CorelDRAW Graphics Suite X3 :: Printing Business Cards - Print Alignment (2 Millimeters)
Apr 10, 2009
OS WinXP and Win Vista 64 bit.
To print business cards, I selected Label AVERY 5371 - 2X 3.5 BusCr. Print preview looks good. There is no any visible alignment problems.
When printing is completed (Linen paper AVERY 5371), there is about 2 millimeters alignment problem for each card. I created my own template and the print is with the same results. The printer I use is Canon MP830 ink jet.
View 7 Replies
ADVERTISEMENT
Jun 1, 2013
I have CorelDraw Graphics Suite X6. I have created what I want in the end to be a double sided business card. However, when printing I am unable to get what will be the back design to align with the front design. Does Coreldraw have a option of sort to make this happen automatically? Or is there a technique to make this happen?
View 5 Replies
View Related
Jan 30, 2012
I am making new business cards using CorelDraw. When I save the business card to a PDF file and download it to Vistaprint, the text does not look sharp as it does in CorelDraw. Is there a way to download without being blurry?
View 7 Replies
View Related
May 29, 2013
In page setup i have setup my page to print 4 business cards on an A4 page. I have customize the labels myself. Then in print preview i have chosen to print the business cards in the center of the page. But the cards are on the bottom left corner and what ever i do it will not change.
maybe i have to change the margins in page setup-customize label? But don't know the inches.
How can i put my 4 business cards in the center of the page to print?
View 5 Replies
View Related
Jun 24, 2013
I am about to print business cards? Where is the best place to get QUALITY (not Vista Print) cards done?
View 14 Replies
View Related
Jan 29, 2004
I have Photoshop 7 and I want to create some business cards in Photoshop and then print them.
How do I set it up so that it will print out on those business card sheets correctly?
View 9 Replies
View Related
Mar 6, 2013
Long-term user of CorelDraw, and have just found Xara P&GD, which is quite a revelation. I've re-designed my business card and how to print to A4, pre-perforated card. CorelDraw can make use of Avery templates for printing the single business card design, multiple times, on the same sheet of card, but I can't find a way to do this with Xara without physically copying the design to make a composite A4 layout. Can Xara do this the "template" way?
View 9 Replies
View Related
Oct 28, 2012
I'm designing business cards and made my image to scale but when I try to print it says there are resolution problems. I'm not sure what to do. I set the print size to 3.5 inches wides by 2 inches tall but every time I upload it to the print company it say low resolution poor quality.
View 2 Replies
View Related
Apr 12, 2005
i have created a business card for a client. i made it 3.5 in wide and 2 in high. i also added 1/8 in on all sides for bleed and cutting. i want to make a page containing 8 cards per page. i went to automate/picture package in p/s cs and found i can make a page, but not with the images sized to make business cards.
View 2 Replies
View Related
Nov 23, 2012
Whenever I perform a PrintMerge the print dialog and its options are reset everytime I leave the print dialog.
Usually you hit print set parameters and hit apply, you now can cancel the dialog and hit print again, your previous settings should still be there. Same goes if you actually print and want to repeat the print process, as long as you dont close the document. This works for normal printing but fails with print merge.
Every time I close the dialog (not the document) all the settings are back to default. This did not happen in X5 and is very annoying since it resets to default even if you actually hit print, forcing you to set the parameters every time.
View 4 Replies
View Related
May 22, 2011
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies
View Related
Sep 26, 2012
I am preparing some business cards and wish to include a couple of email address as text not as blue, underlined links. They keep showing up as links and I can't seem to find a way of making them just text. I'm rather new at this
View 10 Replies
View Related
Jul 16, 2011
I am still using Coreldraw X3 I will be purchasing X5 next month. I need to know how to make a greeting card in X3.
View 1 Replies
View Related
Jan 20, 2009
Designed a business card and want to print to Avery type sheet cards and can't find the Avery selection in my printer settings. Just learnig CD X3
View 8 Replies
View Related
Dec 1, 2013
I have a document i am designing that has a front and a back to it, its not a business card.
How do i align/position the two sides so i get specific elements where i want them on the back side,
the problem is not with the front and i only need to position the back and specifically, i have checked out the print preview imposition tool and only seems to just print duplicate copies however many times need, unless i used it incorrectly,
I mean i could manually try to set them up and waste a lot of ink and paper positioning the two sides but i believe there is a faster/smarter method to accomplish this.
View 1 Replies
View Related
Mar 16, 2011
qrcode-vcard 970pxpink.png
Customer wants QR code, but when I bring it in I get a white square?
View 1 Replies
View Related
Feb 29, 2012
I want to align an object (i.e a rectangle) for example to be in possition x:15cm and y:12,5cm but concerning the edge of the rectangle (or the right/left side of the rectangle) and NOT the center of it.
How to customize the properties of the alignment???
View 7 Replies
View Related
May 16, 2013
A few months ago I upgraded my aging office workstation to a powerful new system running Windows 8 Professional. CorelDRAW X5 refused to install under Win 8 Pro so I had to upgrade to CorelDRAW X6.
Here's the issue: for the longest time, at least through 10 or more versions of CorelDRAW, it was very easy to align nodes. Just use the shape tool, manually shift+click nodes into the selection and the last node selected would stay locked in place. The other nodes would use the last node selected as the point of reference and align to it.
That doesn't work anymore in CorelDRAW X6.
Now, it doesn't matter which points were clicked first or last. The alignment function always uses the earliest point created in the path as the reference point. And that's just downright useless. I'm forced to drag out guides and snap the points to them -like I'm using an app released in 1990. It makes tasks like technical drawing more time consuming.
Is there some setting buried in Preferences that can restore this very basic but extremely valuable function?
BTW, rival app Adobe Illustrator had finally added controlled anchor point alignment in version CS3 or CS4 (I forget which), but it was a kludge to use -it required extra clicks on anchor points and wouldn't work half the time. The feature seems to be gone in CS6.
View 14 Replies
View Related
May 9, 2011
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
View 14 Replies
View Related
Oct 24, 2012
This is a problem that comes from previous versions. When applying a figure using Wrap resource to a Paragraph Text in columns: most of times the basis of the text is not aligned correctly.
View 2 Replies
View Related
May 11, 2011
I have a design on one layer, and a boundary line around the design on another layer. visually on the screen they both line up . However, when I print the images, they do not line up - they are significantly out of line with each other. It is as if they have been printed to different paper settings., for example the registration marks are not line up.
View 10 Replies
View Related
Jan 12, 2012
I have just had to install Windows 7 64 bit and now find that when I print to my HP Business Inkjet 2300, I can only print 1 page. If I set the quantity to 5, I still get just 1 page. HP won't be updating the driver as they say that the printer is obsolete although they are still selling it.
View 2 Replies
View Related
Jun 18, 2012
Have created a customised label equivalent to Avery L6008 - very small labels 7 across and 27 labels down. Prints perfectly. However, I would like to be able to vary the design and print different labels across the 7 columns. Either at the creation stage - use the template and select which column is utilised or at the printing stage restrict the printing to 1 column only. Does this make sense?
These are for some Geocaching buddies who want their own name on the labels and a full sheet of 189 labels is too much.
View 2 Replies
View Related
May 7, 2011
I'm using Corel X3 graphics. Windows Vista. HP officejet pro 8500a premium printer. I'm trying to print a file I used to print all the time. It's a map with bitmaps. I must have accidently changed some settings in CDX3 because now it prints too large--it won't even fit on the page. I've tried changing every print setting that relates...Fit to Page, etc. I also restarted corel while holding down the F8 key to reset the factory defaults. I've re-installed Corel 3 times! I'm at my wits end.
View 8 Replies
View Related
Nov 14, 2013
I am using X4 for use in my dye sublimation business. I have an image that was provided to me from my customer. I created a template in Coreldraw, sized the photo to fit and power clipped it into the template. I than created the text the customer wanted and placed it over the image. I than grouped everything together and printed the image. When it prints, the only thing that prints is the template border and the text. I than took the same template and text and power clipped a completely different image into it. Sent it to the printer and voila, no problem.
The image the customer sent to me is a .jpg image. I don't understand why it won't print. Is it possible there is some sort of code or something within the image that is preventing it from printing ? It sounds far fetched to me but I had to ask. If I export the completed image as seen on the screen to a Jpeg and view it on the screen, the powerclipped background is there.
View 5 Replies
View Related
Nov 14, 2012
file type: channeled .eps file created in photoshop (my 'goto' for screenprinting seps)
system: windows 7, coreldraw x6
problem: once imported into CorelDraw, in the print dialog the pre flight will analyze the document and it takes forever; if it does not crash, once completed every other function takes forever to edit (Ex: to deselect a spot color will take 15-20 seconds to implement)- then when printing, errors occur.
1) previous versions of Coreldraw does not have this problem
2) this happens with all printers, even pdf print driver.
3) workaround that works: save the channeled eps file as a Photoshop file.
View 2 Replies
View Related
Aug 28, 2013
I do not understand the process to print my document on A3 printer.My document is a small A5 booklet of 8 pages . My layout options are as follows. Map folds Side 105 x 148.5 Binding left.CorelDraw on my desk I have a document giving the property the following 210 x 297 min (A4). When I send my document to print on A3 printer (HP 2800 pcl), I end up with four pages on the first fold of my A3 though logically I should end up with two pages per folds.So what is the right method for this type of work?
View 3 Replies
View Related
Mar 20, 2012
I am creating a brochure in X3 and when I do a test print one of the layers is not printing. Although I have actively used layers in Autocad, I don't mess with them much in CorelDraw. However I do move objects from front to back and vice versa.
When I started having this problem I went to the object properties to see if the layer was turned on. It was. I don't know if it is related but when I do a print preview the whole program becomes uncharacteristically unstable and shuts down.
View 3 Replies
View Related
Mar 8, 2012
I cannot get the printer to print in landscape since we loaded X5.
View 1 Replies
View Related
Apr 6, 2012
When you extract everything from a powerclip, the object that was the powerclip retains it's powerclip state. The biggest problem is when it no longer has any contents, that big X appears across the object to show that it's an empty powerclip. OK, I can deal with that or ignore it, but the problem is, the thing acts like it's part of the object as far as printing goes, and that I can't have. This can't be the way it was originally intended to work? Shouldn't it be just an on-screen indicator, and not a physical part of the object now? I know I can revert the object back to a "normal" object, but it seems to be just another useless step that shouldn't be needed.
What I'd like to see is an option that when a powerclip no longer has any objects inside, it automatically reverts to a normal object like in previous versions of Draw. Of course, it's too late now, that will never happen. If anything, it should be possible to have the empty powerclip X indicator be changed over to a "phantom" object that is only shown on screen and doesn't exist in any other way so that it doesn't print or otherwise effect the drawing.
Great, it shows up in PDFs too. Looks like I'll have to get used to hitting that "No Frame" button every time I hit the "Extract Contents" button. Or maybe I'll write a macro to do both and link it to a toolbar button. Reminds me of a post I made about Corel Script in version 6 (yes, six, not sixteen) where it allowed us to write our own "feature" fixes when options were removed for no good reason.
View 16 Replies
View Related
Nov 6, 2013
I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
View 7 Replies
View Related
