't. I always get an "incomplete installation". At 58% and 62%, I get an "error 1721" message saying that there is a problem with the Windows installer package and it couldn't "register" or "unregister".
View 13 Replies
View Related
Mar 21, 2011
coreldraw graphics suite X5 just installed on Windows 7 background and page are yellow how can i remove this?
View 3 Replies
View Related
Dec 27, 2013
I have the entire subscription of 'Corel 6X'. I have been using it for a few months with no problems, even after I did the 8.1 update. Now all programs will load and run except for 'Draw 6X', it starts to load and then it will start to 'load environment' and then crash. As I said above, every other part of the suite open and run fine.
I can give you no information about updates or version as it won't load so I could check for updates. I searched for other post, and it returned no other similar problems listed for 'Draw 6X'. If I get no answers I'll just un/re install that program itself and see if that fixes things.
I am on a Dell PC with plenty of everything running Win 8.1 64 bit and running the online yearly subscription of 'CorelDraw 6X' 64 bit version that was up to date and working fine on 8.1 fine for more than a month. Now the 'splash' screen shows and gets to 'loading environment' and then the quaint Win window comes out 'There is a problem and windows has to close this program'.
"The only way is through!"cb'99'
View 3 Replies
View Related
Jun 17, 2012
So picture that you have designed something in Corel. Let's say an invitation. I go to put text or a graphic on top, and nothing is going on top. My text is behind. Nothing i do works. (ex. ctrl-pgup, object in front of.... etc.)
Is there some feature that I possibly touched?
View 4 Replies
View Related
Apr 6, 2012
I have been upgrading to X6 from X5. I wanted to install a CorelDRAW macro called "Function Plotter", written by Alex Vakulenko, into X6. When upgrading from X4 to X5 I just manually placed a certain file (Plotter14.gms) into the Draw GMS folder in the program directory. Then back in CorelDRAW X5 I choose Tools > Options > Customization > Commands in order to place an icon in the toolbar, making access to the macro. It worked back then. However when I try the same procedure in X6 it doesn't work. I can see the file under "Commands" and place an icon, but nothing happens when I press the button. Maybe it has something to do with 64 bit, which from what I can see in this Forum causes a lot of trouble (scanner drivers, plugins, etc)?
This macro is extremely important for me. I have tried contacting Alex, but with no success so far. In the meanwhile I need to install X5 again..
View 5 Replies
View Related
Mar 27, 2012
Go to Tools/Options/Workspce/Customization/Commands/Text and drag the Line (Line Spacing) icon on to a toolbar. The Change Document Defaults dialog opens with various options available. If I click on any of the check boxes or the Ok, Cancel, or Help buttons, nothing happens. The only button that works is the Close button (top-right button with the X in it).
View 3 Replies
View Related
Nov 16, 2011
how does the erase tool work in Corel Graphics X5? I click on it and drag it around the areas I want to erase, and all I get is a new line showing me where i've dragged the eraser around.
View 4 Replies
View Related
Apr 30, 2011
I just upgraded from XP to Win7 64-bit. I’m using Corel Photo-Paint 12, but I had the same issue with the trial version of X5 that I downloaded a few days back.
Basically autocomplete works with my other programs but it won't work in Corel. Below is a pic of what it's doing (top) and what it should do (bottom).
View 14 Replies
View Related
May 14, 2013
Corel Capture X6 wont work, i got message then i decide to choose user define but there is no option except shift+ F7 "Dream and never stop dreaming, cause dreams always available for free".
View 11 Replies
View Related
Nov 6, 2011
I have a problem getting my 'What the Font' tool to work - we got a couple of new computers in our art dept a few months ago and ever since then when trying to use this tool I get a message saying 'this hotkey is being used already by this system Please choose another one' , we do have other hotkeys set up for our system but on our older computers we never got this conflict running the same hotkeys.
View 12 Replies
View Related
Mar 7, 2012
I'm running on a fairly new Dell Studio laptop computer with Windows 7 Pro as the OS.The font was installed using the normal install font directions.
As stated above the font works fine in Adobe Illustrator and Microsoft Word.It shows as installed in Corel Draw font menu but will not print when trying to type, the curser just blinks.
I also have 2 desktop computers running Windows XP Pro OS where the font works perfectly in all programs.
View 14 Replies
View Related
Feb 21, 2013
Error Message.jpg
Please find the attached "Error Message.jpg" file.I am getting that Error Message while trying to Uninstall "CorelDRAW Graphics Suite X6" on a Windows XP Desktop Computer. This Computer belongs to other person. I am getting the same Error Message upon trying to Re-Install CorelDRAW Graphics Suite X6.How do I successfully Uninstall and Re-Install?
View 6 Replies
View Related
Jun 2, 2012
I am having a problem of previewing clip art in my preview window. I used to be able to review a thumb nail of either a object, photo, or clip art prior to importing it on my page. Is there a configuration I must follow. Tried everything from properties and other trial and error methods.
View 1 Replies
View Related
May 30, 2011
I was experimenting a little bit with the dockers at the right side of the workspace of Corel Draw X5 and now for some reason when I go to "Window" and select a new docker to open, the new docker appears not nested with the rest as it did before, but as new floating window so I have to add it to the rest as a tab manually which is not handy. Up to now each new docker would appear already nested. This is annoying because I really liked the way the dockers appear nested in tabs in X5.
How I can make the dockers appear again tabbed once I open them?
View 3 Replies
View Related