I'm trying to print a document that has colour in it and when it comes out of the printer it prints in black and white. I'm not sure what the issue is or what I am missing.
My printer is Canon iR-ADV C5030/5035 UFR II.
I printed a black and white scanned (gray scale) image on Saturday, no problems.
On Sunday I noticed a small hairline from the negative, cloned it out and reprinted. The image had acquired a distinct purple cast. All attempts ticking a variety of appropriate (and possibly inappropriate) boxes in PS and the printer options failed to remove the cast. Rescanning and the cast is still there. Printing on another printer (HP) and the cast is there, so I presume it's source is Photoshop (CS).
How do I change colour and black & white bitmap image to sepia?
View 2 Replies View RelatedPhotoshop CS 5.1 only prints in black and white. It is not a new printer (Kodak) and I have printed in color in Photoshop in the past. All other applications will print in color. Have removed the settings folder, but that did not do anything.
View 2 Replies View RelatedI have been merrily taking screen shots for a recent work project, pasting them into Photoshop, adding a touch of sharpening via Highpass filter, and printing them to PDF. suddenly, with the most recent print, I am greeted for the first time with the message "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignore since you are printing to a non-PostScript printer." I also noticed all of my other prints to pdf were 72 dpi, suddenly this one is 121 PPI. The PDF is black and white, although the original document is full color, and it has the moire pattern of a scan taken at the wrong resolution, a pattern of little squares all over.
View 3 Replies View RelatedI have been merrily taking screen shots for a recent work project, pasting them into Photoshop, adding a touch of sharpening via Highpass filter, and printing them to PDF. suddenly, with the most recent print, I am greeted for the first time with the message "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer." I also noticed all of my other prints to pdf were 72 dpi, suddenly this one is 121 PPI. The PDF is black and white, although the original document is full color, and it has the moire pattern of a scan taken at the wrong resolution, a pattern of little squares all over.
Every PDF I save from Photoshop is like this now, filters or no.
What the heck happened? How can I get my pdfs back?
I have many black and white antique prints which I want to colour in photoshop. They are scanned in colour because the paper is old and actually cream and black and white scans of very old paper come out a nasty, dead grey. (Not at all like crisp modern black and white graphics. The etching process of the original means that they are very, very finely detailed.
So far I have been cleaning up the image and then colouring over the top of the black lines. The disadvantage of this is that I lose the sharp blacks. I then go over the important bits with the eraser tool to get the black back but it is very tedious and much is lost. know about opacity and build the colour in opaque layers, and I know the tools to enhance the dark areas such as the dodge tool but these slightly alter the colour and dont restore the blacks lines.
QUESTION: Is there a way to colour in a print and then key out the negative space (white but really cream)and place the cleaned up original black image over the top of the coloured image? This way all the black shading detail would be fresh and clear and the colour will show through.
How to change black and white hand-prints into color for some art work for my kids. I am already able to switch between black and white between the foreground and background, but not able to change all of the black "color" to a different color including all the minor lines on the hand and foot prints.
View 6 Replies View RelatedI print to a Canon Colour Image Runner printer. The default colour setting is set to mono.
I've noticed when I open a colour image in Coreldraw, navigate to Print Setup, change the job settings to Colour, then print, it still comes out mono, or sometimes come out as a random combination of both mono and colour.
I've found this to be caused the setting called 'Output colour bitmaps as'. This appears to set itself to match the default printer settings on the host pc. Ie my printer is set to Mono by default, hence the above setting sets itself to Grayscale to match. If i choose to print my Coreldraw document in colour, the above mentioned setting remains set to Grayscale, hence the printed output is for bitmaps is grayscale, not colour as i selected.
Likewise if i change my printer defaults to colour, the 'Output colour bitmaps as' setting changes itself to RGB, and then there is no problem.
I assume this is a bug, as if one of my users chooses to print a document in colour, then it should come out in colour. It shouldn't be necessary to change *another* setting to achieve this.
i have seen a black and white photo with parts of the photo masked back to the ordinary colour.
eg. the picture is all black and white but the hair and clothes back to colour.
how to achieve black and white photos where either one other colour remains throughout (i.e. everything that was red, stays red, everything else is b&w)....
i found this but it just doesn't work for me
the other thing is how to keep one section coloured (like just one person in a photo, everything else b&w)....is the only way to do this by zooming in and going round painting each pixel of that mask-layer white?
Yesterday when I opened a black and white image from LR4 to Photoshop CS6 they opened as RGB-sRGB, today after doing an update to both photoshop and camera raw they now open up with an embedded profile mismatch of gray gamma with the option to change the working profile to dot gain 20%. I don't recall seeing these options before, looking in edit-colour settings I don't have any options to change to RGB.
I can of course change the settings to RGB in image-mode and also in edit-convert to profile but this would be a real pain to do this everytime I want to work with b/w.
how to colour a b/w drawing?
View 2 Replies View Relatedi am trying to just colour her lips in
View 1 Replies View RelatedHow do I change a colour photo to black and white? I'm embarrassed to ask this but I've spent about an hour going through everything and even looked at the help page. I bet its so simple but I just cant work it out.
View 5 Replies View RelatedI've got an image of a girl in a black dress on a dark background. Which is the best way to turn the dress white/cream?
View 5 Replies View RelatedI have a picture that I would like to make black and white but with some colour. From what I can gather, I've to make the picture black and white and then add the colour to the bits I need after, however, the bit I want to remain in colour is a flower and the way the light hits it, the red is in different shades, making it impossible for me to colour it back exactly how it is.
Is there a simpler way...like select the parts I want to go black and white?
would like to use it to start making my pics stand out more. My first experiment is to make a colour pic into black and white, THEN bring back the original colours in certain parts of the pic. ie i have a pic of an old steam train, and i want to leave the surroundings in colour, but turn the steam train in the picture to black and white. I have been advised on less photoshop specific forums, to turn the whole pic to B&W, then use the history brush to bring back the colour to the parts of the pic i want to be in colour.
View 6 Replies View RelatedI'm using Autocad 2002LT and I have two different drawings to plot. I'm on Windows XP operating system with a TechJet 5536 Plotter (don't laugh it's the only one available.) One drawing is my own work and one is from a supplier they have emailed to me.
When producing a plot of my own drawing, I can easily plot monochrome, the plot style table (pen assignment) is set to monochrome.ctb.
When producing a plot of the suppliers drawing, it will only plot colour even though the plot style table (pen assignment) is set to monochrome.stb.
I can edit the monochrome.ctb colours if I wish to but I do not seem to be able to edit the colours of the monochrome.stb plot style.
I have a clipart picture, which has varying shades of black and white. How do I change the image to pink? I would like to keep the shading. Its a very intricate image of a crown.
View 4 Replies View RelatedI shoot on a Canon 600D in colour JPG mode. The camera is tethered to a laptop that runs some photo booth software. The software takes the images and makes a black and white image from them. After I have finished, I copy the individual (black and white) photos from one computer to another to work on them
My question is this:
When I open up the folder of JPG images or load them into Lightroom (library multi view) on the second computer. The thumbnails appear in colour and then after about 1 second, flick to black and white. When I open up the file in full/single view/windows viewer, the large image is in black and white.
Now given that the colour information is clearly embedded in the file somewhere - is there any way to get the full version in colour?
It's similar to if I shot RAW and it was showing me the embedded JPG preview - but as I say, at no point are the photos shot in RAW.
The colour profile is sRGB.
I am wanting to know what is the term used when you have a mainly black and white photo and wanting to add a bit of colour to a particular thing ie flower, hat etc whilst the rest of the photo remains in black and white. Finally how is this achieved using Photo Elements II.
View 2 Replies View RelatedI'm new to After Effects and am looking for a spefic effect for a video I am making.
I was wanting a circle of colour (not too big) within a black and white video.
this is an example i quickle did on photoshop
I have a Black and White text logo which I want to invert/reverse the colours on. Yes it's that simple, but I can't get paint.net to do it. In the attached file, I need Black to be White, and vice-versa. Anything else needs to be left as it is.
View 2 Replies View Relatedhow to change a colour or black and white photo to sepia
View 1 Replies View RelatedHow do i colour in a black and white digital image. I have never used this programme before.
View 4 Replies View RelatedI'm new to Elements 10, and was wondering how to produce an image that is in black and white but, say, have a flower in colour?
View 2 Replies View RelatedI want to know how to make a photo black and white with just one thing in colour (like a belt) . I have photoshop elements 12.
View 2 Replies View RelatedWhat is the best process to convert colour images to black & white using PSE11?
View 2 Replies View RelatedThe instructions say <<< In the Background panel, select the Background Color option and click the color swatch to choose the color. >>> But I can't seem to find any way of changing the background colour from the default, white. ! (I want black.)
View 9 Replies View RelatedI am trying to change one object of my picture to colour while the rest remains black and white.
View 4 Replies View Related
