How can I make an imported scan of a line drawing "transparent" and add color fills to various sections, using the freehand tool ? I have done this many times with an older version of CorelDraw, but in CorelDraw- x5 the
imported scan includes a white background (even when I select NO FILL), so that my freehand tool selections are either on top of, or hidden behind the white background.
I have imported a 2d drawing of a vehicle into coral draw x5 from auto cad. Problem is that when I zoom in all the lines do not seem to be joined especially curves, this in turn makes it a pain when filling with colour. I have recently traced one side manually using line and curve tools but my question is, is there s quicker way of tracing a dxf without manually doing it? And if so how to do it?
View 4 Replies View RelatedIn CDraw X5 I can choose line styles. But I would like to add some more styles (and to remove some that I never use).I only found a possibility to create new styles based on a kind of a pixel approach: A one-by-many array of single squares can be marked to be coloured of white, producing dashed lines with any kind of dash length.Also, the dash "frequency" seems to be dictated by the line width only; I do not manage to make thin dashed lines with a reasonably visible dash frequency.
However, I would like to make line consisting of other shapes, like circles, triangles, diamonds, etc., either filled or "open". Or make thin dashed lines with user-specifiec dash and space lengths that do not change when changing the line width. Is this possible?
Also, multi-colour dashes – with e.g. odd-numbered dashes in one colour and even-numbered ones in another color – might be useful.
In the current version, however, the number of dash schemes available is big enough to be confusing. Especially when the line is made relatively wide – say, 0,5 .. 1 mm or so – and I want to make more lines with the same shape, than it is difficult to find again the same shape the list of standard shapes. Is it possible to add names (or numbers, but not just running numbers!) to the shapes, so that a shape can be found again easily?
I copied an Image off the web and am trying to ungroup it and change the the Black images to color...
View 5 Replies View RelatedSay I've drawn a few curves on a layer with the bézier tool, and I want to go back to some that I did earlier and add to them. I'm trying to do this and it won't let me; it wants to start a new line.
View 3 Replies View RelatedI'm trying to get a clean line drawing from a bitmap. I've attached a cdr with a picture in it. I just want the picture to look free-hand drawn with simple lines. When I traced it, it makes jagged edges and seems to be too detailed no matter how I set the trace properties. I cannot draw free-hand myself at all, or I would just re-draw them.
View 10 Replies View RelatedAs an exercise I'm trying to recreate the leaf image in the X5 guidebook ( pages 127 & 128). No problems until I came to drawing the yellow "veins" on the face of the leaf. I need to create lines that start off thin, get thicker in the middle and go back to thin at the other end.
I managed to create the effect by drawing a closed , filled object, and then playing around using the shape tool to achieve the desired result..
Is there a better, quicker way to do this. I tried doing it using the artistic tools but no luck there.
How do I change the properties of a line? I can do it before drawing. What if I want to change after drawing in PhotoPaint?
View 7 Replies View Relatedhow to draw and big fat line - about 24 pt - with rounded ends, then give that line an outline of its own so I can change the 'fill ' - the original line colour - and get an outlined line?
And just for fun, I want the 'fill' to be semi-transparent!
when I switch tab once at the end of the line sits the line break outside of the paragraph text frame..The background color so then runs out of the frame.A wish at left line intent (or right) it should be possible to fill these also with the background color and a function that assigns every second line is a background color..
View 2 Replies View RelatedCannot Scan with either Corel draw x6 / Corel PhotoPaint. The icon is not highlighted
View 15 Replies View RelatedCorel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
I have a JPEG cartoon image (company logo) that I want to import. When I do the logo goes blurry. Not terrible, but when you zoom in, way more blurry than if you opened the picture in Microsoft Picture Manager.
View 6 Replies View RelatedIf I import a custom bitmap into Coreldraw, as linked image, the resulting image is very coarse.
If I import all content, the resolution is preserved.
Is that possible to increase the preciousness of linked images to reflect original?
Marshall's Burger Logo (Red Background).pdf
I receive a PDF file from my client which is their logo.
The text is suppose to be vector, but they appear as bitmap and I cannot apply fill and outline to it.
I can edit the nodes with the Shape Tool after I converted it to AI or EPS format, but still cannot apply fill and outline.
I'm trying to add perspective to photos (JPEG files) imported into CorelDraw.
I want to change a photo so that, rather than facing 'head on', it looks as though it is facing away at an angle.
I can skew basic shapes to give the impression these have perspective but I can not do this with JPEG files. How to acheive this in CorelDraw or CorelPhoto.
I have recently switched from a PC to Mac and reloaded my CorelDraw 11 software onto my Mac. I have been importing tiffs into my document but am unable to use any of effects tools. What I can do to get this software working on my laptop. I am running OSX Leopard.
View 4 Replies View RelatedThe imported file is probably from Illustrator. The vector element in question is text converted to curves with a CMYK bit map fill. CorelDraw X5 seems unable to extract the bitmap fill from the vectors. What's up with this, is there anyway to extract the bitmap fill?
View 3 Replies View RelatedWhen importing a multi-page pdf or ps file into a multi-page document, sometimes the inserted pages will all have their Document Grid layer visibility turned on, even when the existing pages in the document all have it turned off.
If I bring up the object manager, I can go through the affected pages and 'un-eye' them one page at a time. But it's a blooming nuisance, especially when importing dozens of pages at once.
In X5 I had it set up so I could re-size proportionally and it was right under where object properties is now in X6. How I can get my workspace so it's there again? Or at least where I can find the tool that re-sizes proportionally?
View 15 Replies View RelatedI have realised that I did not check the TTF filter on install
Do I have to re-install the whole program again or is there an easier way of just adding it in afterwards. FYI: the TTF optionis not in my Global Filtr Settings list to ad or remove.
how to mirror about a line, but the line was outside the object.
I now have a need to mirror about a line but the line is partially inside the object (so after mirroring the object would be overlapped). When I select both objects and try to create the mirror, the "axis" of the reflection is simply the edge of the object, not the line.
When the line was outside, that worked simply because when you selected both objects the line brought the outside of both selected objects to that point so it simply mirrored / reflected at that point (the line). So the line was not truly acting as a point of reflection. Hope that made sense.
I think I'm about to buy Cadtools from Macromonster but I would like to know if Draw has a way of acheiving this. Hey I may find out Cadtools can't reflect when the line is inside the object.
I would like to add the effect of hand stitched thread around some of my designs. The line tool can change a line to dashes but this is a bit too uniform for hand stitching. I have seen a tutorial on doing this in Photoshop where a brush is made with a few small different length strokes. this is then spaced out and made to follow a path. how to create a hand stitch effect using X5 that looks like natural hand stitching...
View 4 Replies View RelatedI use Coreldraw 11. and how to make one Line connect to another Line?
I know there is a way you select both Lines and have Coreldraw auto connect them?
Wanting add a font to X3 using Vista I've downloaded, extracted but does not see it in X3 so how do I get into X3.Looked in archives for same but no find, stuff like adding in bullets is all, finding using Ctrl+F11.
View 5 Replies View RelatedAny good macro for adding the date and the file name to a page? i've had a hunt on the net but haven't found anything that works with X3, even tried Oberonpalce.
View 12 Replies View RelatedIs there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedI'm out of practice with Corel since it has been several years since using it. I'm trying to create a point on top of a line without adding a point to an existing line but for the life of me I can't figure out how. I know I can create a new line and drag the points to where I want them on the line but I just simply want to create a point on top of the line.
View 10 Replies View RelatedI would like to have a quick way to access some T-Shirt proof images quickly.
What is the best way? Toolbar, docker?
I saw the scrapbook docker, but then I have to scroll through all my files. Not sure if it remembers a folder on open and close..
My document palette adds the same colors that are NEVER in my art every time. I swear it's a glitch. The colors are so bizzare. And when I go to delete any of them, it says I can't because they are in use. But they are for sure not being used.
Here's a list of the colors:
Black A0QM, Pantone 142, Black A0QM (1), Black A0QM (2), Black A0QM (3), DIC 2287p* (1), PANTONE 142 (1), Black A0QM (4), PANTONE 142 (2), Black A0QM (5), Black A0QM (6), Black A0QM (7), DIC 2287p* (1) (1), PANTONE 142 (3)
That's the order they are always in. I don't even know where you would get any of those colors and what they would be used for? Except the Pantone of course.
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]