CorelDRAW Graphics Suite X5 :: Faint Printing - How To Make Prints Darker
Apr 3, 2012
I have been using Corel for printing customized shipping labels and flyers in B & W. I use Arial or Times New Roman ttf fonts for printing labels and texts and print out with a laser printer. I did not have any problem in the past up to CorelDraw X4. . All text came out black with X4. Recently, i upgraded to Coreldraw X5. When I printed shipping labels and texts with X5 in the same way as I have been doing with X4, the labels came out in faint prints. I could not use shipping labels printed with X5 for mailing out. I repeated installing X4 and X5. I see that something is wrong with X5. All labels and simple text prints are faint with X5. On the other hand, printing with X4 came out charcoal dark. I installed X5 on both home and office computers. Both gave the idential results. My computer runs Windows 7 professional. Printers are HP (office) or Samsung (home) laser printers. How to make prints darker? I am only concerned B & W print (not color because I did not try color printing yet).
View 6 Replies
ADVERTISEMENT
Jul 12, 2013
Tried the same image printed using corel and Photoshop. same setup: let software handle color, color off in printer, same profiles and settings otherwise. the corel print is a bit darker and some colors are slightly different than the same image printed thru Photoshop.
I usually print designs created in corel as there is added text and graphic elements. Can't print those using PS. just odd there is noticeable color variations.
View 4 Replies
View Related
Apr 3, 2013
can i make halftones from a cdr file to make printing offset plates?
View 3 Replies
View Related
Mar 19, 2013
I'm having issues printing layouts to full colour. I've Exported to PDF and plotted to a printer and the same things keep happening. The Polylines and hatching keep being faded whilst printing. I've checked lineweights, I've turned off everything to do with fading - even layer managers setting fade slide bar is turned off. I've massed with plot styles and still it is happening.
View 9 Replies
View Related
Jun 3, 2013
My problem is when I design something on CorelDraw X6, the CMYK colors look good but when I print the project at Walmart, the colors are richer/darker looking and or some of the colors are off. The Walmart I send my files to uses an Epson 7890 printer and Kodak Color Edge EKTA photo paper.
I've calibrated my monitor so I don't believe that is the issue. The color profile it's set to now is sRGB and the preset is North American General Purpose. I've also called Epson and they told me to call Kodak which I did and the Kodak person told me to contact the Corel People. I figured I'd tap into the CorelDraw Forum collective wisdom first before trying support.
View 15 Replies
View Related
Oct 24, 2013
I've designed a simple graphic in X6 and printed directly to Roland ecosol printer. My black text doesn't show up on the print. I've spent a few hours and a lot of paper trying to figure this out.
The black text that isn't showing up is designed to be on top of a yellow box. When I print as intended, the text doesn't show. However, when I move the text off the box, it is printed and visible. Is it a document setup, color management, or print settings issue? Or none of the above?
View 8 Replies
View Related
Mar 30, 2011
I can't see the text in several paragraph text boxes but they print fine. The outline is red on-screen but the contents aren't visable unless I print it.
Can I do something to the file, clean it, save as, reindex it, re-build it ?
View 6 Replies
View Related
May 9, 2011
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
View 14 Replies
View Related
May 11, 2011
I have a design on one layer, and a boundary line around the design on another layer. visually on the screen they both line up . However, when I print the images, they do not line up - they are significantly out of line with each other. It is as if they have been printed to different paper settings., for example the registration marks are not line up.
View 10 Replies
View Related
Jan 12, 2012
I have just had to install Windows 7 64 bit and now find that when I print to my HP Business Inkjet 2300, I can only print 1 page. If I set the quantity to 5, I still get just 1 page. HP won't be updating the driver as they say that the printer is obsolete although they are still selling it.
View 2 Replies
View Related
Jun 18, 2012
Have created a customised label equivalent to Avery L6008 - very small labels 7 across and 27 labels down. Prints perfectly. However, I would like to be able to vary the design and print different labels across the 7 columns. Either at the creation stage - use the template and select which column is utilised or at the printing stage restrict the printing to 1 column only. Does this make sense?
These are for some Geocaching buddies who want their own name on the labels and a full sheet of 189 labels is too much.
View 2 Replies
View Related
May 7, 2011
I'm using Corel X3 graphics. Windows Vista. HP officejet pro 8500a premium printer. I'm trying to print a file I used to print all the time. It's a map with bitmaps. I must have accidently changed some settings in CDX3 because now it prints too large--it won't even fit on the page. I've tried changing every print setting that relates...Fit to Page, etc. I also restarted corel while holding down the F8 key to reset the factory defaults. I've re-installed Corel 3 times! I'm at my wits end.
View 8 Replies
View Related
Nov 14, 2013
I am using X4 for use in my dye sublimation business. I have an image that was provided to me from my customer. I created a template in Coreldraw, sized the photo to fit and power clipped it into the template. I than created the text the customer wanted and placed it over the image. I than grouped everything together and printed the image. When it prints, the only thing that prints is the template border and the text. I than took the same template and text and power clipped a completely different image into it. Sent it to the printer and voila, no problem.
The image the customer sent to me is a .jpg image. I don't understand why it won't print. Is it possible there is some sort of code or something within the image that is preventing it from printing ? It sounds far fetched to me but I had to ask. If I export the completed image as seen on the screen to a Jpeg and view it on the screen, the powerclipped background is there.
View 5 Replies
View Related
Nov 14, 2012
file type: channeled .eps file created in photoshop (my 'goto' for screenprinting seps)
system: windows 7, coreldraw x6
problem: once imported into CorelDraw, in the print dialog the pre flight will analyze the document and it takes forever; if it does not crash, once completed every other function takes forever to edit (Ex: to deselect a spot color will take 15-20 seconds to implement)- then when printing, errors occur.
1) previous versions of Coreldraw does not have this problem
2) this happens with all printers, even pdf print driver.
3) workaround that works: save the channeled eps file as a Photoshop file.
View 2 Replies
View Related
Aug 28, 2013
I do not understand the process to print my document on A3 printer.My document is a small A5 booklet of 8 pages . My layout options are as follows. Map folds Side 105 x 148.5 Binding left.CorelDraw on my desk I have a document giving the property the following 210 x 297 min (A4). When I send my document to print on A3 printer (HP 2800 pcl), I end up with four pages on the first fold of my A3 though logically I should end up with two pages per folds.So what is the right method for this type of work?
View 3 Replies
View Related
Mar 20, 2012
I am creating a brochure in X3 and when I do a test print one of the layers is not printing. Although I have actively used layers in Autocad, I don't mess with them much in CorelDraw. However I do move objects from front to back and vice versa.
When I started having this problem I went to the object properties to see if the layer was turned on. It was. I don't know if it is related but when I do a print preview the whole program becomes uncharacteristically unstable and shuts down.
View 3 Replies
View Related
Mar 8, 2012
I cannot get the printer to print in landscape since we loaded X5.
View 1 Replies
View Related
Apr 6, 2012
When you extract everything from a powerclip, the object that was the powerclip retains it's powerclip state. The biggest problem is when it no longer has any contents, that big X appears across the object to show that it's an empty powerclip. OK, I can deal with that or ignore it, but the problem is, the thing acts like it's part of the object as far as printing goes, and that I can't have. This can't be the way it was originally intended to work? Shouldn't it be just an on-screen indicator, and not a physical part of the object now? I know I can revert the object back to a "normal" object, but it seems to be just another useless step that shouldn't be needed.
What I'd like to see is an option that when a powerclip no longer has any objects inside, it automatically reverts to a normal object like in previous versions of Draw. Of course, it's too late now, that will never happen. If anything, it should be possible to have the empty powerclip X indicator be changed over to a "phantom" object that is only shown on screen and doesn't exist in any other way so that it doesn't print or otherwise effect the drawing.
Great, it shows up in PDFs too. Looks like I'll have to get used to hitting that "No Frame" button every time I hit the "Extract Contents" button. Or maybe I'll write a macro to do both and link it to a toolbar button. Reminds me of a post I made about Corel Script in version 6 (yes, six, not sixteen) where it allowed us to write our own "feature" fixes when options were removed for no good reason.
View 16 Replies
View Related
Jun 16, 2011
I'm printing booklets for our inhouse marketing and to do so (because of the printer I'm using), I have to send the document in reverse order (last page to first page).
I have to print from a PDF and this changes to colours... I don't see anything in Corel I can check so it's done automatically.
View 4 Replies
View Related
Jun 5, 2012
I have a question regarding printing labels. I just want to print labels, for example, in row 3 and 4. I managed to print 1, 2 rows (and then rotate the paper :), how can I print just rows 3 and 4 ? And then just row 5, for example? There is an option imposition in layout which should correct that, but I can't find it? How to set this things? Is even an option for that?
View 6 Replies
View Related
Sep 23, 2011
I tried the cocut software and it worked for about 3 days, now I get the Data in Buffer message on the screen and it does not print. The motors fire up when I try, but it does not cut. XP or Windows &, no difference.
View 2 Replies
View Related
Oct 3, 2013
We are just in the process of setting up Corel X6 for deployment in our office and we are trying to get a handle on the colour settings. We have upgraded from CD11 which had very little in the way of colour management and so we are somewhat inexperienced in how to set up.
We have two production printers an OKI 821 and a Ricoh C820DN which we print to using PCL drivers. We believe that we therefore need to use RGB as our colour mode and use an ICC profile for each printer for colour correction with colour management switched off on the driver. Is this correct? We've had a try this afternoon and the colours on the prints differ greatly from the display (which has been profiled using an xrite i1pro calibrator). They also differ from each other.
The monitor profile is set as the device profile in the windows colour system, and we are using that as our engine in corel.
View 1 Replies
View Related
Jan 15, 2013
Texture fill and a printing problem. They may be related. First, the file I am working with was originally created in Corel 10. I'm using X6 in Windows 8.
It is a map. I have several layers but the two layers I am having trouble with are the continental shelf and the land layers.
I cannot texture fill either in X6. I go through all the steps but the fill will not show on the screen nor will it print. I can fountain fill, solid fill etc .these layers and they will print as filled. This is the same for both printers I have, which are also new with 128MB of memory each.
In addition, I can get a fountain fill to print on the continental shelf layer, but cannot get a fountain fill to print on the land layer; even though the fill shows on the screen. I can get a solid fill to print on the land layer.
I've the objects in the proper order, the print is turned on for all these layers, etc.
View 6 Replies
View Related
Jun 3, 2013
Print preview shows objects spaced correctly. But when it prints them, it compresses them together on the page (but the objects are sized correctly).
When I print the same file from a different computer on the network to the same printer, the objects are spaced correctly.
Which leads me to conclude it's a setting in CorelDraw on the first computer. Also, I reset all the default settings in CorelDraw using the F8 technique, but that didn't solve the problem.
View 7 Replies
View Related
Jun 25, 2013
printing to the Mimaki CJV30-160. I am looking for the most efficient way of printing multiple contour cut decals.
View 14 Replies
View Related
Oct 18, 2011
I have gone from X13 to X15. With x15 all my text prints grey. This happens with both printers I use. If using x15 and saving as v13 I can open x13 and the job will print correctly. I am working in Windows 7. I think the problem is with a new printer option that does not come up with x13 but is there in x15 and I don't know what to change.
View 2 Replies
View Related
Jun 26, 2011
how is possible to reduce the printing usage? a friend of mine told me that I have to reduce the percentage of each colour in the image, but first of all I don't know how to do that, and second I don't know if it will modify the image.
View 5 Replies
View Related
Mar 26, 2012
text_problem.cdr
When opening the attached file and printing it to efi/fiery rip (or adobe pdf), some characters are on top of each other. Word spacing is also to large. Printing the same file with X5 without problem. File is originally created in X5. Tried with the new "update text" feature as well, same issue.
View 15 Replies
View Related
Jan 14, 2013
I have a drawing that ive set all the lineweights and types to by layer and continuous and then made sure layer is default. The problem is now ONE line in the drawing appears thicker and when i print it out it appears very faint.
View 5 Replies
View Related
Mar 17, 2011
I'm trying to print to a xerox colorqube 8570 in black and white from coreldraw graphics suite X5 using Windows7 64 bit. It works in XP. When I select print, preferences, Print quality, Fast color, Color Options, Black & white it prints in color, what xerox drivers I need and how do I set them up? or is it a setting in X5 I need to adjust?
View 5 Replies
View Related
Aug 8, 2011
I'm receiving PDF files for screen printing. How do I convert to Corel Draw in order to print?
View 12 Replies
View Related
