CorelDRAW X3 :: Printer Prints Off Center - Win7 / Business Inkjet 2230
May 4, 2010
As indicated by title I have just switched to a newer computer from a system using XP and corel draw 8 to a new system using Win7 and corel draw X3 and using the same printer (buisness inkjet 2230). I have never had any problems printing before but now every time i print my pages are offset to the right. The only solution I have found is that I can change the printer page (in print preview) to the left. But though my many attempts to do this works fine, saving it as a default just won't work. After saving as default next time I open a document it switches to old layout. I have even tried going to print defaults folder, deleting all corel's defaults, and then saving and somehow it just reverts back to regular settings. make life simpler than changing print area every time?
View 5 Replies
ADVERTISEMENT
Oct 23, 2011
I have a problem printing bitmap images on CorelDRAW documents in my work computer (Windows Vista Home Premium 32 Bit). I have a HP 3535 inkjet printer, and It was prinitng normally for some time, but one day the printer suddenly stopped printing images from the CorelDRAW documents and only prints text and vector images. The same happens in Photo-Paint, it simply prints in blank.
I Tried to restore the program to default settings using the F8 command with no luck. This really annoying and I need to print bitmaps for my work. This happens in all my documents...
View 4 Replies
View Related
Jan 20, 2009
Designed a business card and want to print to Avery type sheet cards and can't find the Avery selection in my printer settings. Just learnig CD X3
View 8 Replies
View Related
May 29, 2013
In page setup i have setup my page to print 4 business cards on an A4 page. I have customize the labels myself. Then in print preview i have chosen to print the business cards in the center of the page. But the cards are on the bottom left corner and what ever i do it will not change.
maybe i have to change the margins in page setup-customize label? But don't know the inches.
How can i put my 4 business cards in the center of the page to print?
View 5 Replies
View Related
Mar 6, 2013
Will Illustrator CS5 files print on a standard inkjet printer or is some sort of RIP software required? I'm considering an Epson WF-7520.
View 7 Replies
View Related
Oct 6, 2013
I keep trying to print an inkjet on an wide format Epsom and I can get it to lay down heavy ink. I can print it 13 but not in 15.
View 8 Replies
View Related
Sep 12, 2004
I need to print large photos on a small printer and then mount them together on a large board, but no matter how I do it I seem to get either overlap of gaps between the printed photos. I found a good way to mount the photos so the edges of the paper are not too visible (from a distance), but I can still see gaps and overlays. The Photo image has a width of 24 in by 33 in. I'm trying to print it on nine (9) 8X11 papers.
View 2 Replies
View Related
Nov 17, 2013
I have my own party decoration business. I had to stop my printing services because out of the blue one day, my printer just messed up everything. I no longer have it as it broke down, but now I have the same problem with no matter what printer I use to print the same file. It's suppose to print purple, and it prints the purple parts pink. It turns the aqua blue into more of a royal blue. I am using Photoshop 7.0. It also did the same thing to me in CS2.
I have tried 4 different computers, 3 different printers, and 3 different operating systems.
View 6 Replies
View Related
Aug 21, 2013
I have Photoshop CS3. Just got a new HP Photosmart 7520 not good prints results so far. Need to know how to set the printer dialog box to give me best prints.
View 6 Replies
View Related
Sep 17, 2012
Throughout a project using Photoshop CS4, I print out the pages to make a dummy booklet. Once, upon opening the file and wanting to print, the preview window for Epson Stylus Photo R2400 printer showed a color inverse for the entire file. Viewing the images is normal in all ways. I had been making routine nudging, text editing, etc., on various layers and everything looked and behaved fine. It's only in the printing. I looked to see where a correction could be made, but I can't see anything. I tried to have the printer make color adjustments and have Photoshop make them.
View 5 Replies
View Related
Jul 9, 2013
I get a slight difference in color in my prints my when I use LR prifile vs Canon printer managed. The Canon is much truer to what I see on both monitors which, btw, are calibrated. LR throws in a slight magenta cast. Is there a way to correct this?
View 8 Replies
View Related
Apr 1, 2011
I recently installed Win7. I then downloaded the trial version of X5 from Corel's site and tried to install it. The splash screen I get has no caption on the "install" and "cancel" buttons. When I press the "install" button I get nothing, it goes nowhere. When I press the "cancel" button it cancels, moves to a cance screen from where I can only exit by clicking the top right close icon.
View 10 Replies
View Related
Sep 26, 2012
I am preparing some business cards and wish to include a couple of email address as text not as blue, underlined links. They keep showing up as links and I can't seem to find a way of making them just text. I'm rather new at this
View 10 Replies
View Related
Sep 12, 2013
Question: How do I join triangles and squares so that they are symmetrical?
I have a customer for whom I am designing a business card. I am having to reset the business card from a scanned image.
The business card has got angles and triangles on it. Some of the angles have fills. Others do not.
I can use the Shape tool and trace the scanned image of my customer's business card. However, some of the angles are mirrored on either end of the business card. If I trace the scanned image it would be hard to get the angles right.
Basically, how, to work with triangles? I need to join triangles together at angles and so forth so that the business card looks symmetrical.
View 10 Replies
View Related
Dec 1, 2013
I have a document i am designing that has a front and a back to it, its not a business card.
How do i align/position the two sides so i get specific elements where i want them on the back side,
the problem is not with the front and i only need to position the back and specifically, i have checked out the print preview imposition tool and only seems to just print duplicate copies however many times need, unless i used it incorrectly,
I mean i could manually try to set them up and waste a lot of ink and paper positioning the two sides but i believe there is a faster/smarter method to accomplish this.
View 1 Replies
View Related
Mar 16, 2011
qrcode-vcard 970pxpink.png
Customer wants QR code, but when I bring it in I get a white square?
View 1 Replies
View Related
Apr 10, 2009
OS WinXP and Win Vista 64 bit.
To print business cards, I selected Label AVERY 5371 - 2X 3.5 BusCr. Print preview looks good. There is no any visible alignment problems.
When printing is completed (Linen paper AVERY 5371), there is about 2 millimeters alignment problem for each card. I created my own template and the print is with the same results. The printer I use is Canon MP830 ink jet.
View 7 Replies
View Related
Jun 1, 2013
I have CorelDraw Graphics Suite X6. I have created what I want in the end to be a double sided business card. However, when printing I am unable to get what will be the back design to align with the front design. Does Coreldraw have a option of sort to make this happen automatically? Or is there a technique to make this happen?
View 5 Replies
View Related
Jan 30, 2012
I am making new business cards using CorelDraw. When I save the business card to a PDF file and download it to Vistaprint, the text does not look sharp as it does in CorelDraw. Is there a way to download without being blurry?
View 7 Replies
View Related
Jul 18, 2012
Instead of cutting around my design my versacam now prints the cut line. Was fine using Corel12, but have upgraded to X4 recently. How do I get it cutting again? The colour I use for cutting is correctly named and in spot colours.
View 3 Replies
View Related
Jan 10, 2013
I encountered problems with large prints from CorelDRAW X5 and I searched the forum for solutions (and didn't find any just questions with the same basic problem)
Set up:
processor Intel i5
memory 12Gb
Windows Home Premium 64bit
Corel X5 with memory limit patch (description at the end of the post).Every printer is on the network directly, some with fiery controllers other with their own network cards.For a demonstration I loaded a print merge with 2000 pages (but it could have been 20 pages with large graphicsm it would have a very similar result), as seen in the first picture.
When I open the print dialog Corel freezes up (hangs because it's waiting on splwow64.exe) until preflight is finished. If I attempt to modify ANY settings I have a 99% chance to crash the whole application. Depending on spooled file size this may take from 5 minutes to infinity. (picture in second post)
Naturally if for any reason the preflight needs to be generated again the waiting starts again.Also sometimes when I initialize printing, it hangs (third post with pic)And sometimes the preflight is generated incorrectly (as in the first page is printed multiple times and the same amount of pages are missing from the end or other wacky glitches)
So basically is there a way to speed up the preflight generation (as in resolve the splwow64.exe issue or somehow use 100% of the processor since it just using ~35% in my case) ?
Is there a way to only manually initiate a preflight after I set up the printing (not starting automatically when I open the print dialog)?Is there a way to start only a partial preflight ? (in most cases a sample of 5-10 pages from the document is enough to set up printing)I managed to solve a lot of the issues because I started out with CorelDraw crashing from generating the print merges or trying to save them - quite far from slow printing.
So the sum up of the solutions up to this point:
Switch from 32bit windows to 64bit.
Add RAM to a minimum of 8GB
Use memory patch on desired applications so the apps can use up to 4Gb of memory instead of 2Gb.Download patch here: URL.....
Applications (CorelDRW.exe and CorelPP.exe) in C:Program Files (x86)CorelCorelDRAW Graphics Suite X5Programs
And now all that stand in the way of fast printing is windows's 32bit-64bit printing translator
View 2 Replies
View Related
May 14, 2012
I'm trying to print a document that has colour in it and when it comes out of the printer it prints in black and white. I'm not sure what the issue is or what I am missing.
My printer is Canon iR-ADV C5030/5035 UFR II.
View 7 Replies
View Related
Jul 22, 2010
When I put a jpg (or cpt, png, etc) inside a circle (or whatever) using PowerClip, eventually CorelDraw prints out a thin line in one of the jpg borders. The line is not shown in the "printing visualization" thing. I can work around this issue creating a rectangle the same color as the background and placing it over the "inexistent line". This is not only extremely annoying but also makes me waste resources as I have to print the doc again in order to get rid of the misterious line.
When the line show up seems to be random and not linked to anything in particular, like specifically jpgs or cpts. This doesn't happen everytime, wich makes it difficult to identify wtf may be causing it.
This will explain what's going on:
This is the jpg:
This is the final work:
This is what is printed, note the line on the jpg's top border:
Ok, I didn't actually use PowerClip in that, but it illustrates the point. For some reason the colors f up tho.
It's X5 on a Windows XP computer.
View 5 Replies
View Related
Jun 28, 2012
I create an original art in X5--I use a backround texture fill- (DRAPES)--my vector art prints complete-but the texture fill backround only prints in sections--maybe the size I am printing (13 x 19) is a problem??
View 4 Replies
View Related
Oct 24, 2013
I've designed a simple graphic in X6 and printed directly to Roland ecosol printer. My black text doesn't show up on the print. I've spent a few hours and a lot of paper trying to figure this out.
The black text that isn't showing up is designed to be on top of a yellow box. When I print as intended, the text doesn't show. However, when I move the text off the box, it is printed and visible. Is it a document setup, color management, or print settings issue? Or none of the above?
View 8 Replies
View Related
Jun 23, 2011
I print to a Canon Colour Image Runner printer. The default colour setting is set to mono.
I've noticed when I open a colour image in Coreldraw, navigate to Print Setup, change the job settings to Colour, then print, it still comes out mono, or sometimes come out as a random combination of both mono and colour.
I've found this to be caused the setting called 'Output colour bitmaps as'. This appears to set itself to match the default printer settings on the host pc. Ie my printer is set to Mono by default, hence the above setting sets itself to Grayscale to match. If i choose to print my Coreldraw document in colour, the above mentioned setting remains set to Grayscale, hence the printed output is for bitmaps is grayscale, not colour as i selected.
Likewise if i change my printer defaults to colour, the 'Output colour bitmaps as' setting changes itself to RGB, and then there is no problem.
I assume this is a bug, as if one of my users chooses to print a document in colour, then it should come out in colour. It shouldn't be necessary to change *another* setting to achieve this.
View 1 Replies
View Related
Aug 6, 2013
I'm trying to print colour to my epsom inkjet but for some reason Illustrator keeps converting my colour image to greyscale.
Now I've been using Illustrator for years and this is a new problem I've not come across before. Is there something I can do to stop it doing it - maybe there's a setting that has accidentally switched on that converts all to greyscale.
If not then I suppose I'll have to revert to "turning it on and off again"!
View 3 Replies
View Related
Jul 12, 2013
Tried the same image printed using corel and Photoshop. same setup: let software handle color, color off in printer, same profiles and settings otherwise. the corel print is a bit darker and some colors are slightly different than the same image printed thru Photoshop.
I usually print designs created in corel as there is added text and graphic elements. Can't print those using PS. just odd there is noticeable color variations.
View 4 Replies
View Related
Mar 30, 2011
I can't see the text in several paragraph text boxes but they print fine. The outline is red on-screen but the contents aren't visable unless I print it.
Can I do something to the file, clean it, save as, reindex it, re-build it ?
View 6 Replies
View Related
Apr 3, 2012
I have been using Corel for printing customized shipping labels and flyers in B & W. I use Arial or Times New Roman ttf fonts for printing labels and texts and print out with a laser printer. I did not have any problem in the past up to CorelDraw X4. . All text came out black with X4. Recently, i upgraded to Coreldraw X5. When I printed shipping labels and texts with X5 in the same way as I have been doing with X4, the labels came out in faint prints. I could not use shipping labels printed with X5 for mailing out. I repeated installing X4 and X5. I see that something is wrong with X5. All labels and simple text prints are faint with X5. On the other hand, printing with X4 came out charcoal dark. I installed X5 on both home and office computers. Both gave the idential results. My computer runs Windows 7 professional. Printers are HP (office) or Samsung (home) laser printers. How to make prints darker? I am only concerned B & W print (not color because I did not try color printing yet).
View 6 Replies
View Related
May 23, 2012
I have 17 printers installed. all but 2 use match orientation. The Canon W6400PG and the MP 5500 use printer orientation. Is there a way to change those 2 to match all the others that work just fine? The default is the HP LaserJet 1200 Series PCL 5.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
View 8 Replies
View Related
