I'm printing booklets for our inhouse marketing and to do so (because of the printer I'm using), I have to send the document in reverse order (last page to first page).
I have to print from a PDF and this changes to colours... I don't see anything in Corel I can check so it's done automatically.
In CorelDraw x6 the drop down list of fonts in now out of alphabetical order. The order seems completely random and I can not tell what order it has decided to use. Is there a solution to this error?
View 12 Replies View RelatedHow can I have the numbers in order ,Without typing them ( like in Excel )?
for example: having numbers from 1 to 1000 without typing them
I'm working on a book that has watermark on all pages and jpegs too of a4 size. Working in earlier version [x5], I used to overlap all the watermarks which was located in master layer. When I used to import a fresh jpeg on new pages, the watermark went below the jpegs. What i used to do was create a new master layer and then cut pasted the watermark in that layer, and the watermark came above the jpegs in the pages that were added later. In CorelDRAW x6 this i'm not able to do.
The watermark remains bottom of the jpeg, no matter what i do. if i edit the same file in version X5, it works fine and then i get it into x6 and do rest of stuff it works fine. The watermark problem still exists.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I use CDX5 to run our laser engraver. A customer brought us in some plastic sheet he'd like us to laser into small little "lenses" that go over LEDs. These little lenses are roughly .5" square with one radiused corner. The material isn't cheap, so of course the customer wants to minimize waste - I can't spread them out.
I just ctrl-D duplicate them into a tightly packed array and send to the laser... Unfortunately, the material isn't very laser-friendly. It sucks up a lot of heat and starts to bulge, which takes the laser out of focus. I can get decent results by doing a few at a time, but that causes too much waste. If I try to do to many in one area, the bulging leads to ruined parts.
Is there a convenient way in CD to randomize the order of objects? If the laser would cut one over here, then another over there, etc, I think the heat buildup would no longer be a factor, and I wouldn't have to babysit the machine. I thought about doing it manually in Object Manager but, ugh, there are like 384 pieces in the layout.
What determines the order of items shown in the Macro Manager? Is there anyway to have the modules show up in alphabetical order?
View 5 Replies View Relatedmenu.jpg
Is there any way to sort the Flyout Menus in alphabetical order?
Adjusted to the active object layer top / below forward / after layer.The active layer is adjusted to page top / below, forward / after layer.
View 4 Replies View RelatedX5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
I have a design on one layer, and a boundary line around the design on another layer. visually on the screen they both line up . However, when I print the images, they do not line up - they are significantly out of line with each other. It is as if they have been printed to different paper settings., for example the registration marks are not line up.
View 10 Replies View RelatedI have just had to install Windows 7 64 bit and now find that when I print to my HP Business Inkjet 2300, I can only print 1 page. If I set the quantity to 5, I still get just 1 page. HP won't be updating the driver as they say that the printer is obsolete although they are still selling it.
View 2 Replies View RelatedHave created a customised label equivalent to Avery L6008 - very small labels 7 across and 27 labels down. Prints perfectly. However, I would like to be able to vary the design and print different labels across the 7 columns. Either at the creation stage - use the template and select which column is utilised or at the printing stage restrict the printing to 1 column only. Does this make sense?
These are for some Geocaching buddies who want their own name on the labels and a full sheet of 189 labels is too much.
I'm using Corel X3 graphics. Windows Vista. HP officejet pro 8500a premium printer. I'm trying to print a file I used to print all the time. It's a map with bitmaps. I must have accidently changed some settings in CDX3 because now it prints too large--it won't even fit on the page. I've tried changing every print setting that relates...Fit to Page, etc. I also restarted corel while holding down the F8 key to reset the factory defaults. I've re-installed Corel 3 times! I'm at my wits end.
View 8 Replies View RelatedI am using X4 for use in my dye sublimation business. I have an image that was provided to me from my customer. I created a template in Coreldraw, sized the photo to fit and power clipped it into the template. I than created the text the customer wanted and placed it over the image. I than grouped everything together and printed the image. When it prints, the only thing that prints is the template border and the text. I than took the same template and text and power clipped a completely different image into it. Sent it to the printer and voila, no problem.
The image the customer sent to me is a .jpg image. I don't understand why it won't print. Is it possible there is some sort of code or something within the image that is preventing it from printing ? It sounds far fetched to me but I had to ask. If I export the completed image as seen on the screen to a Jpeg and view it on the screen, the powerclipped background is there.
file type: channeled .eps file created in photoshop (my 'goto' for screenprinting seps)
system: windows 7, coreldraw x6
problem: once imported into CorelDraw, in the print dialog the pre flight will analyze the document and it takes forever; if it does not crash, once completed every other function takes forever to edit (Ex: to deselect a spot color will take 15-20 seconds to implement)- then when printing, errors occur.
1) previous versions of Coreldraw does not have this problem
2) this happens with all printers, even pdf print driver.
3) workaround that works: save the channeled eps file as a Photoshop file.
I do not understand the process to print my document on A3 printer.My document is a small A5 booklet of 8 pages . My layout options are as follows. Map folds Side 105 x 148.5 Binding left.CorelDraw on my desk I have a document giving the property the following 210 x 297 min (A4). When I send my document to print on A3 printer (HP 2800 pcl), I end up with four pages on the first fold of my A3 though logically I should end up with two pages per folds.So what is the right method for this type of work?
View 3 Replies View RelatedI am creating a brochure in X3 and when I do a test print one of the layers is not printing. Although I have actively used layers in Autocad, I don't mess with them much in CorelDraw. However I do move objects from front to back and vice versa.
When I started having this problem I went to the object properties to see if the layer was turned on. It was. I don't know if it is related but when I do a print preview the whole program becomes uncharacteristically unstable and shuts down.
I cannot get the printer to print in landscape since we loaded X5.
View 1 Replies View RelatedWhen you extract everything from a powerclip, the object that was the powerclip retains it's powerclip state. The biggest problem is when it no longer has any contents, that big X appears across the object to show that it's an empty powerclip. OK, I can deal with that or ignore it, but the problem is, the thing acts like it's part of the object as far as printing goes, and that I can't have. This can't be the way it was originally intended to work? Shouldn't it be just an on-screen indicator, and not a physical part of the object now? I know I can revert the object back to a "normal" object, but it seems to be just another useless step that shouldn't be needed.
What I'd like to see is an option that when a powerclip no longer has any objects inside, it automatically reverts to a normal object like in previous versions of Draw. Of course, it's too late now, that will never happen. If anything, it should be possible to have the empty powerclip X indicator be changed over to a "phantom" object that is only shown on screen and doesn't exist in any other way so that it doesn't print or otherwise effect the drawing.
Great, it shows up in PDFs too. Looks like I'll have to get used to hitting that "No Frame" button every time I hit the "Extract Contents" button. Or maybe I'll write a macro to do both and link it to a toolbar button. Reminds me of a post I made about Corel Script in version 6 (yes, six, not sixteen) where it allowed us to write our own "feature" fixes when options were removed for no good reason.
I have a question regarding printing labels. I just want to print labels, for example, in row 3 and 4. I managed to print 1, 2 rows (and then rotate the paper :), how can I print just rows 3 and 4 ? And then just row 5, for example? There is an option imposition in layout which should correct that, but I can't find it? How to set this things? Is even an option for that?
View 6 Replies View RelatedI tried the cocut software and it worked for about 3 days, now I get the Data in Buffer message on the screen and it does not print. The motors fire up when I try, but it does not cut. XP or Windows &, no difference.
View 2 Replies View RelatedWe are just in the process of setting up Corel X6 for deployment in our office and we are trying to get a handle on the colour settings. We have upgraded from CD11 which had very little in the way of colour management and so we are somewhat inexperienced in how to set up.
We have two production printers an OKI 821 and a Ricoh C820DN which we print to using PCL drivers. We believe that we therefore need to use RGB as our colour mode and use an ICC profile for each printer for colour correction with colour management switched off on the driver. Is this correct? We've had a try this afternoon and the colours on the prints differ greatly from the display (which has been profiled using an xrite i1pro calibrator). They also differ from each other.
The monitor profile is set as the device profile in the windows colour system, and we are using that as our engine in corel.
Texture fill and a printing problem. They may be related. First, the file I am working with was originally created in Corel 10. I'm using X6 in Windows 8.
It is a map. I have several layers but the two layers I am having trouble with are the continental shelf and the land layers.
I cannot texture fill either in X6. I go through all the steps but the fill will not show on the screen nor will it print. I can fountain fill, solid fill etc .these layers and they will print as filled. This is the same for both printers I have, which are also new with 128MB of memory each.
In addition, I can get a fountain fill to print on the continental shelf layer, but cannot get a fountain fill to print on the land layer; even though the fill shows on the screen. I can get a solid fill to print on the land layer.
I've the objects in the proper order, the print is turned on for all these layers, etc.
Print preview shows objects spaced correctly. But when it prints them, it compresses them together on the page (but the objects are sized correctly).
When I print the same file from a different computer on the network to the same printer, the objects are spaced correctly.
Which leads me to conclude it's a setting in CorelDraw on the first computer. Also, I reset all the default settings in CorelDraw using the F8 technique, but that didn't solve the problem.
printing to the Mimaki CJV30-160. I am looking for the most efficient way of printing multiple contour cut decals.
View 14 Replies View RelatedI have gone from X13 to X15. With x15 all my text prints grey. This happens with both printers I use. If using x15 and saving as v13 I can open x13 and the job will print correctly. I am working in Windows 7. I think the problem is with a new printer option that does not come up with x13 but is there in x15 and I don't know what to change.
View 2 Replies View Relatedhow is possible to reduce the printing usage? a friend of mine told me that I have to reduce the percentage of each colour in the image, but first of all I don't know how to do that, and second I don't know if it will modify the image.
View 5 Replies View Relatedtext_problem.cdr
When opening the attached file and printing it to efi/fiery rip (or adobe pdf), some characters are on top of each other. Word spacing is also to large. Printing the same file with X5 without problem. File is originally created in X5. Tried with the new "update text" feature as well, same issue.
I'm trying to print to a xerox colorqube 8570 in black and white from coreldraw graphics suite X5 using Windows7 64 bit. It works in XP. When I select print, preferences, Print quality, Fast color, Color Options, Black & white it prints in color, what xerox drivers I need and how do I set them up? or is it a setting in X5 I need to adjust?
View 5 Replies View RelatedI'm receiving PDF files for screen printing. How do I convert to Corel Draw in order to print?
View 12 Replies View RelatedWell as much as I do design work for customers for tee shirts,I never had to do color separation, for the screens.I’m wondering how do you do this? ( how do you separate colors in corel, for screen printing) .
View 4 Replies View Related
